diff --git a/Marlin/src/HAL/HAL_AVR/HAL.h b/Marlin/src/HAL/HAL_AVR/HAL.h
index e6d9683675..d739a379e8 100644
--- a/Marlin/src/HAL/HAL_AVR/HAL.h
+++ b/Marlin/src/HAL/HAL_AVR/HAL.h
@@ -91,19 +91,19 @@ typedef int8_t pin_t;
   #define NUM_SERIAL 1
 #else
   #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from -1 to 3"
+    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
 
   #define MYSERIAL0 customizedSerial1
 
   #ifdef SERIAL_PORT_2
     #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from -1 to 3"
+      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
     #elif SERIAL_PORT_2 == SERIAL_PORT
-      #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
+      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
     #endif
-    #define NUM_SERIAL 2
     #define MYSERIAL1 customizedSerial2
+    #define NUM_SERIAL 2
   #else
     #define NUM_SERIAL 1
   #endif
diff --git a/Marlin/src/HAL/HAL_DUE/HAL.h b/Marlin/src/HAL/HAL_DUE/HAL.h
index 64cff24665..3f38ae0a36 100644
--- a/Marlin/src/HAL/HAL_DUE/HAL.h
+++ b/Marlin/src/HAL/HAL_DUE/HAL.h
@@ -56,8 +56,7 @@
 #ifdef SERIAL_PORT_2
   #if SERIAL_PORT_2 == SERIAL_PORT
     #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
-  #endif
-  #if SERIAL_PORT_2 == -1
+  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 customizedSerial2
   #elif SERIAL_PORT_2 == 0
     #define MYSERIAL1 Serial
diff --git a/Marlin/src/HAL/HAL_ESP32/HAL.h b/Marlin/src/HAL/HAL_ESP32/HAL.h
index df9a5648c8..b5f2d3e204 100644
--- a/Marlin/src/HAL/HAL_ESP32/HAL.h
+++ b/Marlin/src/HAL/HAL_ESP32/HAL.h
@@ -48,8 +48,8 @@ extern portMUX_TYPE spinlock;
 #define MYSERIAL0 flushableSerial
 
 #if ENABLED(WIFISUPPORT)
-  #define NUM_SERIAL 2
   #define MYSERIAL1 webSocketSerial
+  #define NUM_SERIAL 2
 #else
   #define NUM_SERIAL 1
 #endif
diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL.h b/Marlin/src/HAL/HAL_LPC1768/HAL.h
index 1648905453..a85379ad99 100644
--- a/Marlin/src/HAL/HAL_LPC1768/HAL.h
+++ b/Marlin/src/HAL/HAL_LPC1768/HAL.h
@@ -61,10 +61,6 @@ extern "C" volatile uint32_t _millis;
   #define ST7920_DELAY_3 DELAY_NS(750)
 #endif
 
-#if !WITHIN(SERIAL_PORT, -1, 3)
-  #error "SERIAL_PORT must be from -1 to 3"
-#endif
-
 #if SERIAL_PORT == -1
   #define MYSERIAL0 UsbSerial
 #elif SERIAL_PORT == 0
@@ -75,16 +71,14 @@ extern "C" volatile uint32_t _millis;
   #define MYSERIAL0 MSerial2
 #elif SERIAL_PORT == 3
   #define MYSERIAL0 MSerial3
+#else
+  #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if !WITHIN(SERIAL_PORT_2, -1, 3)
-    #error "SERIAL_PORT_2 must be from -1 to 3"
-  #elif SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
-  #endif
-  #define NUM_SERIAL 2
-  #if SERIAL_PORT_2 == -1
+  #if SERIAL_PORT_2 == SERIAL_PORT
+    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
+  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 UsbSerial
   #elif SERIAL_PORT_2 == 0
     #define MYSERIAL1 MSerial
@@ -94,7 +88,10 @@ extern "C" volatile uint32_t _millis;
     #define MYSERIAL1 MSerial2
   #elif SERIAL_PORT_2 == 3
     #define MYSERIAL1 MSerial3
+  #else
+    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
   #endif
+  #define NUM_SERIAL 2
 #else
   #define NUM_SERIAL 1
 #endif
diff --git a/Marlin/src/HAL/HAL_SAMD51/HAL.h b/Marlin/src/HAL/HAL_SAMD51/HAL.h
index dea84da5d1..9551352200 100644
--- a/Marlin/src/HAL/HAL_SAMD51/HAL.h
+++ b/Marlin/src/HAL/HAL_SAMD51/HAL.h
@@ -33,11 +33,9 @@
   #include "MarlinSerial_AGCM4.h"
 
   // Serial ports
-  #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from -1 to 3"
-  #endif
 
   // MYSERIAL0 required before MarlinSerial includes!
+
   #if SERIAL_PORT == -1
     #define MYSERIAL0 Serial
   #elif SERIAL_PORT == 0
@@ -46,18 +44,16 @@
     #define MYSERIAL0 Serial2
   #elif SERIAL_PORT == 2
     #define MYSERIAL0 Serial3
-  #else
+  #elif SERIAL_PORT == 3
     #define MYSERIAL0 Serial4
+  #else
+    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
 
   #ifdef SERIAL_PORT_2
-    #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from -1 to 3"
-    #elif SERIAL_PORT_2 == SERIAL_PORT
-      #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
-    #endif
-    #define NUM_SERIAL 2
-    #if SERIAL_PORT_2 == -1
+    #if SERIAL_PORT_2 == SERIAL_PORT
+      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
+    #elif SERIAL_PORT_2 == -1
       #define MYSERIAL1 Serial
     #elif SERIAL_PORT_2 == 0
       #define MYSERIAL1 Serial1
@@ -65,9 +61,12 @@
       #define MYSERIAL1 Serial2
     #elif SERIAL_PORT_2 == 2
       #define MYSERIAL1 Serial3
-    #else
+    #elif SERIAL_PORT_2 == 3
       #define MYSERIAL1 Serial4
+    #else
+      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
     #endif
+    #define NUM_SERIAL 2
   #else
     #define NUM_SERIAL 1
   #endif
diff --git a/Marlin/src/HAL/HAL_STM32/HAL.h b/Marlin/src/HAL/HAL_STM32/HAL.h
index 910d437bd6..b27e5c6d62 100644
--- a/Marlin/src/HAL/HAL_STM32/HAL.h
+++ b/Marlin/src/HAL/HAL_STM32/HAL.h
@@ -44,13 +44,8 @@
 // ------------------------
 
 #if SERIAL_PORT == 0
-  #error "Serial port 0 does not exist"
-#endif
-
-#if !WITHIN(SERIAL_PORT, -1, 6)
-  #error "SERIAL_PORT must be from -1 to 6"
-#endif
-#if SERIAL_PORT == -1
+  #error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
+#elif SERIAL_PORT == -1
   #define MYSERIAL0 SerialUSB
 #elif SERIAL_PORT == 1
   #define MYSERIAL0 Serial1
@@ -64,20 +59,17 @@
   #define MYSERIAL0 Serial5
 #elif SERIAL_PORT == 6
   #define MYSERIAL0 Serial6
+#else
+  #error "SERIAL_PORT must be from -1 to 6. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == 0
-    #error "Serial port 0 does not exist"
-  #endif
-
-  #if !WITHIN(SERIAL_PORT_2, -1, 6)
-    #error "SERIAL_PORT_2 must be from -1 to 6"
-  #elif SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
-  #endif
   #define NUM_SERIAL 2
-  #if SERIAL_PORT_2 == -1
+  #if SERIAL_PORT_2 == 0
+    #error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
+  #elif SERIAL_PORT_2 == SERIAL_PORT
+    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
+  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 SerialUSB
   #elif SERIAL_PORT_2 == 1
     #define MYSERIAL1 Serial1
@@ -91,6 +83,8 @@
     #define MYSERIAL1 Serial5
   #elif SERIAL_PORT_2 == 6
     #define MYSERIAL1 Serial6
+  #else
+    #error "SERIAL_PORT_2 must be from -1 to 6. Please update your configuration."
   #endif
 #else
   #define NUM_SERIAL 1
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL.h b/Marlin/src/HAL/HAL_STM32F1/HAL.h
index a88b72107e..fea5ff86e8 100644
--- a/Marlin/src/HAL/HAL_STM32F1/HAL.h
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL.h
@@ -78,13 +78,10 @@
   #define MSerial5  Serial4
 #endif
 
-#if !WITHIN(SERIAL_PORT, -1, 5)
-  #error "SERIAL_PORT must be from -1 to 5"
-#endif
-#if SERIAL_PORT == -1
+#if SERIAL_PORT == 0
+  #error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
+#elif SERIAL_PORT == -1
   #define MYSERIAL0 UsbSerial
-#elif SERIAL_PORT == 0
-  #error "Serial port 0 does not exist"
 #elif SERIAL_PORT == 1
   #define MYSERIAL0 MSerial1
 #elif SERIAL_PORT == 2
@@ -95,19 +92,17 @@
   #define MYSERIAL0 MSerial4
 #elif SERIAL_PORT == 5
   #define MYSERIAL0 MSerial5
+#else
+  #error "SERIAL_PORT must be from -1 to 5. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if !WITHIN(SERIAL_PORT_2, -1, 5)
-    #error "SERIAL_PORT_2 must be from -1 to 5"
+  #if SERIAL_PORT_2 == 0
+    #error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
   #elif SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
-  #endif
-  #define NUM_SERIAL 2
-  #if SERIAL_PORT_2 == -1
+    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
+  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 UsbSerial
-  #elif SERIAL_PORT_2 == 0
-  #error "Serial port 0 does not exist"
   #elif SERIAL_PORT_2 == 1
     #define MYSERIAL1 MSerial1
   #elif SERIAL_PORT_2 == 2
@@ -118,7 +113,10 @@
     #define MYSERIAL1 MSerial4
   #elif SERIAL_PORT_2 == 5
     #define MYSERIAL1 MSerial5
+  #else
+    #error "SERIAL_PORT_2 must be from -1 to 5. Please update your configuration."
   #endif
+  #define NUM_SERIAL 2
 #else
   #define NUM_SERIAL 1
 #endif
diff --git a/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h b/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h
index 0e44df4d11..f4a581991e 100644
--- a/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h
+++ b/Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h
@@ -44,17 +44,12 @@
 // Defines
 // ------------------------
 
-//Serial override
+// Serial override
 //extern HalSerial usb_serial;
 
 #if defined(STM32F4) && SERIAL_PORT == 0
-  #error "Serial port 0 does not exist"
-#endif
-
-#if !WITHIN(SERIAL_PORT, -1, 6)
-  #error "SERIAL_PORT must be from -1 to 6"
-#endif
-#if SERIAL_PORT == -1
+  #error "SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
+#elif SERIAL_PORT == -1
   #define MYSERIAL0 SerialUSB
 #elif SERIAL_PORT == 1
   #define MYSERIAL0 SerialUART1
@@ -68,19 +63,16 @@
   #define MYSERIAL0 SerialUART5
 #elif SERIAL_PORT == 6
   #define MYSERIAL0 SerialUART6
+#else
+  #error "SERIAL_PORT must be from -1 to 6. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
   #if defined(STM32F4) && SERIAL_PORT_2 == 0
-    #error "Serial port 0 does not exist"
-  #endif
-  #if !WITHIN(SERIAL_PORT_2, -1, 6)
-    #error "SERIAL_PORT_2 must be from -1 to 6"
+    #error "SERIAL_PORT_2 cannot be 0. (Port 0 does not exist.) Please update your configuration."
   #elif SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
-  #endif
-  #define NUM_SERIAL 2
-  #if SERIAL_PORT_2 == -1
+    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
+  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 SerialUSB
   #elif SERIAL_PORT_2 == 1
     #define MYSERIAL1 SerialUART1
@@ -94,7 +86,10 @@
     #define MYSERIAL1 SerialUART5
   #elif SERIAL_PORT_2 == 6
     #define MYSERIAL1 SerialUART6
+  #else
+    #error "SERIAL_PORT_2 must be from -1 to 6. Please update your configuration."
   #endif
+  #define NUM_SERIAL 2
 #else
   #define NUM_SERIAL 1
 #endif
diff --git a/Marlin/src/HAL/shared/backtrace/unwinder.h b/Marlin/src/HAL/shared/backtrace/unwinder.h
index 604854ad0f..cae1379513 100644
--- a/Marlin/src/HAL/shared/backtrace/unwinder.h
+++ b/Marlin/src/HAL/shared/backtrace/unwinder.h
@@ -164,7 +164,7 @@ typedef struct {
  * link register (i.e. not a normal register) and the stack pointer value
  * supplied.
  *
- * -If the program was compiled with -funwind-tables , it will use them to
+ * -If the program was compiled with -funwind-tables it will use them to
  * perform the traceback. Otherwise, brute force will be employed
  * -If the program was compiled with -mpoke-function-name, then you will
  * get function names in the traceback. Otherwise, you will not.
diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
index 439078b51e..7719a2d1c7 100644
--- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
+++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp
@@ -912,7 +912,7 @@ void ST7920_Lite_Status_Screen::on_exit() {
   ncs();
 }
 
-// This is called prior to the KILL screen to
+// Called prior to the KILL screen to
 // clear the screen, preventing a garbled display.
 void ST7920_Lite_Status_Screen::clear_text_buffer() {
   cs();
diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp
index ce0be0e6b3..87094eb804 100644
--- a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp
+++ b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp
@@ -74,7 +74,7 @@ static const uint8_t u8g_dev_st7920_128x64_HAL_init_seq[] PROGMEM = {
 
   0x038,              // 8 Bit interface (DL=1), basic instruction set (RE=0)
   0x00C,              // display on, cursor & blink off; 0x08: all off
-  0x006,              // Entry mode: Cursor move to right ,DDRAM address counter (AC) plus 1, no shift
+  0x006,              // Entry mode: Cursor move to right, DDRAM address counter (AC) plus 1, no shift
   0x002,              // disable scroll, enable CGRAM adress
   0x001,              // clear RAM, needs 1.6 ms
   U8G_ESC_DLY(100),   // delay 100 ms
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
index 1863d0ec29..854b8897b3 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h
@@ -179,5 +179,5 @@
 
 #else
 
-  #error Unknown or no TOUCH_UI_FTDI_EVE board specified. To add a new board, modify "ftdi_eve_boards.h"
+  #error "Unknown or no TOUCH_UI_FTDI_EVE board specified. To add a new board, modify 'ftdi_eve_boards.h'."
 #endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
index d21511856f..c4bf02a87a 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
@@ -1179,7 +1179,7 @@ void CLCD::default_display_orientation() {
       #endif
     }
   #elif ANY(TOUCH_UI_PORTRAIT, TOUCH_UI_MIRRORED)
-    #error PORTRAIT or MIRRORED orientation not supported on the FT800
+    #error "PORTRAIT or MIRRORED orientation not supported on the FT800."
   #elif ENABLED(TOUCH_UI_INVERTED)
     mem_write_32(REG::ROTATE, 1);
   #endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
index e1439a75c6..471530cadf 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h
@@ -124,5 +124,5 @@
   }
 
 #else
-  #error Unknown or no TOUCH_UI_FTDI_EVE display resolution specified. To add a display resolution, modify "ftdi_eve_resolutions.h"
+  #error "Unknown or no TOUCH_UI_FTDI_EVE display resolution specified. To add a display resolution, modify 'ftdi_eve_resolutions.h'."
 #endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h
index 0ef9779c71..ef2b23a3a2 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h
@@ -210,7 +210,9 @@
   #define ENABLED(b)         _CAT(SWITCH_ENABLED_, b)
   #define DISABLED(b)        !ENABLED(b)
   #define ANY(A,B)           (ENABLED(A) || ENABLED(B))
+  #define EITHER(A,B)        (ENABLED(A) || ENABLED(B))
   #define BOTH(A,B)          (ENABLED(A) && ENABLED(B))
+  #define NONE(A,B)          (DISABLED(A) && DISABLED(B))
 
   // Remove compiler warning on an unused variable
   #ifndef UNUSED
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/pin_mappings.h b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/pin_mappings.h
index c2818570f1..d474644b8c 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/pin_mappings.h
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/pin_mappings.h
@@ -29,7 +29,7 @@
 
 #ifdef CR10_TFT_PINMAP
   #ifndef __MARLIN_FIRMWARE__
-    #error This pin mapping requires Marlin.
+    #error "This pin mapping requires Marlin."
   #endif
 
   #define CLCD_USE_SOFT_SPI
@@ -49,7 +49,7 @@
 
 #ifdef AO_EXP1_DEPRECATED_PINMAP
   #ifndef __MARLIN_FIRMWARE__
-    #error This pin mapping requires Marlin.
+    #error "This pin mapping requires Marlin."
   #endif
 
   #define CLCD_MOD_RESET                 LCD_PINS_D4
@@ -89,7 +89,7 @@
 
 #ifdef AO_EXP1_PINMAP
   #ifndef __MARLIN_FIRMWARE__
-    #error This pin mapping requires Marlin.
+    #error "This pin mapping requires Marlin."
   #endif
 
   #define CLCD_MOD_RESET                 LCD_PINS_ENABLE
@@ -134,7 +134,7 @@
 
 #ifdef AO_EXP2_PINMAP
   #ifndef __MARLIN_FIRMWARE__
-    #error This pin mapping requires Marlin.
+    #error "This pin mapping requires Marlin."
   #endif
 
   #define CLCD_SPI_CS                    BTN_EN1
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp
index 58a545937c..016996e265 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/main_menu.cpp
@@ -55,7 +55,7 @@ void MainMenu::onRedraw(draw_mode_t what) {
         .tag(5).button( BTN_POS(2,2), BTN_SIZE(1,1), GET_TEXT_F(MSG_DISABLE_STEPPERS))
         .tag(6).button( BTN_POS(1,3), BTN_SIZE(2,1), GET_TEXT_F(MSG_TEMPERATURE))
         .enabled(
-          #if DISABLED(TOUCH_UI_LULZBOT_BIO) && DISABLED(TOUCH_UI_COCOA_PRESS)
+          #if NONE(TOUCH_UI_LULZBOT_BIO, TOUCH_UI_COCOA_PRESS)
             1
           #endif
         )
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/screens.h b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/screens.h
index 4e6d8d3e2d..176c8145e3 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/screens.h
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/screens.h
@@ -232,7 +232,7 @@ class SpinnerDialogBox : public DialogBoxBaseClass, public CachedScreen<SPINNER_
     static void enqueueAndWait_P(const progmem_str message, const progmem_str commands);
 };
 
-#if DISABLED(TOUCH_UI_LULZBOT_BIO) && DISABLED(TOUCH_UI_COCOA_PRESS)
+#if NONE(TOUCH_UI_LULZBOT_BIO, TOUCH_UI_COCOA_PRESS)
 class StatusScreen : public BaseScreen, public CachedScreen<STATUS_SCREEN_CACHE,STATUS_SCREEN_DL_SIZE> {
   private:
     static void draw_axis_position(draw_mode_t);
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
index bc2cce2ff6..e71f200a35 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/status_screen.cpp
@@ -22,7 +22,7 @@
 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && DISABLED(TOUCH_UI_LULZBOT_BIO) && DISABLED(TOUCH_UI_COCOA_PRESS)
+#if ENABLED(TOUCH_UI_FTDI_EVE) && NONE(TOUCH_UI_LULZBOT_BIO, TOUCH_UI_COCOA_PRESS)
 
 #include "screens.h"
 #include "screen_data.h"
diff --git a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/theme/colors.h b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/theme/colors.h
index 95494bbae8..933e91db80 100644
--- a/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/theme/colors.h
+++ b/Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/theme/colors.h
@@ -75,7 +75,7 @@ namespace Theme {
   constexpr uint32_t gray_color_5       = hsl_to_rgb(accent_hue, gray_sat, 0.78);
   constexpr uint32_t gray_color_6       = hsl_to_rgb(accent_hue, gray_sat, 0.91); // Lightest
 
-  #if DISABLED(TOUCH_UI_LULZBOT_BIO) && DISABLED(TOUCH_UI_COCOA_PRESS)
+  #if NONE(TOUCH_UI_LULZBOT_BIO, TOUCH_UI_COCOA_PRESS)
     // Lulzbot TAZ Pro
     constexpr uint32_t theme_darkest    = gray_color_1;
     constexpr uint32_t theme_dark       = gray_color_2;
diff --git a/Marlin/src/lcd/extui_dgus_lcd.cpp b/Marlin/src/lcd/extui_dgus_lcd.cpp
index c2daacd70a..0da82472b4 100644
--- a/Marlin/src/lcd/extui_dgus_lcd.cpp
+++ b/Marlin/src/lcd/extui_dgus_lcd.cpp
@@ -34,6 +34,8 @@
 #include "extensible_ui/lib/dgus/DGUSDisplay.h"
 #include "extensible_ui/lib/dgus/DGUSDisplayDefinition.h"
 
+extern const char NUL_STR[];
+
 namespace ExtUI {
 
   void onStartup() {
@@ -44,15 +46,26 @@ namespace ExtUI {
   void onIdle() { ScreenHandler.loop(); }
 
   void onPrinterKilled(PGM_P error, PGM_P component) {
-    extern const char NUL_STR[];
     ScreenHandler.sendinfoscreen(GET_TEXT(MSG_HALTED), error, NUL_STR, GET_TEXT(MSG_PLEASE_RESET), true, true, true, true);
     ScreenHandler.GotoScreen(DGUSLCD_SCREEN_KILL);
     while (!ScreenHandler.loop());  // Wait while anything is left to be sent
   }
 
-  void onMediaInserted() { ScreenHandler.SDCardInserted(); }
-  void onMediaError()    { ScreenHandler.SDCardError(); }
-  void onMediaRemoved()  { ScreenHandler.SDCardRemoved(); }
+  void onMediaInserted() {
+    #if ENABLED(SDSUPPORT)
+      ScreenHandler.SDCardInserted();
+    #endif
+  }
+  void onMediaError()    {
+    #if ENABLED(SDSUPPORT)
+      ScreenHandler.SDCardError();
+    #endif
+  }
+  void onMediaRemoved()  {
+    #if ENABLED(SDSUPPORT)
+      ScreenHandler.SDCardRemoved();
+    #endif
+  }
 
   void onPlayTone(const uint16_t frequency, const uint16_t duration) {}
   void onPrintTimerStarted() {}
diff --git a/Marlin/src/lcd/extui_example.cpp b/Marlin/src/lcd/extui_example.cpp
index 9a00db5f80..595b45e31b 100644
--- a/Marlin/src/lcd/extui_example.cpp
+++ b/Marlin/src/lcd/extui_example.cpp
@@ -60,7 +60,7 @@ namespace ExtUI {
   void onFactoryReset() {}
 
   void onStoreSettings(char *buff) {
-    // This is called when saving to EEPROM (i.e. M500). If the ExtUI needs
+    // Called when saving to EEPROM (i.e. M500). If the ExtUI needs
     // permanent data to be stored, it can write up to eeprom_data_size bytes
     // into buff.
 
@@ -70,7 +70,7 @@ namespace ExtUI {
   }
 
   void onLoadSettings(const char *buff) {
-    // This is called while loading settings from EEPROM. If the ExtUI
+    // Called while loading settings from EEPROM. If the ExtUI
     // needs to retrieve data, it should copy up to eeprom_data_size bytes
     // from buff
 
@@ -80,17 +80,17 @@ namespace ExtUI {
   }
 
   void onConfigurationStoreWritten(bool success) {
-    // This is called after the entire EEPROM has been written,
+    // Called after the entire EEPROM has been written,
     // whether successful or not.
   }
 
   void onConfigurationStoreRead(bool success) {
-    // This is called after the entire EEPROM has been read,
+    // Called after the entire EEPROM has been read,
     // whether successful or not.
   }
 
   void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
-    // This is called when any mesh points are updated
+    // Called when any mesh points are updated
   }
 }
 
diff --git a/config/examples/FlashForge/CreatorPro/CuraSettings.txt b/config/examples/FlashForge/CreatorPro/CuraSettings.txt
index 8f74d83a99..d45af2b721 100644
--- a/config/examples/FlashForge/CreatorPro/CuraSettings.txt
+++ b/config/examples/FlashForge/CreatorPro/CuraSettings.txt
@@ -117,7 +117,7 @@ Extruder 2 -
 
 ;START G-CODE;
 M104 T0 S{material_print_temperature, 0}
-M104 T1 S{material_print_temperature , 1}
+M104 T1 S{material_print_temperature, 1}
 M140 S{material_bed_temperature}
 G28
 ;purge right
@@ -136,9 +136,9 @@ G92 E0
 ;purge left
 T1
 ;M104 T0 S{material_standby_temperature, 0}
-M104 T1 S{material_print_temperature ,1}
+M104 T1 S{material_print_temperature, 1}
 G1 X-110 Y-70 Z30 F4800
-M109 T1 S{material_print_temperature , 1}
+M109 T1 S{material_print_temperature, 1}
 G92 E0
 G1 Z0.4 F1800
 G1 X-67 Y-70 E25 F300 ; purge nozzle