Merge pull request #9312 from thinkyhead/bf2_fade_info_too

[2.0.x] Include Z Fade in log_machine_info

Marlin/src/core/utility.cpp

@@ -335,6 +335,10 @@ void safe_delay(millis_t ms) {
       #endif
       if (planner.leveling_active) {
         SERIAL_ECHOLNPGM(" (enabled)");
+        #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
+          if (planner.z_fade_height)
+            SERIAL_ECHOLNPAIR("Z Fade: ", planner.z_fade_height);
+        #endif
         #if ABL_PLANAR
           const float diff[XYZ] = {
             stepper.get_axis_position_mm(X_AXIS) - current_position[X_AXIS],
@@ -350,10 +354,21 @@ void safe_delay(millis_t ms) {
           SERIAL_ECHOPGM(" Z");
           if (diff[Z_AXIS] > 0) SERIAL_CHAR('+');
           SERIAL_ECHO(diff[Z_AXIS]);
-        #elif ENABLED(AUTO_BED_LEVELING_UBL)
+        #else
-          SERIAL_ECHOPAIR("UBL Adjustment Z", stepper.get_axis_position_mm(Z_AXIS) - current_position[Z_AXIS]);
+          #if ENABLED(AUTO_BED_LEVELING_UBL)
+            SERIAL_ECHOPGM("UBL Adjustment Z");
+            const float rz = ubl.get_z_correction(current_position[X_AXIS], current_position[Y_AXIS]);
           #elif ENABLED(AUTO_BED_LEVELING_BILINEAR)
-          SERIAL_ECHOPAIR("ABL Adjustment Z", bilinear_z_offset(current_position));
+            SERIAL_ECHOPGM("ABL Adjustment Z");
+            const float rz = bilinear_z_offset(current_position);
+          #endif
+          SERIAL_ECHO(ftostr43sign(rz, '+'));
+          #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
+            if (planner.z_fade_height) {
+              SERIAL_ECHOPAIR(" (", ftostr43sign(rz * planner.fade_scaling_factor_for_z(current_position[Z_AXIS]), '+'));
+              SERIAL_CHAR(')');
+            }
+          #endif
         #endif
       }
       else
@@ -365,10 +380,16 @@ void safe_delay(millis_t ms) {
 
       SERIAL_ECHOPGM("Mesh Bed Leveling");
       if (planner.leveling_active) {
-        float rz = current_position[Z_AXIS];
-        planner.apply_leveling(current_position[X_AXIS], current_position[Y_AXIS], rz);
         SERIAL_ECHOLNPGM(" (enabled)");
-        SERIAL_ECHOPAIR("MBL Adjustment Z", rz);
+        SERIAL_ECHOPAIR("MBL Adjustment Z", ftostr43sign(mbl.get_z(current_position[X_AXIS], current_position[Y_AXIS], 1.0), '+'));
+        #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
+          if (planner.z_fade_height) {
+            SERIAL_ECHOPAIR(" (", ftostr43sign(
+              mbl.get_z(current_position[X_AXIS], current_position[Y_AXIS], planner.fade_scaling_factor_for_z(current_position[Z_AXIS])), '+'
+            ));
+            SERIAL_CHAR(')');
+          }
+        #endif
       }
       else
         SERIAL_ECHOPGM(" (disabled)");

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -132,32 +132,40 @@
  */
 void GcodeSuite::G29() {
 
+  #if ENABLED(DEBUG_LEVELING_FEATURE) || ENABLED(PROBE_MANUALLY)
+    const bool seenQ = parser.seen('Q');
+  #else
+    constexpr bool seenQ = false;
+  #endif
+
   // G29 Q is also available if debugging
   #if ENABLED(DEBUG_LEVELING_FEATURE)
-    const bool query = parser.seen('Q');
     const uint8_t old_debug_flags = marlin_debug_flags;
-    if (query) marlin_debug_flags |= DEBUG_LEVELING;
+    if (seenQ) marlin_debug_flags |= DEBUG_LEVELING;
     if (DEBUGGING(LEVELING)) {
       DEBUG_POS(">>> G29", current_position);
       log_machine_info();
     }
     marlin_debug_flags = old_debug_flags;
     #if DISABLED(PROBE_MANUALLY)
-      if (query) return;
+      if (seenQ) return;
     #endif
   #endif
 
   #if ENABLED(PROBE_MANUALLY)
-    const bool seenA = parser.seen('A'), seenQ = parser.seen('Q'), no_action = seenA || seenQ;
+    const bool seenA = parser.seen('A');
+  #else
+    constexpr bool seenA = false;
   #endif
 
+  const bool  no_action = seenA || seenQ,
+              faux =
                 #if ENABLED(DEBUG_LEVELING_FEATURE) && DISABLED(PROBE_MANUALLY)
-    const bool faux = parser.boolval('C');
+                  parser.boolval('C')
-  #elif ENABLED(PROBE_MANUALLY)
-    const bool faux = no_action;
                 #else
-    bool constexpr faux = false;
+                  no_action
                 #endif
+              ;
 
   // Don't allow auto-leveling without homing first
   if (axis_unhomed_error()) return;
@@ -388,7 +396,7 @@ void GcodeSuite::G29() {
 
     // Disable auto bed leveling during G29.
     // Be formal so G29 can be done successively without G28.
-    set_bed_leveling_enabled(false);
+    if (!no_action) set_bed_leveling_enabled(false);
 
     #if HAS_BED_PROBE
       // Deploy the probe. Probe will raise if needed.

Marlin/src/module/stepper_indirection.cpp

@@ -258,7 +258,7 @@
 
   #define _TMC2208_DEFINE_HARDWARE(ST) TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL)
   #define _TMC2208_DEFINE_SOFTWARE(ST) SoftwareSerial ST##_HARDWARE_SERIAL = SoftwareSerial(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN); \
-                                       TMC2208Stepper stepper##ST(&stepper##ST##_serial, ST##_SERIAL_RX_PIN > -1)
+                                       TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL, ST##_SERIAL_RX_PIN > -1)
 
   // Stepper objects of TMC2208 steppers used
   #if ENABLED(X_IS_TMC2208)