Simplified fan handling code

Marlin/src/HAL/HAL_AVR/fastio_AVR.h

@@ -287,11 +287,11 @@ enum ClockSource2 : char {
 
 #if ANY_PIN(FAN, FAN1, FAN2)
   #if PIN_EXISTS(FAN2)
-    #define PWM_CHK_FAN_A(P) (P == FAN_PIN || P == FAN1_PIN || P == FAN2_PIN)
+    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN)
   #elif PIN_EXISTS(FAN1)
-    #define PWM_CHK_FAN_A(P) (P == FAN_PIN || P == FAN1_PIN)
+    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN)
   #else
-    #define PWM_CHK_FAN_A(P) (P == FAN_PIN)
+    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN)
   #endif
 #else
   #define PWM_CHK_FAN_A(P) false

Marlin/src/gcode/control/M42.cpp

@@ -56,7 +56,7 @@ void GcodeSuite::M42() {
   #if FAN_COUNT > 0
     switch (pin) {
       #if HAS_FAN0
-        case FAN_PIN: thermalManager.fan_speed[0] = pin_status; break;
+        case FAN0_PIN: thermalManager.fan_speed[0] = pin_status; break;
       #endif
       #if HAS_FAN1
         case FAN1_PIN: thermalManager.fan_speed[1] = pin_status; break;

Marlin/src/inc/Conditionals_post.h

@@ -1193,17 +1193,9 @@
   #define FAN_COUNT 0
 #endif
 
-#if HAS_FAN0
-  #define WRITE_FAN(v) WRITE(FAN_PIN, (v) ^ FAN_INVERTING)
-  #define WRITE_FAN0(v) WRITE_FAN(v)
+#if FAN_COUNT > 0
+  #define WRITE_FAN(n, v) WRITE(FAN##n##_PIN, (v) ^ FAN_INVERTING)
 #endif
-#if HAS_FAN1
-  #define WRITE_FAN1(v) WRITE(FAN1_PIN, (v) ^ FAN_INVERTING)
-#endif
-#if HAS_FAN2
-  #define WRITE_FAN2(v) WRITE(FAN2_PIN, (v) ^ FAN_INVERTING)
-#endif
-#define WRITE_FAN_N(n, v) WRITE_FAN##n(v)
 
 /**
  * Part Cooling fan multipliexer

Marlin/src/module/planner.cpp

@@ -1169,8 +1169,11 @@ void Planner::recalculate() {
  * Maintain fans, paste extruder pressure,
  */
 void Planner::check_axes_activity() {
-  uint8_t axis_active[NUM_AXIS] = { 0 },
-          tail_fan_speed[FAN_COUNT];
+  uint8_t axis_active[NUM_AXIS] = { 0 };
+
+  #if FAN_COUNT > 0
+    uint8_t tail_fan_speed[FAN_COUNT];
+  #endif
 
   #if ENABLED(BARICUDA)
     #if HAS_HEATER_1
@@ -1182,15 +1185,18 @@ void Planner::check_axes_activity() {
   #endif
 
   if (has_blocks_queued()) {
-    #if FAN_COUNT > 0
-      FANS_LOOP(i)
-        tail_fan_speed[i] = thermalManager.scaledFanSpeed(i, block_buffer[block_buffer_tail].fan_speed[i]);
-    #endif
-
     block_t* block;
 
-    #if ENABLED(BARICUDA)
+    #if FAN_COUNT > 0 || ENABLED(BARICUDA)
       block = &block_buffer[block_buffer_tail];
+    #endif
+
+    #if FAN_COUNT > 0
+      FANS_LOOP(i)
+        tail_fan_speed[i] = thermalManager.scaledFanSpeed(i, block->fan_speed[i]);
+    #endif
+
+    #if ENABLED(BARICUDA)
       #if HAS_HEATER_1
         tail_valve_pressure = block->valve_pressure;
       #endif
@@ -1236,9 +1242,7 @@ void Planner::check_axes_activity() {
   #if FAN_COUNT > 0
 
     #if FAN_KICKSTART_TIME > 0
-
       static millis_t fan_kick_end[FAN_COUNT] = { 0 };
-
       #define KICKSTART_FAN(f)                         \
         if (tail_fan_speed[f]) {                       \
           millis_t ms = millis();                      \
@@ -1248,18 +1252,9 @@ void Planner::check_axes_activity() {
           } else if (PENDING(ms, fan_kick_end[f]))     \
             tail_fan_speed[f] = 255;                   \
         } else fan_kick_end[f] = 0
-
-      #if HAS_FAN0
-        KICKSTART_FAN(0);
+    #else
+      #define KICKSTART_FAN(f) NOOP
     #endif
-      #if HAS_FAN1
-        KICKSTART_FAN(1);
-      #endif
-      #if HAS_FAN2
-        KICKSTART_FAN(2);
-      #endif
-
-    #endif // FAN_KICKSTART_TIME > 0
 
     #if FAN_MIN_PWM != 0 || FAN_MAX_PWM != 255
       #define CALC_FAN_SPEED(f) (tail_fan_speed[f] ? map(tail_fan_speed[f], 1, 255, FAN_MIN_PWM, FAN_MAX_PWM) : 0)
@@ -1268,43 +1263,24 @@ void Planner::check_axes_activity() {
     #endif
 
     #if ENABLED(FAN_SOFT_PWM)
-
-      #if HAS_FAN0
-        thermalManager.soft_pwm_amount_fan[0] = CALC_FAN_SPEED(0);
-      #endif
-      #if HAS_FAN1
-        thermalManager.soft_pwm_amount_fan[1] = CALC_FAN_SPEED(1);
-      #endif
-      #if HAS_FAN2
-        thermalManager.soft_pwm_amount_fan[2] = CALC_FAN_SPEED(2);
-      #endif
-
+      #define _FAN_SET(F) thermalManager.soft_pwm_amount_fan[F] = CALC_FAN_SPEED(F);
     #elif ENABLED(FAST_PWM_FAN)
+      #define _FAN_SET(F) set_pwm_duty(FAN##F##_PIN, CALC_FAN_SPEED(F));
+    #else
+      #define _FAN_SET(F) analogWrite(pin_t(FAN##F##_PIN), CALC_FAN_SPEED(F));
+    #endif
+    #define FAN_SET(F) do{ KICKSTART_FAN(F); _FAN_SET(F); }while(0)
 
     #if HAS_FAN0
-        set_pwm_duty(FAN_PIN, CALC_FAN_SPEED(0));
+      FAN_SET(0);
     #endif
     #if HAS_FAN1
-        set_pwm_duty(FAN1_PIN, CALC_FAN_SPEED(1));
+      FAN_SET(1);
     #endif
     #if HAS_FAN2
-        set_pwm_duty(FAN2_PIN, CALC_FAN_SPEED(2));
+      FAN_SET(2);
     #endif
 
-    #else
-
-      #if HAS_FAN0
-        analogWrite(pin_t(FAN_PIN), CALC_FAN_SPEED(0));
-      #endif
-      #if HAS_FAN1
-        analogWrite(pin_t(FAN1_PIN), CALC_FAN_SPEED(1));
-      #endif
-      #if HAS_FAN2
-        analogWrite(pin_t(FAN2_PIN), CALC_FAN_SPEED(2));
-      #endif
-    #endif
-  #else
-    UNUSED(tail_fan_speed);
   #endif // FAN_COUNT > 0
 
   #if ENABLED(AUTOTEMP)

Marlin/src/module/temperature.cpp

@@ -2392,8 +2392,9 @@ void Temperature::isr() {
 
       #if ENABLED(FAN_SOFT_PWM)
         #define _FAN_PWM(N) do{ \
-          soft_pwm_count_fan[N] = (soft_pwm_count_fan[N] & pwm_mask) + (soft_pwm_amount_fan[N] >> 1); \
-          WRITE_FAN_N(N, soft_pwm_count_fan[N] > pwm_mask ? HIGH : LOW); \
+          uint8_t &spcf = soft_pwm_count_fan[N]; \
+          spcf = (spcf & pwm_mask) + (soft_pwm_amount_fan[N] >> 1); \
+          WRITE_FAN(N, spcf > pwm_mask ? HIGH : LOW); \
         }while(0)
         #if HAS_FAN0
           _FAN_PWM(0);
@@ -2438,13 +2439,13 @@ void Temperature::isr() {
 
       #if ENABLED(FAN_SOFT_PWM)
         #if HAS_FAN0
-          if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(LOW);
+          if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0, LOW);
         #endif
         #if HAS_FAN1
-          if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN1(LOW);
+          if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN(1, LOW);
         #endif
         #if HAS_FAN2
-          if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN2(LOW);
+          if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN(2, LOW);
         #endif
       #endif
     }
@@ -2525,28 +2526,28 @@ void Temperature::isr() {
     #if ENABLED(FAN_SOFT_PWM)
       if (pwm_count_tmp >= 127) {
         pwm_count_tmp = 0;
-        #define _PWM_FAN(N,I) do{                               \
-          soft_pwm_count_fan[I] = soft_pwm_amount_fan[I] >> 1;  \
-          WRITE_FAN##N(soft_pwm_count_fan[I] > 0 ? HIGH : LOW); \
+        #define _PWM_FAN(N) do{                                 \
+          soft_pwm_count_fan[N] = soft_pwm_amount_fan[N] >> 1;  \
+          WRITE_FAN(N, soft_pwm_count_fan[N] > 0 ? HIGH : LOW); \
         }while(0)
         #if HAS_FAN0
-          _PWM_FAN(,0);
+          _PWM_FAN(0);
         #endif
         #if HAS_FAN1
-          _PWM_FAN(1,1);
+          _PWM_FAN(1);
         #endif
         #if HAS_FAN2
-          _PWM_FAN(2,2);
+          _PWM_FAN(2);
         #endif
       }
       #if HAS_FAN0
-        if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(LOW);
+        if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0, LOW);
       #endif
       #if HAS_FAN1
-        if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN1(LOW);
+        if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN(1, LOW);
       #endif
       #if HAS_FAN2
-        if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN2(LOW);
+        if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN(2, LOW);
       #endif
     #endif // FAN_SOFT_PWM
 

Marlin/src/pins/pins.h

@@ -660,6 +660,7 @@
 #ifndef FAN_PIN
   #define FAN_PIN -1
 #endif
+#define FAN0_PIN FAN_PIN
 #ifndef FAN1_PIN
   #define FAN1_PIN -1
 #endif