diff --git a/Marlin/src/gcode/control/M350_M351.cpp b/Marlin/src/gcode/control/M350_M351.cpp index cd75e7b2b1..a83823f315 100644 --- a/Marlin/src/gcode/control/M350_M351.cpp +++ b/Marlin/src/gcode/control/M350_M351.cpp @@ -41,17 +41,21 @@ void GcodeSuite::M350() { /** * M351: Toggle MS1 MS2 pins directly with axis codes X Y Z E B - * S# determines MS1 or MS2, X# sets the pin high/low. + * S# determines MS1, MS2 or MS3, X# sets the pin high/low. */ void GcodeSuite::M351() { if (parser.seenval('S')) switch (parser.value_byte()) { case 1: - LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, parser.value_byte(), -1); - if (parser.seenval('B')) stepper.microstep_ms(4, parser.value_byte(), -1); + LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, parser.value_byte(), -1, -1); + if (parser.seenval('B')) stepper.microstep_ms(4, parser.value_byte(), -1, -1); break; case 2: - LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, parser.value_byte()); - if (parser.seenval('B')) stepper.microstep_ms(4, -1, parser.value_byte()); + LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, parser.value_byte(), -1); + if (parser.seenval('B')) stepper.microstep_ms(4, -1, parser.value_byte(), -1); + break; + case 3: + LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) stepper.microstep_ms(i, -1, -1, parser.value_byte()); + if (parser.seenval('B')) stepper.microstep_ms(4, -1, -1, parser.value_byte()); break; } stepper.microstep_readings(); diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 326a701af5..969a7021c0 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -236,26 +236,37 @@ #define MAX_AUTORETRACT 99 #endif -// MS1 MS2 Stepper Driver Microstepping mode table -#define MICROSTEP1 LOW,LOW -#if ENABLED(HEROIC_STEPPER_DRIVERS) - #define MICROSTEP128 LOW,HIGH -#else - #define MICROSTEP2 HIGH,LOW - #define MICROSTEP4 LOW,HIGH -#endif -#define MICROSTEP8 HIGH,HIGH -#ifdef __SAM3X8E__ - #if MB(ALLIGATOR) - #define MICROSTEP16 LOW,LOW - #define MICROSTEP32 HIGH,HIGH +// MS1 MS2 MS3 Stepper Driver Microstepping mode table +#if DISABLED(MICROSTEP_CUSTOM) + #define MICROSTEP1 LOW,LOW,LOW + #if ENABLED(HEROIC_STEPPER_DRIVERS) + #define MICROSTEP128 LOW,HIGH,LOW #else - #define MICROSTEP16 HIGH,HIGH + #define MICROSTEP2 HIGH,LOW,LOW + #define MICROSTEP4 LOW,HIGH,LOW + #endif + #define MICROSTEP8 HIGH,HIGH,LOW + #ifdef __SAM3X8E__ + #if MB(ALLIGATOR) + #define MICROSTEP16 LOW,LOW,LOW + #define MICROSTEP32 HIGH,HIGH,LOW + #else + #define MICROSTEP16 HIGH,HIGH,LOW + #endif + #else + #define MICROSTEP16 HIGH,HIGH,LOW #endif -#else - #define MICROSTEP16 HIGH,HIGH #endif +#define HAS_MICROSTEP1 defined(MICROSTEP1) +#define HAS_MICROSTEP2 defined(MICROSTEP2) +#define HAS_MICROSTEP4 defined(MICROSTEP4) +#define HAS_MICROSTEP8 defined(MICROSTEP8) +#define HAS_MICROSTEP16 defined(MICROSTEP16) +#define HAS_MICROSTEP32 defined(MICROSTEP32) +#define HAS_MICROSTEP64 defined(MICROSTEP64) +#define HAS_MICROSTEP128 defined(MICROSTEP128) + /** * Override here because this is set in Configuration_adv.h */ @@ -828,6 +839,7 @@ #define HAS_Z3_ENABLE (PIN_EXISTS(Z3_ENABLE)) #define HAS_Z3_DIR (PIN_EXISTS(Z3_DIR)) #define HAS_Z3_STEP (PIN_EXISTS(Z3_STEP)) +#define HAS_Z3_MICROSTEPS (PIN_EXISTS(Z3_MS1)) // Extruder steppers and solenoids #define HAS_E0_ENABLE (PIN_EXISTS(E0_ENABLE)) @@ -1003,7 +1015,7 @@ #define HAS_CASE_LIGHT (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE)) // Digital control -#define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Z_MICROSTEPS || HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS) +#define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS || HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS || HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS || HAS_E5_MICROSTEPS) #define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET)) #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) #define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E)) diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp index ed7ef07931..d3ce5b70a0 100644 --- a/Marlin/src/module/stepper.cpp +++ b/Marlin/src/module/stepper.cpp @@ -2504,53 +2504,136 @@ void Stepper::report_positions() { */ void Stepper::microstep_init() { - SET_OUTPUT(X_MS1_PIN); - SET_OUTPUT(X_MS2_PIN); + #if HAS_X_MICROSTEPS + SET_OUTPUT(X_MS1_PIN); + SET_OUTPUT(X_MS2_PIN); + #if PIN_EXISTS(X_MS3) + SET_OUTPUT(X_MS3_PIN); + #endif + #endif + #if HAS_X2_MICROSTEPS + SET_OUTPUT(X2_MS1_PIN); + SET_OUTPUT(X2_MS2_PIN); + #if PIN_EXISTS(X2_MS3) + SET_OUTPUT(X2_MS3_PIN); + #endif + #endif #if HAS_Y_MICROSTEPS SET_OUTPUT(Y_MS1_PIN); SET_OUTPUT(Y_MS2_PIN); + #if PIN_EXISTS(Y_MS3) + SET_OUTPUT(Y_MS3_PIN); + #endif + #endif + #if HAS_Y2_MICROSTEPS + SET_OUTPUT(Y2_MS1_PIN); + SET_OUTPUT(Y2_MS2_PIN); + #if PIN_EXISTS(Y2_MS3) + SET_OUTPUT(Y2_MS3_PIN); + #endif #endif #if HAS_Z_MICROSTEPS SET_OUTPUT(Z_MS1_PIN); SET_OUTPUT(Z_MS2_PIN); + #if PIN_EXISTS(Z_MS3) + SET_OUTPUT(Z_MS3_PIN); + #endif #endif + #if HAS_Z2_MICROSTEPS + SET_OUTPUT(Z2_MS1_PIN); + SET_OUTPUT(Z2_MS2_PIN); + #if PIN_EXISTS(Z2_MS3) + SET_OUTPUT(Z2_MS3_PIN); + #endif + #endif + #if HAS_Z3_MICROSTEPS + SET_OUTPUT(Z3_MS1_PIN); + SET_OUTPUT(Z3_MS2_PIN); + #if PIN_EXISTS(Z3_MS3) + SET_OUTPUT(Z3_MS3_PIN); + #endif + #endif #if HAS_E0_MICROSTEPS SET_OUTPUT(E0_MS1_PIN); SET_OUTPUT(E0_MS2_PIN); + #if PIN_EXISTS(E0_MS3) + SET_OUTPUT(E0_MS3_PIN); + #endif #endif #if HAS_E1_MICROSTEPS SET_OUTPUT(E1_MS1_PIN); SET_OUTPUT(E1_MS2_PIN); + #if PIN_EXISTS(E1_MS3) + SET_OUTPUT(E1_MS3_PIN); + #endif #endif #if HAS_E2_MICROSTEPS SET_OUTPUT(E2_MS1_PIN); SET_OUTPUT(E2_MS2_PIN); + #if PIN_EXISTS(E2_MS3) + SET_OUTPUT(E2_MS3_PIN); + #endif #endif #if HAS_E3_MICROSTEPS SET_OUTPUT(E3_MS1_PIN); SET_OUTPUT(E3_MS2_PIN); + #if PIN_EXISTS(E3_MS3) + SET_OUTPUT(E3_MS3_PIN); + #endif #endif #if HAS_E4_MICROSTEPS SET_OUTPUT(E4_MS1_PIN); SET_OUTPUT(E4_MS2_PIN); + #if PIN_EXISTS(E4_MS3) + SET_OUTPUT(E4_MS3_PIN); + #endif #endif #if HAS_E5_MICROSTEPS SET_OUTPUT(E5_MS1_PIN); SET_OUTPUT(E5_MS2_PIN); + #if PIN_EXISTS(E5_MS3) + SET_OUTPUT(E5_MS3_PIN); + #endif #endif static const uint8_t microstep_modes[] = MICROSTEP_MODES; for (uint16_t i = 0; i < COUNT(microstep_modes); i++) microstep_mode(i, microstep_modes[i]); } - void Stepper::microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2) { + void Stepper::microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2, const int8_t ms3) { if (ms1 >= 0) switch (driver) { - case 0: WRITE(X_MS1_PIN, ms1); break; - #if HAS_Y_MICROSTEPS - case 1: WRITE(Y_MS1_PIN, ms1); break; + #if HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS + case 0: + #if HAS_X_MICROSTEPS + WRITE(X_MS1_PIN, ms1); + #endif + #if HAS_X2_MICROSTEPS + WRITE(X2_MS1_PIN, ms1); + #endif + break; #endif - #if HAS_Z_MICROSTEPS - case 2: WRITE(Z_MS1_PIN, ms1); break; + #if HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS + case 1: + #if HAS_Y_MICROSTEPS + WRITE(Y_MS1_PIN, ms1); + #endif + #if HAS_Y2_MICROSTEPS + WRITE(Y2_MS1_PIN, ms1); + #endif + break; + #endif + #if HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS + case 2: + #if HAS_Z_MICROSTEPS + WRITE(Z_MS1_PIN, ms1); + #endif + #if HAS_Z2_MICROSTEPS + WRITE(Z2_MS1_PIN, ms1); + #endif + #if HAS_Z3_MICROSTEPS + WRITE(Z3_MS1_PIN, ms1); + #endif + break; #endif #if HAS_E0_MICROSTEPS case 3: WRITE(E0_MS1_PIN, ms1); break; @@ -2572,12 +2655,38 @@ void Stepper::report_positions() { #endif } if (ms2 >= 0) switch (driver) { - case 0: WRITE(X_MS2_PIN, ms2); break; - #if HAS_Y_MICROSTEPS - case 1: WRITE(Y_MS2_PIN, ms2); break; + #if HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS + case 0: + #if HAS_X_MICROSTEPS + WRITE(X_MS2_PIN, ms2); + #endif + #if HAS_X2_MICROSTEPS + WRITE(X2_MS2_PIN, ms2); + #endif + break; #endif - #if HAS_Z_MICROSTEPS - case 2: WRITE(Z_MS2_PIN, ms2); break; + #if HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS + case 1: + #if HAS_Y_MICROSTEPS + WRITE(Y_MS2_PIN, ms2); + #endif + #if HAS_Y2_MICROSTEPS + WRITE(Y2_MS2_PIN, ms2); + #endif + break; + #endif + #if HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS + case 2: + #if HAS_Z_MICROSTEPS + WRITE(Z_MS2_PIN, ms2); + #endif + #if HAS_Z2_MICROSTEPS + WRITE(Z2_MS2_PIN, ms2); + #endif + #if HAS_Z3_MICROSTEPS + WRITE(Z3_MS2_PIN, ms2); + #endif + break; #endif #if HAS_E0_MICROSTEPS case 3: WRITE(E0_MS2_PIN, ms2); break; @@ -2598,70 +2707,165 @@ void Stepper::report_positions() { case 8: WRITE(E5_MS2_PIN, ms2); break; #endif } + if (ms3 >= 0) switch (driver) { + #if HAS_X_MICROSTEPS || HAS_X2_MICROSTEPS + case 0: + #if HAS_X_MICROSTEPS && PIN_EXISTS(X_MS3) + WRITE(X_MS3_PIN, ms3); + #endif + #if HAS_X2_MICROSTEPS && PIN_EXISTS(X2_MS3) + WRITE(X2_MS3_PIN, ms3); + #endif + break; + #endif + #if HAS_Y_MICROSTEPS || HAS_Y2_MICROSTEPS + case 1: + #if HAS_Y_MICROSTEPS && PIN_EXISTS(Y_MS3) + WRITE(Y_MS3_PIN, ms3); + #endif + #if HAS_Y2_MICROSTEPS && PIN_EXISTS(Y2_MS3) + WRITE(Y2_MS3_PIN, ms3); + #endif + break; + #endif + #if HAS_Z_MICROSTEPS || HAS_Z2_MICROSTEPS || HAS_Z3_MICROSTEPS + case 2: + #if HAS_Z_MICROSTEPS && PIN_EXISTS(Z_MS3) + WRITE(Z_MS3_PIN, ms3); + #endif + #if HAS_Z2_MICROSTEPS && PIN_EXISTS(Z2_MS3) + WRITE(Z2_MS3_PIN, ms3); + #endif + #if HAS_Z3_MICROSTEPS && PIN_EXISTS(Z3_MS3) + WRITE(Z3_MS3_PIN, ms3); + #endif + break; + #endif + #if HAS_E0_MICROSTEPS && PIN_EXISTS(E0_MS3) + case 3: WRITE(E0_MS3_PIN, ms3); break; + #endif + #if HAS_E1_MICROSTEPS && PIN_EXISTS(E1_MS3) + case 4: WRITE(E1_MS3_PIN, ms3); break; + #endif + #if HAS_E2_MICROSTEPS && PIN_EXISTS(E2_MS3) + case 5: WRITE(E2_MS3_PIN, ms3); break; + #endif + #if HAS_E3_MICROSTEPS && PIN_EXISTS(E3_MS3) + case 6: WRITE(E3_MS3_PIN, ms3); break; + #endif + #if HAS_E4_MICROSTEPS && PIN_EXISTS(E4_MS3) + case 7: WRITE(E4_MS3_PIN, ms3); break; + #endif + #if HAS_E5_MICROSTEPS && PIN_EXISTS(E5_MS3) + case 8: WRITE(E5_MS3_PIN, ms3); break; + #endif + } } void Stepper::microstep_mode(const uint8_t driver, const uint8_t stepping_mode) { switch (stepping_mode) { - case 1: microstep_ms(driver, MICROSTEP1); break; - #if ENABLED(HEROIC_STEPPER_DRIVERS) - case 128: microstep_ms(driver, MICROSTEP128); break; - #else + #if HAS_MICROSTEP1 + case 1: microstep_ms(driver, MICROSTEP1); break; + #endif + #if HAS_MICROSTEP2 case 2: microstep_ms(driver, MICROSTEP2); break; + #endif + #if HAS_MICROSTEP4 case 4: microstep_ms(driver, MICROSTEP4); break; #endif - case 8: microstep_ms(driver, MICROSTEP8); break; - case 16: microstep_ms(driver, MICROSTEP16); break; - #if MB(ALLIGATOR) + #if HAS_MICROSTEP8 + case 8: microstep_ms(driver, MICROSTEP8); break; + #endif + #if HAS_MICROSTEP16 + case 16: microstep_ms(driver, MICROSTEP16); break; + #endif + #if HAS_MICROSTEP32 case 32: microstep_ms(driver, MICROSTEP32); break; #endif + #if HAS_MICROSTEP64 + case 64: microstep_ms(driver, MICROSTEP64); break; + #endif + #if HAS_MICROSTEP128 + case 128: microstep_ms(driver, MICROSTEP128); break; + #endif + default: SERIAL_ERROR_START(); SERIAL_ERRORLNPGM("Microsteps unavailable"); break; } } void Stepper::microstep_readings() { - SERIAL_PROTOCOLLNPGM("MS1,MS2 Pins"); + SERIAL_PROTOCOLLNPGM("MS1,MS2,MS3 Pins"); SERIAL_PROTOCOLPGM("X: "); - SERIAL_PROTOCOL(READ(X_MS1_PIN)); - SERIAL_PROTOCOLLN(READ(X_MS2_PIN)); + #if HAS_X_MICROSTEPS + SERIAL_PROTOCOL(READ(X_MS1_PIN)); + SERIAL_PROTOCOL(READ(X_MS2_PIN)); + #if PIN_EXISTS(X_MS3) + SERIAL_PROTOCOLLN(READ(X_MS3_PIN)); + #endif + #endif #if HAS_Y_MICROSTEPS SERIAL_PROTOCOLPGM("Y: "); SERIAL_PROTOCOL(READ(Y_MS1_PIN)); - SERIAL_PROTOCOLLN(READ(Y_MS2_PIN)); + SERIAL_PROTOCOL(READ(Y_MS2_PIN)); + #if PIN_EXISTS(Y_MS3) + SERIAL_PROTOCOLLN(READ(Y_MS3_PIN)); + #endif #endif #if HAS_Z_MICROSTEPS SERIAL_PROTOCOLPGM("Z: "); SERIAL_PROTOCOL(READ(Z_MS1_PIN)); - SERIAL_PROTOCOLLN(READ(Z_MS2_PIN)); + SERIAL_PROTOCOL(READ(Z_MS2_PIN)); + #if PIN_EXISTS(Z_MS3) + SERIAL_PROTOCOLLN(READ(Z_MS3_PIN)); + #endif #endif #if HAS_E0_MICROSTEPS SERIAL_PROTOCOLPGM("E0: "); SERIAL_PROTOCOL(READ(E0_MS1_PIN)); - SERIAL_PROTOCOLLN(READ(E0_MS2_PIN)); + SERIAL_PROTOCOL(READ(E0_MS2_PIN)); + #if PIN_EXISTS(E0_MS3) + SERIAL_PROTOCOLLN(READ(E0_MS3_PIN)); + #endif #endif #if HAS_E1_MICROSTEPS SERIAL_PROTOCOLPGM("E1: "); SERIAL_PROTOCOL(READ(E1_MS1_PIN)); - SERIAL_PROTOCOLLN(READ(E1_MS2_PIN)); + SERIAL_PROTOCOL(READ(E1_MS2_PIN)); + #if PIN_EXISTS(E1_MS3) + SERIAL_PROTOCOLLN(READ(E1_MS3_PIN)); + #endif #endif #if HAS_E2_MICROSTEPS SERIAL_PROTOCOLPGM("E2: "); SERIAL_PROTOCOL(READ(E2_MS1_PIN)); - SERIAL_PROTOCOLLN(READ(E2_MS2_PIN)); + SERIAL_PROTOCOL(READ(E2_MS2_PIN)); + #if PIN_EXISTS(E2_MS3) + SERIAL_PROTOCOLLN(READ(E2_MS3_PIN)); + #endif #endif #if HAS_E3_MICROSTEPS SERIAL_PROTOCOLPGM("E3: "); SERIAL_PROTOCOL(READ(E3_MS1_PIN)); - SERIAL_PROTOCOLLN(READ(E3_MS2_PIN)); + SERIAL_PROTOCOL(READ(E3_MS2_PIN)); + #if PIN_EXISTS(E3_MS3) + SERIAL_PROTOCOLLN(READ(E3_MS3_PIN)); + #endif #endif #if HAS_E4_MICROSTEPS SERIAL_PROTOCOLPGM("E4: "); SERIAL_PROTOCOL(READ(E4_MS1_PIN)); - SERIAL_PROTOCOLLN(READ(E4_MS2_PIN)); + SERIAL_PROTOCOL(READ(E4_MS2_PIN)); + #if PIN_EXISTS(E4_MS3) + SERIAL_PROTOCOLLN(READ(E4_MS3_PIN)); + #endif #endif #if HAS_E5_MICROSTEPS SERIAL_PROTOCOLPGM("E5: "); SERIAL_PROTOCOL(READ(E5_MS1_PIN)); SERIAL_PROTOCOLLN(READ(E5_MS2_PIN)); + #if PIN_EXISTS(E5_MS3) + SERIAL_PROTOCOLLN(READ(E5_MS3_PIN)); + #endif #endif } diff --git a/Marlin/src/module/stepper.h b/Marlin/src/module/stepper.h index 0ebe1d6e20..95f28dc914 100644 --- a/Marlin/src/module/stepper.h +++ b/Marlin/src/module/stepper.h @@ -413,7 +413,7 @@ class Stepper { #endif #if HAS_MICROSTEPS - static void microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2); + static void microstep_ms(const uint8_t driver, const int8_t ms1, const int8_t ms2, const int8_t ms3); static void microstep_mode(const uint8_t driver, const uint8_t stepping); static void microstep_readings(); #endif diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 81eacf5df2..b3cd117f48 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -427,12 +427,18 @@ #ifndef X_MS2_PIN #define X_MS2_PIN -1 #endif +#ifndef X_MS3_PIN + #define X_MS3_PIN -1 +#endif #ifndef Y_MS1_PIN #define Y_MS1_PIN -1 #endif #ifndef Y_MS2_PIN #define Y_MS2_PIN -1 #endif +#ifndef Y_MS3_PIN + #define Y_MS3_PIN -1 +#endif #ifndef Z_MS1_PIN #define Z_MS1_PIN -1 #endif @@ -448,18 +454,27 @@ #ifndef E0_MS2_PIN #define E0_MS2_PIN -1 #endif +#ifndef E0_MS3_PIN + #define E0_MS3_PIN -1 +#endif #ifndef E1_MS1_PIN #define E1_MS1_PIN -1 #endif #ifndef E1_MS2_PIN #define E1_MS2_PIN -1 #endif +#ifndef E1_MS3_PIN + #define E1_MS3_PIN -1 +#endif #ifndef E2_MS1_PIN #define E2_MS1_PIN -1 #endif #ifndef E2_MS2_PIN #define E2_MS2_PIN -1 #endif +#ifndef E2_MS3_PIN + #define E2_MS3_PIN -1 +#endif #ifndef E3_MS1_PIN #define E3_MS1_PIN -1 #endif @@ -907,19 +922,21 @@ #define X2_STEP_PIN _EPIN(E_STEPPERS, STEP) #define X2_DIR_PIN _EPIN(E_STEPPERS, DIR) #define X2_ENABLE_PIN _EPIN(E_STEPPERS, ENABLE) - #ifndef X2_CS_PIN - #define X2_CS_PIN _EPIN(E_STEPPERS, CS) - #endif - #if E_STEPPERS > MAX_EXTRUDERS || !PIN_EXISTS(X2_ENABLE) + #if E_STEPPERS >= MAX_EXTRUDERS || !PIN_EXISTS(X2_STEP) #error "No E stepper plug left for X2!" #endif #endif - #undef _X2_PINS - #define __X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN, - #ifdef X2_CS_PIN - #define _X2_PINS __X2_PINS X2_CS_PIN, - #else - #define _X2_PINS __X2_PINS + #ifndef X2_CS_PIN + #define X2_CS_PIN _EPIN(E_STEPPERS, CS) + #endif + #ifndef X2_MS1_PIN + #define X2_MS1_PIN _EPIN(E_STEPPERS, MS1) + #endif + #ifndef X2_MS2_PIN + #define X2_MS2_PIN _EPIN(E_STEPPERS, MS2) + #endif + #ifndef X2_MS3_PIN + #define X2_MS3_PIN _EPIN(E_STEPPERS, MS3) #endif #define Y2_E_INDEX INCREMENT(E_STEPPERS) #else @@ -932,19 +949,21 @@ #define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP) #define Y2_DIR_PIN _EPIN(Y2_E_INDEX, DIR) #define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE) - #ifndef Y2_CS_PIN - #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS) - #endif - #if Y2_E_INDEX > MAX_EXTRUDERS || !PIN_EXISTS(Y2_ENABLE) + #if Y2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Y2_STEP) #error "No E stepper plug left for Y2!" #endif #endif - #undef _Y2_PINS - #define __Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN, - #ifdef Y2_CS_PIN - #define _Y2_PINS __Y2_PINS Y2_CS_PIN, - #else - #define _Y2_PINS __Y2_PINS + #ifndef Y2_CS_PIN + #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS) + #endif + #ifndef Y2_MS1_PIN + #define Y2_MS1_PIN _EPIN(Y2_E_INDEX, MS1) + #endif + #ifndef Y2_MS2_PIN + #define Y2_MS2_PIN _EPIN(Y2_E_INDEX, MS2) + #endif + #ifndef Y2_MS3_PIN + #define Y2_MS3_PIN _EPIN(Y2_E_INDEX, MS3) #endif #define Z2_E_INDEX INCREMENT(Y2_E_INDEX) #else @@ -957,19 +976,21 @@ #define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP) #define Z2_DIR_PIN _EPIN(Z2_E_INDEX, DIR) #define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE) - #ifndef Z2_CS_PIN - #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS) - #endif - #if Z2_E_INDEX > MAX_EXTRUDERS || !PIN_EXISTS(Z2_ENABLE) + #if Z2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z2_STEP) #error "No E stepper plug left for Z2!" #endif #endif - #undef _Z2_PINS - #define __Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN, - #ifdef Z2_CS_PIN - #define _Z2_PINS __Z2_PINS Z2_CS_PIN, - #else - #define _Z2_PINS __Z2_PINS + #ifndef Z2_CS_PIN + #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS) + #endif + #ifndef Z2_MS1_PIN + #define Z2_MS1_PIN _EPIN(Z2_E_INDEX, MS1) + #endif + #ifndef Z2_MS2_PIN + #define Z2_MS2_PIN _EPIN(Z2_E_INDEX, MS2) + #endif + #ifndef Z2_MS3_PIN + #define Z2_MS3_PIN _EPIN(Z2_E_INDEX, MS3) #endif #define Z3_E_INDEX INCREMENT(Z2_E_INDEX) #else @@ -981,19 +1002,21 @@ #define Z3_STEP_PIN _EPIN(Z3_E_INDEX, STEP) #define Z3_DIR_PIN _EPIN(Z3_E_INDEX, DIR) #define Z3_ENABLE_PIN _EPIN(Z3_E_INDEX, ENABLE) - #ifndef Z3_CS_PIN - #define Z3_CS_PIN _EPIN(Z3_E_INDEX, CS) - #endif - #if Z3_E_INDEX > 4 || !PIN_EXISTS(Z3_ENABLE) + #if Z3_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z3_STEP) #error "No E stepper plug left for Z3!" #endif #endif - #undef _Z3_PINS - #define __Z3_PINS Z3_STEP_PIN, Z3_DIR_PIN, Z3_ENABLE_PIN, - #ifdef Z3_CS_PIN - #define _Z3_PINS __Z3_PINS Z3_CS_PIN, - #else - #define _Z3_PINS __Z3_PINS + #ifndef Z3_CS_PIN + #define Z3_CS_PIN _EPIN(Z3_E_INDEX, CS) + #endif + #ifndef Z3_MS1_PIN + #define Z3_MS1_PIN _EPIN(Z3_E_INDEX, MS1) + #endif + #ifndef Z3_MS2_PIN + #define Z3_MS2_PIN _EPIN(Z3_E_INDEX, MS2) + #endif + #ifndef Z3_MS3_PIN + #define Z3_MS3_PIN _EPIN(Z3_E_INDEX, MS3) #endif #endif diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index e6ac174c17..df4e163298 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -268,6 +268,9 @@ #if PIN_EXISTS(E0_MS2) REPORT_NAME_DIGITAL(__LINE__, E0_MS2_PIN) #endif +#if PIN_EXISTS(E0_MS3) + REPORT_NAME_DIGITAL(__LINE__, E0_MS3_PIN) +#endif #if PIN_EXISTS(E0_STEP) REPORT_NAME_DIGITAL(__LINE__, E0_STEP_PIN) #endif @@ -289,6 +292,9 @@ #if PIN_EXISTS(E1_MS2) REPORT_NAME_DIGITAL(__LINE__, E1_MS2_PIN) #endif +#if PIN_EXISTS(E1_MS3) + REPORT_NAME_DIGITAL(__LINE__, E1_MS3_PIN) +#endif #if PIN_EXISTS(E1_STEP) REPORT_NAME_DIGITAL(__LINE__, E1_STEP_PIN) #endif @@ -310,6 +316,9 @@ #if PIN_EXISTS(E2_MS2) REPORT_NAME_DIGITAL(__LINE__, E2_MS2_PIN) #endif +#if PIN_EXISTS(E2_MS3) + REPORT_NAME_DIGITAL(__LINE__, E2_MS3_PIN) +#endif #if PIN_EXISTS(E2_STEP) REPORT_NAME_DIGITAL(__LINE__, E2_STEP_PIN) #endif @@ -881,6 +890,9 @@ #if PIN_EXISTS(X_MS2) REPORT_NAME_DIGITAL(__LINE__, X_MS2_PIN) #endif +#if PIN_EXISTS(X_MS3) + REPORT_NAME_DIGITAL(__LINE__, X_MS3_PIN) +#endif #if PIN_EXISTS(X_STEP) REPORT_NAME_DIGITAL(__LINE__, X_STEP_PIN) #endif @@ -893,6 +905,15 @@ #if PIN_EXISTS(X2_ENABLE) REPORT_NAME_DIGITAL(__LINE__, X2_ENABLE_PIN) #endif +#if PIN_EXISTS(X2_MS1) + REPORT_NAME_DIGITAL(__LINE__, X2_MS1_PIN) +#endif +#if PIN_EXISTS(X2_MS2) + REPORT_NAME_DIGITAL(__LINE__, X2_MS2_PIN) +#endif +#if PIN_EXISTS(X2_MS3) + REPORT_NAME_DIGITAL(__LINE__, X2_MS3_PIN) +#endif #if PIN_EXISTS(X2_STEP) REPORT_NAME_DIGITAL(__LINE__, X2_STEP_PIN) #endif @@ -920,6 +941,9 @@ #if PIN_EXISTS(Y_MS2) REPORT_NAME_DIGITAL(__LINE__, Y_MS2_PIN) #endif +#if PIN_EXISTS(Y_MS3) + REPORT_NAME_DIGITAL(__LINE__, Y_MS3_PIN) +#endif #if PIN_EXISTS(Y_STEP) REPORT_NAME_DIGITAL(__LINE__, Y_STEP_PIN) #endif @@ -932,6 +956,15 @@ #if PIN_EXISTS(Y2_ENABLE) REPORT_NAME_DIGITAL(__LINE__, Y2_ENABLE_PIN) #endif +#if PIN_EXISTS(Y2_MS1) + REPORT_NAME_DIGITAL(__LINE__, Y2_MS1_PIN) +#endif +#if PIN_EXISTS(Y2_MS2) + REPORT_NAME_DIGITAL(__LINE__, Y2_MS2_PIN) +#endif +#if PIN_EXISTS(Y2_MS3) + REPORT_NAME_DIGITAL(__LINE__, Y2_MS3_PIN) +#endif #if PIN_EXISTS(Y2_STEP) REPORT_NAME_DIGITAL(__LINE__, Y2_STEP_PIN) #endif @@ -962,6 +995,9 @@ #if PIN_EXISTS(Z_MS2) REPORT_NAME_DIGITAL(__LINE__, Z_MS2_PIN) #endif +#if PIN_EXISTS(Z_MS3) + REPORT_NAME_DIGITAL(__LINE__, Z_MS3_PIN) +#endif #if PIN_EXISTS(Z_STEP) REPORT_NAME_DIGITAL(__LINE__, Z_STEP_PIN) #endif diff --git a/Marlin/src/pins/pins_RURAMPS4D_11.h b/Marlin/src/pins/pins_RURAMPS4D_11.h index d05b74b04c..7b78ffc7b7 100644 --- a/Marlin/src/pins/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/pins_RURAMPS4D_11.h @@ -119,9 +119,6 @@ //#define E3_MS1_PIN ? //#define E3_MS2_PIN ? //#define E3_MS3_PIN ? -//#define Z2_MS1_PIN ? // shared with E3_MS1_PIN -//#define Z2_MS2_PIN ? // shared with E3_MS2_PIN -//#define Z2_MS3_PIN ? // shared with E3_MS3_PIN #if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) #define Z_MIN_PROBE_PIN 49