melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Apply spacing in pins files

Browse Source
2.0.x
Scott Lahteine 7 years ago
parent 4d533b9baa
commit 436e5b7ea3
76 changed files with 953 additions and 972 deletions
Show Stats Download Patch File Download Diff File

6
Marlin/src/pins/pins_3DRAG.h
Unescape Escape View File

@ -153,11 +153,11 @@
#define Z_DIR_PIN 28 #define Z_DIR_PIN 28
#define Z_ENABLE_PIN 24 #define Z_ENABLE_PIN 24
#define Z_STEP_PIN 26 #define Z_STEP_PIN 26
#define SPINDLE_LASER_PWM_PIN 46 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 46 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 62 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 62 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 48 #define SPINDLE_DIR_PIN 48
#elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // use expansion header if no LCD in use #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // use expansion header if no LCD in use
#define SPINDLE_LASER_ENABLE_PIN 16 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 16 // Pin should have a pullup/pulldown!
#define SPINDLE_DIR_PIN 17 #define SPINDLE_DIR_PIN 17
#endif #endif
#endif #endif

2
Marlin/src/pins/pins_5DPRINT.h
Unescape Escape View File

@ -140,4 +140,4 @@
#define SDSS 20 // B0 #define SDSS 20 // B0
//DIGIPOTS slave addresses //DIGIPOTS slave addresses
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1) #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1)

96
Marlin/src/pins/pins_ALLIGATOR_R2.h
Unescape Escape View File

@ -42,51 +42,51 @@
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN 33 // PC1 #define X_MIN_PIN 33 // PC1
#define X_MAX_PIN 34 // PC2 #define X_MAX_PIN 34 // PC2
#define Y_MIN_PIN 35 // PC3 #define Y_MIN_PIN 35 // PC3
#define Y_MAX_PIN 37 // PC5 #define Y_MAX_PIN 37 // PC5
#define Z_MIN_PIN 38 // PC6 #define Z_MIN_PIN 38 // PC6
#define Z_MAX_PIN 39 // PC7 #define Z_MAX_PIN 39 // PC7
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 96 // PB24 #define X_STEP_PIN 96 // PB24
#define X_DIR_PIN 2 // PB25 #define X_DIR_PIN 2 // PB25
#define X_ENABLE_PIN 24 // PA15, motor RESET pin #define X_ENABLE_PIN 24 // PA15, motor RESET pin
#define Y_STEP_PIN 94 // PB22 #define Y_STEP_PIN 94 // PB22
#define Y_DIR_PIN 95 // PB23 #define Y_DIR_PIN 95 // PB23
#define Y_ENABLE_PIN 24 // PA15, motor RESET pin #define Y_ENABLE_PIN 24 // PA15, motor RESET pin
#define Z_STEP_PIN 98 // PC27 #define Z_STEP_PIN 98 // PC27
#define Z_DIR_PIN 3 // PC28 #define Z_DIR_PIN 3 // PC28
#define Z_ENABLE_PIN 24 // PA15, motor RESET pin #define Z_ENABLE_PIN 24 // PA15, motor RESET pin
#define E0_STEP_PIN 5 // PC25 #define E0_STEP_PIN 5 // PC25
#define E0_DIR_PIN 4 // PC26 #define E0_DIR_PIN 4 // PC26
#define E0_ENABLE_PIN 24 // PA15, motor RESET pin #define E0_ENABLE_PIN 24 // PA15, motor RESET pin
#define E1_STEP_PIN 28 // PD3 on piggy #define E1_STEP_PIN 28 // PD3 on piggy
#define E1_DIR_PIN 27 // PD2 on piggy #define E1_DIR_PIN 27 // PD2 on piggy
#define E1_ENABLE_PIN 24 // PA15, motor RESET pin #define E1_ENABLE_PIN 24 // PA15, motor RESET pin
#define E2_STEP_PIN 11 // PD7 on piggy #define E2_STEP_PIN 11 // PD7 on piggy
#define E2_DIR_PIN 29 // PD6 on piggy #define E2_DIR_PIN 29 // PD6 on piggy
#define E2_ENABLE_PIN 24 // PA15, motor RESET pin #define E2_ENABLE_PIN 24 // PA15, motor RESET pin
#define E3_STEP_PIN 30 // PD9 on piggy #define E3_STEP_PIN 30 // PD9 on piggy
#define E3_DIR_PIN 12 // PD8 on piggy #define E3_DIR_PIN 12 // PD8 on piggy
#define E3_ENABLE_PIN 24 // PA15, motor RESET pin #define E3_ENABLE_PIN 24 // PA15, motor RESET pin
// Microstepping pins - Mapping not from fastio.h (?) // Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN 99 // PC10 #define X_MS1_PIN 99 // PC10
#define Y_MS1_PIN 10 // PC29 #define Y_MS1_PIN 10 // PC29
#define Z_MS1_PIN 44 // PC19 #define Z_MS1_PIN 44 // PC19
#define E0_MS1_PIN 45 // PC18 #define E0_MS1_PIN 45 // PC18
//#define MOTOR_FAULT_PIN 22 // PB26 , motor X-Y-Z-E0 motor FAULT //#define MOTOR_FAULT_PIN 22 // PB26 , motor X-Y-Z-E0 motor FAULT
// //
// Temperature Sensors // Temperature Sensors
@ -101,41 +101,41 @@
// Heaters / Fans // Heaters / Fans
// //
// Note that on the Due pin A0 on the board is channel 2 on the ARM chip // Note that on the Due pin A0 on the board is channel 2 on the ARM chip
#define HEATER_0_PIN 68 // PA1 #define HEATER_0_PIN 68 // PA1
#define HEATER_1_PIN 8 // PC22 on piggy #define HEATER_1_PIN 8 // PC22 on piggy
#define HEATER_2_PIN 9 // PC21 on piggy #define HEATER_2_PIN 9 // PC21 on piggy
#define HEATER_3_PIN 97 // PC20 on piggy #define HEATER_3_PIN 97 // PC20 on piggy
#define HEATER_BED_PIN 69 // PA0 #define HEATER_BED_PIN 69 // PA0
#define FAN_PIN 92 // PA5 #define FAN_PIN 92 // PA5
#define FAN1_PIN 31 // PA7 #define FAN1_PIN 31 // PA7
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 77 // PA28 #define SDSS 77 // PA28
#define SD_DETECT_PIN 87 // PA29 #define SD_DETECT_PIN 87 // PA29
#define LED_RED_PIN 40 // PC8 #define LED_RED_PIN 40 // PC8
#define LED_GREEN_PIN 41 // PC9 #define LED_GREEN_PIN 41 // PC9
#define EXP_VOLTAGE_LEVEL_PIN 65 #define EXP_VOLTAGE_LEVEL_PIN 65
#define SPI_CHAN_DAC 1 #define SPI_CHAN_DAC 1
#define DAC0_SYNC 53 // PB14 #define DAC0_SYNC 53 // PB14
#define DAC1_SYNC 6 // PC24 #define DAC1_SYNC 6 // PC24
// 64K SPI EEPROM // 64K SPI EEPROM
#define SPI_EEPROM #define SPI_EEPROM
#define SPI_CHAN_EEPROM1 2 #define SPI_CHAN_EEPROM1 2
#define SPI_EEPROM1_CS 25 // PD0 #define SPI_EEPROM1_CS 25 // PD0
// 2K SPI EEPROM // 2K SPI EEPROM
#define SPI_EEPROM2_CS 26 // PD1 #define SPI_EEPROM2_CS 26 // PD1
// FLASH SPI // FLASH SPI
// 32Mb // 32Mb
#define SPI_FLASH_CS 23 // PA14 #define SPI_FLASH_CS 23 // PA14
// //
// LCD / Controller // LCD / Controller

14
Marlin/src/pins/pins_ANET_10.h
Unescape Escape View File

@ -125,14 +125,14 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 7 // Analog Input (pin 33 extruder) #define TEMP_0_PIN 7 // Analog Input (pin 33 extruder)
#define TEMP_BED_PIN 6 // Analog Input (pin 34 bed) #define TEMP_BED_PIN 6 // Analog Input (pin 34 bed)
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 13 // (extruder) #define HEATER_0_PIN 13 // (extruder)
#define HEATER_BED_PIN 12 // (bed) #define HEATER_BED_PIN 12 // (bed)
#define FAN_PIN 4 #define FAN_PIN 4
// //
@ -153,7 +153,7 @@
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define LCD_SDSS 28 #define LCD_SDSS 28
#if ENABLED(ADC_KEYPAD) #if ENABLED(ADC_KEYPAD)
#define SERVO0_PIN 27 // free for BLTouch/3D-Touch #define SERVO0_PIN 27 // free for BLTouch/3D-Touch
#define LCD_PINS_RS 28 #define LCD_PINS_RS 28
#define LCD_PINS_ENABLE 29 #define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 10 #define LCD_PINS_D4 10
@ -168,7 +168,7 @@
// Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics // Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics
// display using an adapter board // https://go.aisler.net/benlye/anet-lcd-adapter/pcb // display using an adapter board // https://go.aisler.net/benlye/anet-lcd-adapter/pcb
// See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748 // See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748
#define SERVO0_PIN 29 // free for BLTouch/3D-Touch #define SERVO0_PIN 29 // free for BLTouch/3D-Touch
#define BEEPER_PIN 17 #define BEEPER_PIN 17
#define LCD_PINS_RS 27 #define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 28 #define LCD_PINS_ENABLE 28
@ -201,7 +201,7 @@
* published by oderwat on Thingiverse at https://www.thingiverse.com/thing:2103748. * published by oderwat on Thingiverse at https://www.thingiverse.com/thing:2103748.
* *
* Using that adapter requires changing the pin definition as follows: * Using that adapter requires changing the pin definition as follows:
* #define SERVO0_PIN 27 // free for BLTouch/3D-Touch * #define SERVO0_PIN 27 // free for BLTouch/3D-Touch
* #define BEEPER_PIN 28 * #define BEEPER_PIN 28
* #define LCD_PINS_RS 30 * #define LCD_PINS_RS 30
* #define LCD_PINS_ENABLE 29 * #define LCD_PINS_ENABLE 29

6
Marlin/src/pins/pins_AZSMZ_MINI.h
Unescape Escape View File

@ -72,9 +72,9 @@
// Temperature Sensors // Temperature Sensors
// 3.3V max when defined as an analog input // 3.3V max when defined as an analog input
// //
#define TEMP_0_PIN 0 // A0 (TH1) #define TEMP_0_PIN 0 // A0 (TH1)
#define TEMP_BED_PIN 1 // A1 (TH2) #define TEMP_BED_PIN 1 // A1 (TH2)
#define TEMP_1_PIN 2 // A2 (TH3) #define TEMP_1_PIN 2 // A2 (TH3)
// //
// Heaters / Fans // Heaters / Fans

14
Marlin/src/pins/pins_AZTEEG_X3.h
Unescape Escape View File

@ -32,8 +32,8 @@
#error "Azteeg X3 supports up to 2 hotends / E-steppers. Comment out this line to continue." #error "Azteeg X3 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif #endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#define CASE_LIGHT_PIN 6 // must define it here or else RAMPS will define it #define CASE_LIGHT_PIN 6 // Define before RAMPS pins include
#endif #endif
#define BOARD_NAME "Azteeg X3" #define BOARD_NAME "Azteeg X3"
@ -44,8 +44,8 @@
// //
#undef SERVO0_PIN #undef SERVO0_PIN
#undef SERVO1_PIN #undef SERVO1_PIN
#define SERVO0_PIN 44 // SERVO1 port #define SERVO0_PIN 44 // SERVO1 port
#define SERVO1_PIN 55 // SERVO2 port #define SERVO1_PIN 55 // SERVO2 port
// //
// LCD / Controller // LCD / Controller
@ -91,9 +91,9 @@
#undef SCL #undef SCL
#if SERVO0_PIN == 7 #if SERVO0_PIN == 7
#undef SERVO0_PIN #undef SERVO0_PIN
#def SERVO0_PIN 11 #define SERVO0_PIN 11
#endif #endif
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 21 #define SPINDLE_DIR_PIN 21
#endif #endif

29
Marlin/src/pins/pins_AZTEEG_X3_PRO.h
Unescape Escape View File

@ -28,11 +28,10 @@
#error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue." #error "Azteeg X3 Pro supports up to 5 hotends / E-steppers. Comment out this line to continue."
#endif #endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT)
#define CASE_LIGHT_PIN 44 // must define it here or else RAMPS will define it #define CASE_LIGHT_PIN 44 // Define before RAMPS pins include
#endif #endif
#define BOARD_NAME "Azteeg X3 Pro" #define BOARD_NAME "Azteeg X3 Pro"
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
@ -42,8 +41,8 @@
#endif #endif
// DIGIPOT slave addresses // DIGIPOT slave addresses
#define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1)
#define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1)
// //
// Servos // Servos
@ -118,10 +117,10 @@
#define HEATER_7_PIN 11 #define HEATER_7_PIN 11
#undef FAN_PIN #undef FAN_PIN
#define FAN_PIN 6 // Part Cooling System #define FAN_PIN 6 // Part Cooling System
#ifndef CONTROLLER_FAN_PIN #ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) #define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable)
#endif #endif
// Fans/Water Pump to cool the hotend cool side. // Fans/Water Pump to cool the hotend cool side.
@ -140,7 +139,7 @@
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN 49 // For easy adapter board #define SD_DETECT_PIN 49 // For easy adapter board
#undef BEEPER_PIN #undef BEEPER_PIN
#define BEEPER_PIN 12 // 33 isn't physically available to the LCD display #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
#else #else
#define STAT_LED_RED_PIN 32 #define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35 #define STAT_LED_BLUE_PIN 35
@ -150,9 +149,9 @@
// Misc. Functions // Misc. Functions
// //
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN #if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
#undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it #undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it
#define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments
// as the wiring diagram uses pin 44 for DOGLCD_A0 // as the wiring diagram uses pin 44 for DOGLCD_A0
#endif #endif
// //
@ -162,13 +161,13 @@
#undef SPINDLE_LASER_ENABLE_PIN #undef SPINDLE_LASER_ENABLE_PIN
#undef SPINDLE_DIR_PIN #undef SPINDLE_DIR_PIN
#if ENABLED(SPINDLE_LASER_ENABLE) // use EXP2 header #if ENABLED(SPINDLE_LASER_ENABLE) // EXP2 header
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#undef BTN_EN2 #undef BTN_EN2
#define BTN_EN2 31 // need 7 for the spindle speed PWM #define BTN_EN2 31 // need 7 for the spindle speed PWM
#endif #endif
#define SPINDLE_LASER_PWM_PIN 7 // must have a hardware PWM #define SPINDLE_LASER_PWM_PIN 7 // must have a hardware PWM
#define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 21 #define SPINDLE_DIR_PIN 21
#endif #endif

8
Marlin/src/pins/pins_AZTEEG_X5_GT.h
Unescape Escape View File

@ -73,9 +73,9 @@
// Temperature Sensors // Temperature Sensors
// 3.3V max when defined as an analog input // 3.3V max when defined as an analog input
// //
#define TEMP_BED_PIN 0 // A0 (TH1) #define TEMP_BED_PIN 0 // A0 (TH1)
#define TEMP_0_PIN 1 // A1 (TH2) #define TEMP_0_PIN 1 // A1 (TH2)
#define TEMP_1_PIN 2 // A2 (TH3) #define TEMP_1_PIN 2 // A2 (TH3)
// //
@ -101,7 +101,7 @@
#define BTN_EN2 P3_26 #define BTN_EN2 P3_26
#define BTN_ENC P2_11 #define BTN_ENC P2_11
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN -1 #define KILL_PIN -1

4
Marlin/src/pins/pins_BAM_DICE_DUE.h
Unescape Escape View File

@ -33,9 +33,9 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 66 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 66 // Pin should have a pullup/pulldown!
#define SPINDLE_DIR_PIN 67 #define SPINDLE_DIR_PIN 67
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#include "pins_RAMPS.h" #include "pins_RAMPS.h"

24
Marlin/src/pins/pins_BEAST.h
Unescape Escape View File

@ -95,7 +95,7 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN PD12 // EXTRUDER 1 #define HEATER_0_PIN PD12 // EXTRUDER 1
#define HEATER_1_PIN PD13 #define HEATER_1_PIN PD13
#define HEATER_2_PIN PD14 #define HEATER_2_PIN PD14
@ -121,9 +121,9 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
#define LCD_PINS_RS PB8 #define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2 #define LCD_PINS_ENABLE PD2
@ -184,8 +184,8 @@
#elif ENABLED(LCD_I2C_VIKI) #elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1 #define BTN_ENC -1
#define LCD_SDSS 53 #define LCD_SDSS 53
@ -205,7 +205,7 @@
#define BTN_ENC 39 #define BTN_ENC 39
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31 #define KILL_PIN 31
@ -231,7 +231,7 @@
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 66 #define DOGLCD_CS 66
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define SDSS 53 #define SDSS 53
#define KILL_PIN 64 #define KILL_PIN 64
@ -262,9 +262,9 @@
#define SHIFT_CLK 44 #define SHIFT_CLK 44
#define SHIFT_LD 42 #define SHIFT_LD 42
#elif ENABLED(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4 #define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7 #define BTN_ENC 49 // AUX3 PIN 7
#else #else
#define BTN_EN1 37 #define BTN_EN1 37
#define BTN_EN2 35 #define BTN_EN2 35
@ -275,7 +275,7 @@
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define KILL_PIN 41 #define KILL_PIN 41
#else #else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this //#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif #endif
#endif #endif

44
Marlin/src/pins/pins_BIQU_BQ111_A4.h
Unescape Escape View File

@ -41,12 +41,12 @@
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN P1_24 //10k pullup to 3.3V, 1K series #define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 //10k pullup to 3.3V, 1K series #define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 //10k pullup to 3.3V, 1K series #define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 //10k pullup to 3.3V, 1K series #define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_28 //10k pullup to 3.3V, 1K series #define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series
#define Z_MAX_PIN P1_29 //10k pullup to 3.3V, 1K series #define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
// //
@ -73,8 +73,8 @@
// Temperature Sensors // Temperature Sensors
// 3.3V max when defined as an analog input // 3.3V max when defined as an analog input
// //
#define TEMP_0_PIN 0 // A0 (T0) #define TEMP_0_PIN 0 // A0 (T0)
#define TEMP_BED_PIN 1 // A1 (T1) #define TEMP_BED_PIN 1 // A1 (T1)
// //
@ -87,8 +87,8 @@
// //
// Unused // Unused
// //
//#define PIN_P2_10 P2_10 // IBOOT-1 //#define PIN_P2_10 P2_10 // IBOOT-1
//#define PIN_P0_27 P0_27 // Onboard SD Detect //#define PIN_P0_27 P0_27 // Onboard SD Detect
/** /**
* LCD / Controller * LCD / Controller
@ -102,16 +102,16 @@
*/ */
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN P1_31 // EXP1-1 #define BEEPER_PIN P1_31 // EXP1-1
#define BTN_EN1 P3_26 // EXP2-3 #define BTN_EN1 P3_26 // EXP2-3
#define BTN_EN2 P3_25 // EXP2-5 #define BTN_EN2 P3_25 // EXP2-5
#define BTN_ENC P1_30 // EXP1-2 #define BTN_ENC P1_30 // EXP1-2
#define SD_DETECT_PIN P0_27 // EXP2-7 #define SD_DETECT_PIN P0_27 // EXP2-7
#define LCD_PINS_RS P0_16 // EXP1-4 #define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
#define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && !ENABLED(DOGLCD) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && !ENABLED(DOGLCD)
#error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4"
@ -132,10 +132,10 @@
*/ */
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#define SCK_PIN P0_15 // EXP1-5 #define SCK_PIN P0_15 // EXP1-5
#define MISO_PIN P0_16 // EXP1-4 #define MISO_PIN P0_16 // EXP1-4
#define MOSI_PIN P0_18 // EXP1-3 #define MOSI_PIN P0_18 // EXP1-3
#define SS_PIN P1_30 // EXP1-2 #define SS_PIN P1_30 // EXP1-2
#define SDSS SS_PIN #define SDSS SS_PIN
#endif // SDSUPPORT #endif // SDSUPPORT

20
Marlin/src/pins/pins_BQ_ZUM_MEGA_3D.h
Unescape Escape View File

@ -49,13 +49,13 @@
// //
// Misc. Functions // Misc. Functions
// //
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 42 #define SPINDLE_DIR_PIN 42
#include "pins_RAMPS_13.h" #include "pins_RAMPS_13.h"
@ -64,16 +64,16 @@
// Limit Switches // Limit Switches
// //
#undef X_MAX_PIN #undef X_MAX_PIN
#define X_MAX_PIN 79 // 2 #define X_MAX_PIN 79 // 2
// //
// Z Probe (when not Z_MIN_PIN) // Z Probe (when not Z_MIN_PIN)
// //
#undef Z_MIN_PROBE_PIN #undef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 19 // IND_S_5V #define Z_MIN_PROBE_PIN 19 // IND_S_5V
#undef Z_ENABLE_PIN #undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 77 // 62 #define Z_ENABLE_PIN 77 // 62
// //
// Steppers // Steppers
@ -93,8 +93,8 @@
// //
// Misc. Functions // Misc. Functions
// //
#undef PS_ON_PIN // 12 #undef PS_ON_PIN // 12
#define PS_ON_PIN 81 // External Power Supply #define PS_ON_PIN 81 // External Power Supply
// This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team // This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team
@ -104,8 +104,8 @@
#ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
#undef Z_MIN_PIN #undef Z_MIN_PIN
#undef Z_MAX_PIN #undef Z_MAX_PIN
#define Z_MIN_PIN 19 // IND_S_5V #define Z_MIN_PIN 19 // IND_S_5V
#define Z_MAX_PIN 18 // Z-MIN Label #define Z_MAX_PIN 18 // Z-MIN Label
#endif #endif

0
Marlin/src/pins/pins_BRAINWAVE.h
Unescape Escape View File

0
Marlin/src/pins/pins_BRAINWAVE_PRO.h
Unescape Escape View File

4
Marlin/src/pins/pins_CHEAPTRONIC.h
Unescape Escape View File

@ -69,8 +69,8 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 19 // EXTRUDER 1 #define HEATER_0_PIN 19 // EXTRUDER 1
#define HEATER_1_PIN 23 // EXTRUDER 2 #define HEATER_1_PIN 23 // EXTRUDER 2
#define HEATER_BED_PIN 22 #define HEATER_BED_PIN 22
// //

24
Marlin/src/pins/pins_CHITU3D.h
Unescape Escape View File

@ -21,7 +21,7 @@
*/ */
#if !defined(__STM32F1__) && !defined(__STM32F4__) #if !defined(__STM32F1__) && !defined(__STM32F4__)
#error "Oops! Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
#endif #endif
/** /**
@ -120,9 +120,9 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
#define LCD_PINS_RS PB8 #define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2 #define LCD_PINS_ENABLE PD2
@ -183,8 +183,8 @@
#elif ENABLED(LCD_I2C_VIKI) #elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1 #define BTN_ENC -1
#define LCD_SDSS 53 #define LCD_SDSS 53
@ -204,7 +204,7 @@
#define BTN_ENC 39 #define BTN_ENC 39
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31 #define KILL_PIN 31
@ -229,7 +229,7 @@
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 66 #define DOGLCD_CS 66
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define SDSS 53 #define SDSS 53
#define KILL_PIN 64 #define KILL_PIN 64
@ -260,9 +260,9 @@
#define SHIFT_CLK 44 #define SHIFT_CLK 44
#define SHIFT_LD 42 #define SHIFT_LD 42
#elif ENABLED(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4 #define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7 #define BTN_ENC 49 // AUX3 PIN 7
#else #else
#define BTN_EN1 37 #define BTN_EN1 37
#define BTN_EN2 35 #define BTN_EN2 35
@ -273,7 +273,7 @@
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define KILL_PIN 41 #define KILL_PIN 41
#else #else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this //#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif #endif
#endif #endif

4
Marlin/src/pins/pins_CNCONTROLS_11.h
Unescape Escape View File

@ -65,7 +65,7 @@
#define HEATER_3_PIN 46 #define HEATER_3_PIN 46
#define HEATER_BED_PIN 2 #define HEATER_BED_PIN 2
//#define FAN_PIN 7 // common PWM pin for all tools //#define FAN_PIN 7 // common PWM pin for all tools
#define ORIG_E0_AUTO_FAN_PIN 7 #define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7 #define ORIG_E1_AUTO_FAN_PIN 7
@ -84,7 +84,7 @@
//#define TOOL_1_PIN 59 //#define TOOL_1_PIN 59
//#define TOOL_2_PIN 8 //#define TOOL_2_PIN 8
//#define TOOL_3_PIN 30 //#define TOOL_3_PIN 30
//#define TOOL_PWM_PIN 7 // common PWM pin for all tools //#define TOOL_PWM_PIN 7 // common PWM pin for all tools
// Common I/O // Common I/O

8
Marlin/src/pins/pins_CNCONTROLS_12.h
Unescape Escape View File

@ -65,7 +65,7 @@
#define HEATER_3_PIN 3 #define HEATER_3_PIN 3
#define HEATER_BED_PIN 24 #define HEATER_BED_PIN 24
#define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools
#define ORIG_E0_AUTO_FAN_PIN 7 #define ORIG_E0_AUTO_FAN_PIN 7
#define ORIG_E1_AUTO_FAN_PIN 7 #define ORIG_E1_AUTO_FAN_PIN 7
@ -81,9 +81,9 @@
// Tools // Tools
//#define TOOL_0_PIN 56 //#define TOOL_0_PIN 56
//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder //#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder
//#define TOOL_1_PIN 59 //#define TOOL_1_PIN 59
//#define TOOL_1_PWM_PIN 8 // lights at dual extruder //#define TOOL_1_PWM_PIN 8 // lights at dual extruder
//#define TOOL_2_PIN 4 //#define TOOL_2_PIN 4
//#define TOOL_2_PWM_PIN 5 //#define TOOL_2_PWM_PIN 5
//#define TOOL_3_PIN 14 //#define TOOL_3_PIN 14
@ -124,4 +124,4 @@
//#define UI2 37 //#define UI2 37
#define STAT_LED_BLUE_PIN -1 #define STAT_LED_BLUE_PIN -1
#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN #define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN

62
Marlin/src/pins/pins_COHESION3D_MINI.h
Unescape Escape View File

@ -41,12 +41,12 @@
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V #define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V #define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V #define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V #define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V #define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V #define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
// //
// Steppers // Steppers
@ -54,35 +54,35 @@
#define X_STEP_PIN P2_00 #define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05 #define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04 #define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 #define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define Y_STEP_PIN P2_01 #define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11 #define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10 #define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 #define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Z_STEP_PIN P2_02 #define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20 #define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19 #define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 #define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define E0_STEP_PIN P2_03 #define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22 #define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21 #define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 #define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
// //
// Default pins for TMC software SPI // Default pins for TMC software SPI
// //
#if ENABLED(TMC_USE_SW_SPI) #if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI #ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#endif #endif
#ifndef TMC_SW_MISO #ifndef TMC_SW_MISO
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#endif #endif
#ifndef TMC_SW_SCK #ifndef TMC_SW_SCK
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#endif #endif
#endif #endif
@ -90,16 +90,16 @@
// Analog Inputs // Analog Inputs
// 3.3V max when defined as an analog input // 3.3V max when defined as an analog input
// //
#define TEMP_0_PIN 0 // P0_23 #define TEMP_0_PIN 0 // P0_23
#define TEMP_BED_PIN 1 // P0_24 #define TEMP_BED_PIN 1 // P0_24
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_BED_PIN P2_05 #define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1 #define HEATER_0_PIN P2_07 // FET 1
#define AUTO_FAN_PIN P2_04 // FET 4 #define AUTO_FAN_PIN P2_04 // FET 4
#define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3 #define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3
// //
// Auto fans // Auto fans
@ -111,18 +111,18 @@
// //
// Misc. Functions // Misc. Functions
// //
#define LED_PIN P4_28 // Play LED #define LED_PIN P4_28 // Play LED
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#if ENABLED(SPINDLE_LASER_ENABLE) #if ENABLED(SPINDLE_LASER_ENABLE)
#undef HEATER_0_PIN #undef HEATER_0_PIN
#define SPINDLE_LASER_ENABLE_PIN P2_07 // FET 1 #define SPINDLE_LASER_ENABLE_PIN P2_07 // FET 1
#undef HEATER_BED_PIN #undef HEATER_BED_PIN
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#undef FAN_PIN #undef FAN_PIN
#define SPINDLE_DIR_PIN P2_06 // ReMix FET 4, Mini FET 3 #define SPINDLE_DIR_PIN P2_06 // ReMix FET 4, Mini FET 3
#endif #endif
// //
@ -137,18 +137,18 @@
// //
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN P0_27 // EXP2-7 - open drain #define BEEPER_PIN P0_27 // EXP2-7 - open drain
#define BTN_EN1 P3_26 // EXP2-5 #define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3 #define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2 #define BTN_ENC P1_30 // EXP1-2
#define LCD_PINS_RS P0_16 // EXP1-4 #define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4 #define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3 #define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5 #define LCD_PINS_D4 P0_15 // EXP1-5
#define KILL_PIN P2_11 // EXP2-10 #define KILL_PIN P2_11 // EXP2-10
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#error "SDSUPPORT is not currently supported by the Cohesion3D boards" #error "SDSUPPORT is not currently supported by the Cohesion3D boards"

80
Marlin/src/pins/pins_COHESION3D_REMIX.h
Unescape Escape View File

@ -41,12 +41,12 @@
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN P1_24 // 10k pullup to 3.3V #define X_MIN_PIN P1_24 // 10k pullup to 3.3V
#define X_MAX_PIN P1_25 // 10k pullup to 3.3V #define X_MAX_PIN P1_25 // 10k pullup to 3.3V
#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V #define Y_MIN_PIN P1_26 // 10k pullup to 3.3V
#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V #define Y_MAX_PIN P1_27 // 10k pullup to 3.3V
#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V #define Z_MIN_PIN P1_28 // 10k pullup to 3.3V
#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V #define Z_MAX_PIN P1_29 // 10k pullup to 3.3V
// //
// Steppers // Steppers
@ -54,45 +54,45 @@
#define X_STEP_PIN P2_00 #define X_STEP_PIN P2_00
#define X_DIR_PIN P0_05 #define X_DIR_PIN P0_05
#define X_ENABLE_PIN P0_04 #define X_ENABLE_PIN P0_04
#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 #define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9
#define Y_STEP_PIN P2_01 #define Y_STEP_PIN P2_01
#define Y_DIR_PIN P0_11 #define Y_DIR_PIN P0_11
#define Y_ENABLE_PIN P0_10 #define Y_ENABLE_PIN P0_10
#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 #define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10
#define Z_STEP_PIN P2_02 #define Z_STEP_PIN P2_02
#define Z_DIR_PIN P0_20 #define Z_DIR_PIN P0_20
#define Z_ENABLE_PIN P0_19 #define Z_ENABLE_PIN P0_19
#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 #define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11
#define E0_STEP_PIN P2_03 #define E0_STEP_PIN P2_03
#define E0_DIR_PIN P0_22 #define E0_DIR_PIN P0_22
#define E0_ENABLE_PIN P0_21 #define E0_ENABLE_PIN P0_21
#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 #define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12
#define E1_STEP_PIN P2_08 #define E1_STEP_PIN P2_08
#define E1_DIR_PIN P2_13 #define E1_DIR_PIN P2_13
#define E1_ENABLE_PIN P4_29 #define E1_ENABLE_PIN P4_29
#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14 #define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14
#define E2_STEP_PIN P1_20 #define E2_STEP_PIN P1_20
#define E2_DIR_PIN P1_19 #define E2_DIR_PIN P1_19
#define E2_ENABLE_PIN P1_21 #define E2_ENABLE_PIN P1_21
#define E2_CS_PIN P1_18 // FET 6 #define E2_CS_PIN P1_18 // FET 6
// //
// Default pins for TMC software SPI // Default pins for TMC software SPI
// //
#if ENABLED(TMC_USE_SW_SPI) #if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI #ifndef TMC_SW_MOSI
#define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5
#endif #endif
#ifndef TMC_SW_MISO #ifndef TMC_SW_MISO
#define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6
#endif #endif
#ifndef TMC_SW_SCK #ifndef TMC_SW_SCK
#define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7
#endif #endif
#endif #endif
@ -100,28 +100,28 @@
// Analog Inputs // Analog Inputs
// 3.3V max when defined as an analog input // 3.3V max when defined as an analog input
// //
#define TEMP_0_PIN 0 // P0_23 #define TEMP_0_PIN 0 // P0_23
#define TEMP_BED_PIN 1 // P0_24 #define TEMP_BED_PIN 1 // P0_24
#define TEMP_1_PIN 2 // P0_25 #define TEMP_1_PIN 2 // P0_25
#if ENABLED(FILAMENT_WIDTH_SENSOR) #if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILWIDTH_PIN 3 // P0_26 #define FILWIDTH_PIN 3 // P0_26
#else #else
#define TEMP_2_PIN 3 // P0_26 #define TEMP_2_PIN 3 // P0_26
#endif #endif
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_BED_PIN P2_05 #define HEATER_BED_PIN P2_05
#define HEATER_0_PIN P2_07 // FET 1 #define HEATER_0_PIN P2_07 // FET 1
#define HEATER_1_PIN P1_23 // FET 2 #define HEATER_1_PIN P1_23 // FET 2
#if HOTENDS == 3 #if HOTENDS == 3
#define HEATER_2_PIN P1_22 // FET 3 #define HEATER_2_PIN P1_22 // FET 3
#define AUTO_FAN_PIN P1_18 // FET 6 #define AUTO_FAN_PIN P1_18 // FET 6
#else #else
#define AUTO_FAN_PIN P1_22 // FET 3 #define AUTO_FAN_PIN P1_22 // FET 3
#endif #endif
#define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3 #define FAN_PIN P2_06 // ReMix FET 4, Mini FET 3
// //
// Auto fans // Auto fans
@ -133,18 +133,18 @@
// //
// Misc. Functions // Misc. Functions
// //
#define LED_PIN P4_28 // Play LED #define LED_PIN P4_28 // Play LED
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#if ENABLED(SPINDLE_LASER_ENABLE) #if ENABLED(SPINDLE_LASER_ENABLE)
#undef HEATER_0_PIN #undef HEATER_0_PIN
#define SPINDLE_LASER_ENABLE_PIN P2_07 // FET 1 #define SPINDLE_LASER_ENABLE_PIN P2_07 // FET 1
#undef HEATER_BED_PIN #undef HEATER_BED_PIN
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#undef FAN_PIN #undef FAN_PIN
#define SPINDLE_DIR_PIN P2_06 // ReMix FET 4, Mini FET 3 #define SPINDLE_DIR_PIN P2_06 // ReMix FET 4, Mini FET 3
#endif #endif
// //
@ -159,19 +159,19 @@
// //
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN P1_31 // EXP1-1 #define BEEPER_PIN P1_31 // EXP1-1
#define SD_DETECT_PIN P0_27 // EXP2-7 #define SD_DETECT_PIN P0_27 // EXP2-7
#define BTN_EN1 P3_26 // EXP2-5 #define BTN_EN1 P3_26 // EXP2-5
#define BTN_EN2 P3_25 // EXP2-3 #define BTN_EN2 P3_25 // EXP2-3
#define BTN_ENC P1_30 // EXP1-2 #define BTN_ENC P1_30 // EXP1-2
#define LCD_PINS_RS P0_16 // EXP1-4 #define LCD_PINS_RS P0_16 // EXP1-4
#define LCD_SDSS P0_28 // EXP2-4 #define LCD_SDSS P0_28 // EXP2-4
#define LCD_PINS_ENABLE P0_18 // EXP1-3 #define LCD_PINS_ENABLE P0_18 // EXP1-3
#define LCD_PINS_D4 P0_15 // EXP1-5 #define LCD_PINS_D4 P0_15 // EXP1-5
#define KILL_PIN P2_11 // EXP2-10 #define KILL_PIN P2_11 // EXP2-10
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#error "SDSUPPORT is not currently supported by the Cohesion3D boards" #error "SDSUPPORT is not currently supported by the Cohesion3D boards"

36
Marlin/src/pins/pins_DUE3DOM.h
Unescape Escape View File

@ -59,21 +59,21 @@
#define Y_DIR_PIN 16 #define Y_DIR_PIN 16
#define Y_ENABLE_PIN 26 #define Y_ENABLE_PIN 26
#define Z_STEP_PIN 61 // Z1 STP #define Z_STEP_PIN 61 // Z1 STP
#define Z_DIR_PIN 60 // Z1 DIR #define Z_DIR_PIN 60 // Z1 DIR
#define Z_ENABLE_PIN 15 // Z1 ENA #define Z_ENABLE_PIN 15 // Z1 ENA
#define E0_STEP_PIN 64 // Z2 STP #define E0_STEP_PIN 64 // Z2 STP
#define E0_DIR_PIN 63 // Z2 DIR #define E0_DIR_PIN 63 // Z2 DIR
#define E0_ENABLE_PIN 62 // Z2 ENA #define E0_ENABLE_PIN 62 // Z2 ENA
#define E1_STEP_PIN 51 // E1 STP #define E1_STEP_PIN 51 // E1 STP
#define E1_DIR_PIN 53 // E1 DIR #define E1_DIR_PIN 53 // E1 DIR
#define E1_ENABLE_PIN 65 // E1 ENA #define E1_ENABLE_PIN 65 // E1 ENA
#define E2_STEP_PIN 24 // E2 STP #define E2_STEP_PIN 24 // E2 STP
#define E2_DIR_PIN 23 // E2 DIR #define E2_DIR_PIN 23 // E2 DIR
#define E2_ENABLE_PIN 49 // E2 ENA #define E2_ENABLE_PIN 49 // E2 ENA
// //
// Temperature Sensors // Temperature Sensors
@ -93,13 +93,13 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 7 // HOTEND0 MOSFET #define HEATER_0_PIN 7 // HOTEND0 MOSFET
#define HEATER_1_PIN 8 // HOTEND1 MOSFET #define HEATER_1_PIN 8 // HOTEND1 MOSFET
#define HEATER_BED_PIN 39 // BED MOSFET #define HEATER_BED_PIN 39 // BED MOSFET
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN #define FAN_PIN 11 // FAN1 header on board - PRINT FAN
#define FAN1_PIN 9 // FAN2 header on board - CONTROLLER FAN #define FAN1_PIN 9 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN 12 // FAN3 header on board - EXTRUDER0 FAN #define FAN2_PIN 12 // FAN3 header on board - EXTRUDER0 FAN
// //
// Misc. Functions // Misc. Functions

14
Marlin/src/pins/pins_DUE3DOM_MINI.h
Unescape Escape View File

@ -35,7 +35,7 @@
// //
#define SERVO0_PIN 5 #define SERVO0_PIN 5
#define SERVO1_PIN 6 #define SERVO1_PIN 6
#define SERVO2_PIN 8 // 4-pin header FAN0 #define SERVO2_PIN 8 // 4-pin header FAN0
#define SERVO3_PIN -1 #define SERVO3_PIN -1
// //
@ -85,13 +85,13 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 13 // HOTEND0 MOSFET #define HEATER_0_PIN 13 // HOTEND0 MOSFET
#define HEATER_BED_PIN 7 // BED MOSFET #define HEATER_BED_PIN 7 // BED MOSFET
#define FAN_PIN 11 // FAN1 header on board - PRINT FAN #define FAN_PIN 11 // FAN1 header on board - PRINT FAN
#define FAN1_PIN 12 // FAN2 header on board - CONTROLLER FAN #define FAN1_PIN 12 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN 9 // FAN3 header on board - EXTRUDER0 FAN #define FAN2_PIN 9 // FAN3 header on board - EXTRUDER0 FAN
//#define FAN3_PIN 8 // FAN0 4-pin header on board //#define FAN3_PIN 8 // FAN0 4-pin header on board
// //
// Misc. Functions // Misc. Functions

14
Marlin/src/pins/pins_EINSY_RAMBO.h
Unescape Escape View File

@ -71,8 +71,8 @@
#define Y_MIN_PIN Y_DIAG_PIN #define Y_MIN_PIN Y_DIAG_PIN
#if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH)
#define Z_MIN_PIN 11 // Y-MIN #define Z_MIN_PIN 11 // Y-MIN
#define SERVO0_PIN 10 // Z-MIN #define SERVO0_PIN 10 // Z-MIN
#else #else
#define Z_MIN_PIN 10 #define Z_MIN_PIN 10
#endif #endif
@ -152,8 +152,8 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
// use P1 connector for spindle pins // use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 19 #define SPINDLE_DIR_PIN 19
// //
@ -161,7 +161,7 @@
// //
#define E_MUX0_PIN 17 #define E_MUX0_PIN 17
#define E_MUX1_PIN 16 #define E_MUX1_PIN 16
#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 #define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78
// //
// LCD / Controller // LCD / Controller
@ -189,8 +189,8 @@
#define BTN_EN2 72 #define BTN_EN2 72
#endif #endif
#define BTN_ENC 9 // AUX-2 #define BTN_ENC 9 // AUX-2
#define BEEPER_PIN 84 // AUX-4 #define BEEPER_PIN 84 // AUX-4
#define SD_DETECT_PIN 15 #define SD_DETECT_PIN 15
#endif // NEWPANEL #endif // NEWPANEL

42
Marlin/src/pins/pins_ELEFU_3.h
Unescape Escape View File

@ -85,18 +85,18 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 45 // 12V PWM1 #define HEATER_0_PIN 45 // 12V PWM1
#define HEATER_1_PIN 46 // 12V PWM2 #define HEATER_1_PIN 46 // 12V PWM2
#define HEATER_2_PIN 17 // 12V PWM3 #define HEATER_2_PIN 17 // 12V PWM3
#define HEATER_BED_PIN 44 // DOUBLE 12V PWM #define HEATER_BED_PIN 44 // DOUBLE 12V PWM
#define FAN_PIN 16 // 5V PWM #define FAN_PIN 16 // 5V PWM
// //
// Misc. Functions // Misc. Functions
// //
#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector #define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector
#define SLEEP_WAKE_PIN 26 // This feature still needs work #define SLEEP_WAKE_PIN 26 // This feature still needs work
#define PHOTOGRAPH_PIN 29 #define PHOTOGRAPH_PIN 29
// //
@ -122,28 +122,28 @@
#define TLC_XLAT_PIN 22 #define TLC_XLAT_PIN 22
#define TLC_DATA_PIN 24 #define TLC_DATA_PIN 24
// We also need to define pin to port number mapping for the 2560 to match the pins listed above. If you change the TLC pins, update this as well per the 2560 datasheet! // We also need to define pin to port number mapping for the 2560 to match the pins listed above.
// This currently only works with the RA Board. // If you change the TLC pins, update this as well per the 2560 datasheet! This currently only works with the RA Board.
#define TLC_CLOCK_BIT 3 // bit 3 on port A #define TLC_CLOCK_BIT 3
#define TLC_CLOCK_PORT &PORTA // bit 3 on port A #define TLC_CLOCK_PORT &PORTA
#define TLC_BLANK_BIT 1 // bit 1 on port A #define TLC_BLANK_BIT 1
#define TLC_BLANK_PORT &PORTA // bit 1 on port A #define TLC_BLANK_PORT &PORTA
#define TLC_DATA_BIT 2 // bit 2 on port A #define TLC_DATA_BIT 2
#define TLC_DATA_PORT &PORTA // bit 2 on port A #define TLC_DATA_PORT &PORTA
#define TLC_XLAT_BIT 0 // bit 0 on port A #define TLC_XLAT_BIT 0
#define TLC_XLAT_PORT &PORTA // bit 0 on port A #define TLC_XLAT_PORT &PORTA
// change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful // Change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful
// Leave it at at least 1 if you have enabled RA_LIGHTING // Leave it at at least 1 if you have enabled RA_LIGHTING
// The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module. // The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module.
#define NUM_TLCS 2 #define NUM_TLCS 2
// These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions. // These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions.
// Modify them according to your specific situation. // Modify them according to your specific situation.
// NOTE: the array should be 8 long for every TLC you have. These defaults assume (2) TLCs. // NOTE: the array should be 8 long for every TLC you have. These defaults assume (2) TLCs.
#define TRANS_ARRAY {0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8} //forwards #define TRANS_ARRAY { 0, 1, 2, 3, 4, 5, 6, 7, 15, 14, 13, 12, 11, 10, 9, 8 } // forward
//#define TRANS_ARRAY {7, 6, 5, 4, 3, 2, 1, 0, 8, 9, 10, 11, 12, 13, 14, 15} //backwards //#define TRANS_ARRAY { 7, 6, 5, 4, 3, 2, 1, 0, 8, 9, 10, 11, 12, 13, 14, 15 } // backward
#endif // RA_DISCO #endif // RA_DISCO

7
Marlin/src/pins/pins_GEN3_MONOLITHIC.h
Unescape Escape View File

@ -68,11 +68,11 @@
// //
#define X_STEP_PIN 15 #define X_STEP_PIN 15
#define X_DIR_PIN 18 #define X_DIR_PIN 18
#define X_ENABLE_PIN 24 // actually uses Y_enable_pin #define X_ENABLE_PIN 24 // actually uses Y_enable_pin
#define Y_STEP_PIN 23 #define Y_STEP_PIN 23
#define Y_DIR_PIN 22 #define Y_DIR_PIN 22
#define Y_ENABLE_PIN 24 // shared with X_enable_pin #define Y_ENABLE_PIN 24 // shared with X_enable_pin
#define Z_STEP_PIN 27 #define Z_STEP_PIN 27
#define Z_DIR_PIN 28 #define Z_DIR_PIN 28
@ -95,7 +95,6 @@
// //
// Misc. Functions // Misc. Functions
// //
#define PS_ON_PIN 14 // Alex, does this work on the card? #define PS_ON_PIN 14 // Alex, does this work on the card?
// Alex extras from Gen3+ // Alex extras from Gen3+

12
Marlin/src/pins/pins_GEN7_12.h
Unescape Escape View File

@ -60,7 +60,7 @@
#endif #endif
#ifndef GEN7_VERSION #ifndef GEN7_VERSION
#define GEN7_VERSION 12 // v1.x #define GEN7_VERSION 12 // v1.x
#endif #endif
// //
@ -122,9 +122,9 @@
#define PS_ON_PIN 15 #define PS_ON_PIN 15
#if GEN7_VERSION < 13 #if GEN7_VERSION < 13
#define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 16 // MUST BE HARDWARE PWM
#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header #else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header
#define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 15 // MUST BE HARDWARE PWM
#endif #endif
// All these generations of Gen7 supply thermistor power // All these generations of Gen7 supply thermistor power
@ -140,10 +140,10 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup/pulldown!
#define SPINDLE_DIR_PIN 11 #define SPINDLE_DIR_PIN 11
#if GEN7_VERSION < 13 #if GEN7_VERSION < 13
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header #else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header
#define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM
#endif #endif

2
Marlin/src/pins/pins_GEN7_13.h
Unescape Escape View File

@ -51,5 +51,5 @@
#define BOARD_NAME "Gen7 v1.3" #define BOARD_NAME "Gen7 v1.3"
#define GEN7_VERSION 13 // v1.3 #define GEN7_VERSION 13 // v1.3
#include "pins_GEN7_12.h" #include "pins_GEN7_12.h"

6
Marlin/src/pins/pins_GEN7_14.h
Unescape Escape View File

@ -57,7 +57,7 @@
#define BOARD_NAME "Gen7 v1.4" #define BOARD_NAME "Gen7 v1.4"
#define GEN7_VERSION 14 // v1.4 #define GEN7_VERSION 14 // v1.4
// //
// Limit switches // Limit switches
@ -113,6 +113,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 21 #define SPINDLE_DIR_PIN 21

4
Marlin/src/pins/pins_GEN7_CUSTOM.h
Unescape Escape View File

@ -133,6 +133,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 6 #define SPINDLE_DIR_PIN 6

2
Marlin/src/pins/pins_GT2560_REV_A.h
Unescape Escape View File

@ -90,7 +90,7 @@
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing #define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing
#define KILL_PIN -1 #define KILL_PIN -1
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)

28
Marlin/src/pins/pins_LEAPFROG.h
Unescape Escape View File

@ -47,21 +47,21 @@
#define X_DIR_PIN 63 #define X_DIR_PIN 63
#define X_ENABLE_PIN 29 #define X_ENABLE_PIN 29
#define Y_STEP_PIN 14 // A6 #define Y_STEP_PIN 14 // A6
#define Y_DIR_PIN 15 // A0 #define Y_DIR_PIN 15 // A0
#define Y_ENABLE_PIN 39 #define Y_ENABLE_PIN 39
#define Z_STEP_PIN 31 // A2 #define Z_STEP_PIN 31 // A2
#define Z_DIR_PIN 32 // A6 #define Z_DIR_PIN 32 // A6
#define Z_ENABLE_PIN 30 // A1 #define Z_ENABLE_PIN 30 // A1
#define E0_STEP_PIN 34 // 34 #define E0_STEP_PIN 34 // 34
#define E0_DIR_PIN 35 // 35 #define E0_DIR_PIN 35 // 35
#define E0_ENABLE_PIN 33 // 33 #define E0_ENABLE_PIN 33 // 33
#define E1_STEP_PIN 37 // 37 #define E1_STEP_PIN 37 // 37
#define E1_DIR_PIN 40 // 40 #define E1_DIR_PIN 40 // 40
#define E1_ENABLE_PIN 36 // 36 #define E1_ENABLE_PIN 36 // 36
// //
// Temperature Sensors // Temperature Sensors
@ -74,9 +74,9 @@
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 9 #define HEATER_0_PIN 9
#define HEATER_1_PIN 8 // 12 #define HEATER_1_PIN 8 // 12
#define HEATER_2_PIN 11 // 13 #define HEATER_2_PIN 11 // 13
#define HEATER_BED_PIN 10 // 14/15 #define HEATER_BED_PIN 10 // 14/15
#define FAN_PIN 7 #define FAN_PIN 7

10
Marlin/src/pins/pins_MALYAN_M200.h
Unescape Escape View File

@ -73,8 +73,8 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN PB6 // HOTEND0 MOSFET #define HEATER_0_PIN PB6 // HOTEND0 MOSFET
#define HEATER_BED_PIN PB7 // BED MOSFET #define HEATER_BED_PIN PB7 // BED MOSFET
// This board has only the controller fan and the extruder fan // This board has only the controller fan and the extruder fan
// If someone hacks to put a direct power fan on the controller, PB3 could // If someone hacks to put a direct power fan on the controller, PB3 could
@ -83,6 +83,6 @@
// FAN_PIN is commented out here because the M200 example // FAN_PIN is commented out here because the M200 example
// Configuration_adv.h does NOT override E0_AUTO_FAN_PIN. // Configuration_adv.h does NOT override E0_AUTO_FAN_PIN.
//#define FAN_PIN PB8 // FAN1 header on board - PRINT FAN //#define FAN_PIN PB8 // FAN1 header on board - PRINT FAN
#define FAN1_PIN PB3 // FAN2 header on board - CONTROLLER FAN #define FAN1_PIN PB3 // FAN2 header on board - CONTROLLER FAN
#define FAN2_PIN -1 // FAN3 header on board - EXTRUDER0 FAN #define FAN2_PIN -1 // FAN3 header on board - EXTRUDER0 FAN

24
Marlin/src/pins/pins_MEGACONTROLLER.h
Unescape Escape View File

@ -62,17 +62,17 @@
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 62 // A8 #define X_STEP_PIN 62 // A8
#define X_DIR_PIN 63 // A9 #define X_DIR_PIN 63 // A9
#define X_ENABLE_PIN 61 // A7 #define X_ENABLE_PIN 61 // A7
#define Y_STEP_PIN 65 // A11 #define Y_STEP_PIN 65 // A11
#define Y_DIR_PIN 66 // A12 #define Y_DIR_PIN 66 // A12
#define Y_ENABLE_PIN 64 // A10 #define Y_ENABLE_PIN 64 // A10
#define Z_STEP_PIN 68 // A14 #define Z_STEP_PIN 68 // A14
#define Z_DIR_PIN 69 // A15 #define Z_DIR_PIN 69 // A15
#define Z_ENABLE_PIN 67 // A13 #define Z_ENABLE_PIN 67 // A13
#define E0_STEP_PIN 23 #define E0_STEP_PIN 23
#define E0_DIR_PIN 24 #define E0_DIR_PIN 24
@ -138,7 +138,7 @@
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 47 #define DOGLCD_A0 47
#define DOGLCD_CS 45 #define DOGLCD_CS 45
#define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3 #define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3
#define KILL_PIN 12 #define KILL_PIN 12
// GLCD features // GLCD features
@ -159,6 +159,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 7 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 7 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 8 #define SPINDLE_DIR_PIN 8

14
Marlin/src/pins/pins_MEGATRONICS.h
Unescape Escape View File

@ -53,13 +53,13 @@
#define X_DIR_PIN 28 #define X_DIR_PIN 28
#define X_ENABLE_PIN 24 #define X_ENABLE_PIN 24
#define Y_STEP_PIN 60 // A6 #define Y_STEP_PIN 60 // A6
#define Y_DIR_PIN 61 // A7 #define Y_DIR_PIN 61 // A7
#define Y_ENABLE_PIN 22 #define Y_ENABLE_PIN 22
#define Z_STEP_PIN 54 // A0 #define Z_STEP_PIN 54 // A0
#define Z_DIR_PIN 55 // A1 #define Z_DIR_PIN 55 // A1
#define Z_ENABLE_PIN 56 // A2 #define Z_ENABLE_PIN 56 // A2
#define E0_STEP_PIN 31 #define E0_STEP_PIN 31
#define E0_DIR_PIN 32 #define E0_DIR_PIN 32
@ -123,6 +123,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 11 #define SPINDLE_DIR_PIN 11

20
Marlin/src/pins/pins_MEGATRONICS_2.h
Unescape Escape View File

@ -53,13 +53,13 @@
#define X_DIR_PIN 27 #define X_DIR_PIN 27
#define X_ENABLE_PIN 25 #define X_ENABLE_PIN 25
#define Y_STEP_PIN 4 // A6 #define Y_STEP_PIN 4 // A6
#define Y_DIR_PIN 54 // A0 #define Y_DIR_PIN 54 // A0
#define Y_ENABLE_PIN 5 #define Y_ENABLE_PIN 5
#define Z_STEP_PIN 56 // A2 #define Z_STEP_PIN 56 // A2
#define Z_DIR_PIN 60 // A6 #define Z_DIR_PIN 60 // A6
#define Z_ENABLE_PIN 55 // A1 #define Z_ENABLE_PIN 55 // A1
#define E0_STEP_PIN 35 #define E0_STEP_PIN 35
#define E0_DIR_PIN 36 #define E0_DIR_PIN 36
@ -69,8 +69,8 @@
#define E1_DIR_PIN 39 #define E1_DIR_PIN 39
#define E1_ENABLE_PIN 28 #define E1_ENABLE_PIN 28
#define E2_STEP_PIN 23 // ? schematic says 24 #define E2_STEP_PIN 23 // ? schematic says 24
#define E2_DIR_PIN 24 // ? schematic says 23 #define E2_DIR_PIN 24 // ? schematic says 23
#define E2_ENABLE_PIN 22 #define E2_ENABLE_PIN 22
// //
@ -138,6 +138,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 16 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 16 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 11 #define SPINDLE_DIR_PIN 11

18
Marlin/src/pins/pins_MEGATRONICS_3.h
Unescape Escape View File

@ -37,10 +37,10 @@
// //
// Servos // Servos
// //
#define SERVO0_PIN 46 // AUX3-6 #define SERVO0_PIN 46 // AUX3-6
#define SERVO1_PIN 47 // AUX3-5 #define SERVO1_PIN 47 // AUX3-5
#define SERVO2_PIN 48 // AUX3-4 #define SERVO2_PIN 48 // AUX3-4
#define SERVO3_PIN 49 // AUX3-3 #define SERVO3_PIN 49 // AUX3-3
// //
// Limit Switches // Limit Switches
@ -168,9 +168,9 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first #if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 43 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 43 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 42 #define SPINDLE_DIR_PIN 42
#elif EXTRUDERS <= 2 #elif EXTRUDERS <= 2
// Hijack the last extruder so that we can get the PWM signal off the Y breakout // Hijack the last extruder so that we can get the PWM signal off the Y breakout
@ -184,7 +184,7 @@
#define Y_ENABLE_PIN 23 #define Y_ENABLE_PIN 23
#define Y_STEP_PIN 22 #define Y_STEP_PIN 22
#define Y_DIR_PIN 60 #define Y_DIR_PIN 60
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 5 #define SPINDLE_DIR_PIN 5
#endif #endif

10
Marlin/src/pins/pins_MELZI_CREALITY.h
Unescape Escape View File

@ -47,11 +47,11 @@
#undef LCD_PINS_D7 #undef LCD_PINS_D7
#undef FIL_RUNOUT_PIN #undef FIL_RUNOUT_PIN
#define LCD_SDSS 31 // Smart Controller SD card reader (rather than the Melzi) #define LCD_SDSS 31 // Smart Controller SD card reader (rather than the Melzi)
#define LCD_PINS_RS 28 // st9720 CS #define LCD_PINS_RS 28 // ST9720 CS
#define LCD_PINS_ENABLE 17 // st9720 DAT #define LCD_PINS_ENABLE 17 // ST9720 DAT
#define LCD_PINS_D4 30 // st9720 CLK #define LCD_PINS_D4 30 // ST9720 CLK
#define FIL_RUNOUT_PIN -1 // Uses Beeper/LED Pin Pulled to GND #define FIL_RUNOUT_PIN -1 // Uses Beeper/LED Pin Pulled to GND
// Alter timing for graphical display // Alter timing for graphical display
#ifndef ST7920_DELAY_1 #ifndef ST7920_DELAY_1

12
Marlin/src/pins/pins_MELZI_MALYAN.h
Unescape Escape View File

@ -35,12 +35,12 @@
#undef BTN_EN2 #undef BTN_EN2
#undef BTN_ENC #undef BTN_ENC
#define LCD_PINS_RS 17 // st9720 CS #define LCD_PINS_RS 17 // ST9720 CS
#define LCD_PINS_ENABLE 16 // st9720 DAT #define LCD_PINS_ENABLE 16 // ST9720 DAT
#define LCD_PINS_D4 11 // st9720 CLK #define LCD_PINS_D4 11 // ST9720 CLK
#define BTN_EN1 30 #define BTN_EN1 30
#define BTN_EN2 29 #define BTN_EN2 29
#define BTN_ENC 28 #define BTN_ENC 28
// Alter timing for graphical display // Alter timing for graphical display
#ifndef ST7920_DELAY_1 #ifndef ST7920_DELAY_1

92
Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
Unescape Escape View File

@ -119,7 +119,7 @@
#define DIGIPOTS_I2C_SDA_Z 65 // K3 #define DIGIPOTS_I2C_SDA_Z 65 // K3
#define DIGIPOTS_I2C_SDA_E0 27 // A5 #define DIGIPOTS_I2C_SDA_E0 27 // A5
#define DIGIPOTS_I2C_SDA_E1 77 // J6 #define DIGIPOTS_I2C_SDA_E1 77 // J6
#define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1)
// //
// Temperature Sensors // Temperature Sensors
@ -134,14 +134,14 @@
// 2 E4 CS2 // 2 E4 CS2
// 78 E2 SCK // 78 E2 SCK
// //
#define THERMO_SCK_PIN 78 // E2 #define THERMO_SCK_PIN 78 // E2
#define THERMO_DO_PIN 3 // E5 #define THERMO_DO_PIN 3 // E5
#define THERMO_CS1 5 // E3 #define THERMO_CS1 5 // E3
#define THERMO_CS2 2 // E4 #define THERMO_CS2 2 // E4
#define MAX6675_SS THERMO_CS1 #define MAX6675_SS THERMO_CS1
#define MAX6675_SCK_PIN THERMO_SCK_PIN #define MAX6675_SCK_PIN THERMO_SCK_PIN
#define MAX6675_DO_PIN THERMO_DO_PIN #define MAX6675_DO_PIN THERMO_DO_PIN
// //
// Augmentation for auto-assigning plugs // Augmentation for auto-assigning plugs
// //
@ -149,10 +149,10 @@
// 2 extruders or 1 extruder and a heated bed. // 2 extruders or 1 extruder and a heated bed.
// With no heated bed, an additional 24V fan is possible. // With no heated bed, an additional 24V fan is possible.
// //
#define MOSFET_A_PIN 6 // H3 #define MOSFET_A_PIN 6 // H3
#define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9 #define MOSFET_B_PIN 11 // B5 - Rev A of this file had this pin assigned to 9
#define MOSFET_C_PIN 45 // L4 #define MOSFET_C_PIN 45 // L4
#define MOSFET_D_PIN 44 // L5 #define MOSFET_D_PIN 44 // L5
#if HOTENDS > 1 #if HOTENDS > 1
#if TEMP_SENSOR_BED #if TEMP_SENSOR_BED
@ -200,37 +200,37 @@
// //
// Misc. Functions // Misc. Functions
// //
#define LED_PIN 13 // B7 #define LED_PIN 13 // B7
#define CUTOFF_RESET_PIN 16 // H1 #define CUTOFF_RESET_PIN 16 // H1
#define CUTOFF_TEST_PIN 17 // H0 #define CUTOFF_TEST_PIN 17 // H0
#define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // L5 MUST BE HARDWARE PWM
// //
// LCD / Controller // LCD / Controller
// //
#ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER #ifdef REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#define LCD_PINS_RS 33 // C4: LCD-STROBE #define LCD_PINS_RS 33 // C4: LCD-STROBE
#define LCD_PINS_ENABLE 72 // J2: LEFT #define LCD_PINS_ENABLE 72 // J2: LEFT
#define LCD_PINS_D4 35 // C2: LCD-CLK #define LCD_PINS_D4 35 // C2: LCD-CLK
#define LCD_PINS_D5 32 // C5: RLED #define LCD_PINS_D5 32 // C5: RLED
#define LCD_PINS_D6 34 // C3: LCD-DATA #define LCD_PINS_D6 34 // C3: LCD-DATA
#define LCD_PINS_D7 31 // C6: GLED #define LCD_PINS_D7 31 // C6: GLED
#define BTN_EN2 75 // J4, UP #define BTN_EN2 75 // J4, UP
#define BTN_EN1 73 // J3, DOWN #define BTN_EN1 73 // J3, DOWN
//STOP button connected as KILL_PIN //STOP button connected as KILL_PIN
#define KILL_PIN 14 // J1, RIGHT #define KILL_PIN 14 // J1, RIGHT
//KILL - not connected //KILL - not connected
#define BEEPER_PIN 8 // H5, SD_WP #define BEEPER_PIN 8 // H5, SD_WP
#define BTN_CENTER 15 // J0 #define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER #define BTN_ENC BTN_CENTER
//on board leds //on board leds
#define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2) #define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2)
#define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3) #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3)
#else #else
// Replicator uses a 3-wire SR controller with HD44780 // Replicator uses a 3-wire SR controller with HD44780
@ -238,18 +238,18 @@
// //
#define SAV_3DLCD #define SAV_3DLCD
#define SR_DATA_PIN 34 // C3 #define SR_DATA_PIN 34 // C3
#define SR_CLK_PIN 35 // C2 #define SR_CLK_PIN 35 // C2
#define SR_STROBE_PIN 33 // C4 #define SR_STROBE_PIN 33 // C4
#define BTN_UP 75 // J4 #define BTN_UP 75 // J4
#define BTN_DOWN 73 // J3 #define BTN_DOWN 73 // J3
#define BTN_LEFT 72 // J2 #define BTN_LEFT 72 // J2
#define BTN_RIGHT 14 // J1 #define BTN_RIGHT 14 // J1
#define BTN_CENTER 15 // J0 #define BTN_CENTER 15 // J0
#define BTN_ENC BTN_CENTER #define BTN_ENC BTN_CENTER
#define BEEPER_PIN 4 // G5 #define BEEPER_PIN 4 // G5
#define STAT_LED_RED_PIN 32 // C5 #define STAT_LED_RED_PIN 32 // C5
#define STAT_LED_BLUE_PIN 31 // C6 (Actually green) #define STAT_LED_BLUE_PIN 31 // C6 (Actually green)
@ -259,19 +259,17 @@
// //
// SD Card // SD Card
// //
#define SDSS 53 // B0 #define SDSS 53 // B0
#define SD_DETECT_PIN 9 // H6 #define SD_DETECT_PIN 9 // H6
#define MAX_PIN THERMO_SCK_PIN #define MAX_PIN THERMO_SCK_PIN
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 66 // K4 Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 66 // K4 Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 8 // H5 MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 8 // H5 MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 67 // K5 #define SPINDLE_DIR_PIN 67 // K5
// Check if all pins are defined in mega/pins_arduino.h // Check if all pins are defined in mega/pins_arduino.h

4
Marlin/src/pins/pins_MINIRAMBO.h
Unescape Escape View File

@ -122,8 +122,8 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
// use P1 connector for spindle pins // use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 19 #define SPINDLE_DIR_PIN 19
// //

30
Marlin/src/pins/pins_MINITRONICS.h
Unescape Escape View File

@ -57,13 +57,13 @@
#define X_DIR_PIN 47 #define X_DIR_PIN 47
#define X_ENABLE_PIN 49 #define X_ENABLE_PIN 49
#define Y_STEP_PIN 39 // A6 #define Y_STEP_PIN 39 // A6
#define Y_DIR_PIN 40 // A0 #define Y_DIR_PIN 40 // A0
#define Y_ENABLE_PIN 38 #define Y_ENABLE_PIN 38
#define Z_STEP_PIN 42 // A2 #define Z_STEP_PIN 42 // A2
#define Z_DIR_PIN 43 // A6 #define Z_DIR_PIN 43 // A6
#define Z_ENABLE_PIN 41 // A1 #define Z_ENABLE_PIN 41 // A1
#define E0_STEP_PIN 45 #define E0_STEP_PIN 45
#define E0_DIR_PIN 44 #define E0_DIR_PIN 44
@ -83,9 +83,9 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 7 // EXTRUDER 1 #define HEATER_0_PIN 7 // EXTRUDER 1
#define HEATER_1_PIN 8 // EXTRUDER 2 #define HEATER_1_PIN 8 // EXTRUDER 2
#define HEATER_BED_PIN 3 // BED #define HEATER_BED_PIN 3 // BED
#define FAN_PIN 9 #define FAN_PIN 9
@ -122,7 +122,7 @@
#define BTN_EN2 -1 #define BTN_EN2 -1
#define BTN_ENC -1 #define BTN_ENC -1
#define SD_DETECT_PIN -1 // Minitronics doesn't use this #define SD_DETECT_PIN -1 // Minitronics doesn't use this
#endif #endif
// //
@ -130,13 +130,13 @@
// //
#if ENABLED(SPINDLE_LASER_ENABLE) // assumes we're only doing CNC work (no 3D printing) #if ENABLED(SPINDLE_LASER_ENABLE) // assumes we're only doing CNC work (no 3D printing)
#undef HEATER_BED_PIN #undef HEATER_BED_PIN
#undef TEMP_BED_PIN // need to free up some pins but also need to #undef TEMP_BED_PIN // need to free up some pins but also need to
#undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin #undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin
#undef TEMP_1_PIN // requires the presence of certain pins or else it #undef TEMP_1_PIN // requires the presence of certain pins or else it
#define HEATER_BED_PIN 4 // won't compile #define HEATER_BED_PIN 4 // won't compile
#define TEMP_BED_PIN 50 #define TEMP_BED_PIN 50
#define TEMP_0_PIN 51 #define TEMP_0_PIN 51
#define SPINDLE_LASER_ENABLE_PIN 52 // using A6 because it already has a pull up on it #define SPINDLE_LASER_ENABLE_PIN 52 // using A6 because it already has a pullup
#define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage #define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage
#define SPINDLE_DIR_PIN 53 #define SPINDLE_DIR_PIN 53
#endif #endif

4
Marlin/src/pins/pins_MKS_BASE.h
Unescape Escape View File

@ -43,8 +43,8 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 2 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 2 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 15 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 15 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 19 #define SPINDLE_DIR_PIN 19
#include "pins_RAMPS.h" #include "pins_RAMPS.h"

20
Marlin/src/pins/pins_MKS_BASE_HEROIC.h
Unescape Escape View File

@ -34,13 +34,13 @@
* the A4982 is doing quarter steps (MS1=L / MS2=H). * the A4982 is doing quarter steps (MS1=L / MS2=H).
*/ */
#define HEROIC_STEPPER_DRIVERS #define HEROIC_STEPPER_DRIVERS
#define X_MS1_PIN 5 // Digital 3 / Pin 5 / PE3 / SERVO2_PIN #define X_MS1_PIN 5 // Digital 3 / Pin 5 / PE3 / SERVO2_PIN
#define X_MS2_PIN 6 // Digital 6 / Pin 14 / PH3 / SERVO1_PIN #define X_MS2_PIN 6 // Digital 6 / Pin 14 / PH3 / SERVO1_PIN
#define Y_MS1_PIN 59 // Analog 5 / Pin 92 / PF5 #define Y_MS1_PIN 59 // Analog 5 / Pin 92 / PF5
#define Y_MS2_PIN 58 // Analog 4 / Pin 93 / PF4 #define Y_MS2_PIN 58 // Analog 4 / Pin 93 / PF4
#define Z_MS1_PIN 22 // Digital 22 / Pin 78 / PA0 #define Z_MS1_PIN 22 // Digital 22 / Pin 78 / PA0
#define Z_MS2_PIN 39 // Digital 39 / Pin 70 / PG2 #define Z_MS2_PIN 39 // Digital 39 / Pin 70 / PG2
#define E0_MS1_PIN 63 // Analog 9 / Pin 86 / PK1 #define E0_MS1_PIN 63 // Analog 9 / Pin 86 / PK1
#define E0_MS2_PIN 64 // Analog 10 / Pin 87 / PK2 #define E0_MS2_PIN 64 // Analog 10 / Pin 87 / PK2
#define E1_MS1_PIN 57 // Analog 3 / Pin 93 / PF3 #define E1_MS1_PIN 57 // Analog 3 / Pin 93 / PF3
#define E1_MS2_PIN 4 // Digital 4 / Pin 1 / PG5 / SERVO3_PIN #define E1_MS2_PIN 4 // Digital 4 / Pin 1 / PG5 / SERVO3_PIN

72
Marlin/src/pins/pins_MKS_SBASE.h
Unescape Escape View File

@ -44,20 +44,20 @@
// //
// Servo pin // Servo pin
// //
#define SERVO0_PIN P1_23 // J8-3 (low jitter) #define SERVO0_PIN P1_23 // J8-3 (low jitter)
#define SERVO1_PIN P2_12 // J8-4 #define SERVO1_PIN P2_12 // J8-4
#define SERVO2_PIN P2_11 // J8-5 #define SERVO2_PIN P2_11 // J8-5
#define SERVO3_PIN P4_28 // J8-6 #define SERVO3_PIN P4_28 // J8-6
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN P1_24 //10k pullup to 3.3V, 1K series #define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 //10k pullup to 3.3V, 1K series #define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 //10k pullup to 3.3V, 1K series #define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 //10k pullup to 3.3V, 1K series #define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_28 //The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22) #define Z_MIN_PIN P1_28 // The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22)
#define Z_MAX_PIN P1_29 //10k pullup to 3.3V, 1K series #define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
// //
// Steppers // Steppers
@ -87,10 +87,10 @@
// 3.3V max when defined as an analog input // 3.3V max when defined as an analog input
// //
#define TEMP_BED_PIN 0 // A0 (TH1) #define TEMP_BED_PIN 0 // A0 (TH1)
#define TEMP_0_PIN 1 // A1 (TH2) #define TEMP_0_PIN 1 // A1 (TH2)
#define TEMP_1_PIN 2 // A2 (TH3) #define TEMP_1_PIN 2 // A2 (TH3)
#define TEMP_2_PIN 3 // A3 (TH4) #define TEMP_2_PIN 3 // A3 (TH4)
// //
@ -154,32 +154,32 @@
*/ */
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN P1_31 // EXP1.1 #define BEEPER_PIN P1_31 // EXP1.1
#define BTN_ENC P1_30 // EXP1.2 #define BTN_ENC P1_30 // EXP1.2
#define BTN_EN1 P3_26 // EXP2.5 #define BTN_EN1 P3_26 // EXP2.5
#define BTN_EN2 P3_25 // EXP2.3 #define BTN_EN2 P3_25 // EXP2.3
#define SD_DETECT_PIN P0_27 // EXP2.7 #define SD_DETECT_PIN P0_27 // EXP2.7
#define LCD_PINS_RS P0_16 // EXP1.4 #define LCD_PINS_RS P0_16 // EXP1.4
#define LCD_SDSS P0_28 // EXP2.4 #define LCD_SDSS P0_28 // EXP2.4
#define LCD_PINS_ENABLE P0_18 // EXP1.3 #define LCD_PINS_ENABLE P0_18 // EXP1.3
#define LCD_PINS_D4 P0_15 // EXP1.5 #define LCD_PINS_D4 P0_15 // EXP1.5
#endif // ULTRA_LCD #endif // ULTRA_LCD
// //
// Ethernet pins // Ethernet pins
// //
#ifndef ULTIPANEL #ifndef ULTIPANEL
#define ENET_MDIO P1_17 // J12-4 #define ENET_MDIO P1_17 // J12-4
#define ENET_RX_ER P1_14 // J12-6 #define ENET_RX_ER P1_14 // J12-6
#define ENET_RXD1 P1_10 // J12-8 #define ENET_RXD1 P1_10 // J12-8
#endif #endif
#define ENET_MOC P1_16 // J12-3 #define ENET_MOC P1_16 // J12-3
#define REF_CLK P1_15 // J12-5 #define REF_CLK P1_15 // J12-5
#define ENET_RXD0 P1_09 // J12-7 #define ENET_RXD0 P1_09 // J12-7
#define ENET_CRS P1_08 // J12-9 #define ENET_CRS P1_08 // J12-9
#define ENET_TX_EN P1_04 // J12-10 #define ENET_TX_EN P1_04 // J12-10
#define ENET_TXD0 P1_00 // J12-11 #define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12 #define ENET_TXD1 P1_01 // J12-12
// //
// Misc. Functions // Misc. Functions
@ -190,9 +190,9 @@
// A custom cable is needed. See the README file in the // A custom cable is needed. See the README file in the
// Marlin\src\config\examples\Mks\Sbase directory // Marlin\src\config\examples\Mks\Sbase directory
#define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7) #define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7)
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) #define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.5) #define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.5)
#define SS_PIN P0_28 #define SS_PIN P0_28
#define SD_DETECT_PIN P0_27 #define SD_DETECT_PIN P0_27
#define SDSS P0_06 #define SDSS P0_06

18
Marlin/src/pins/pins_OMCA.h
Unescape Escape View File

@ -108,13 +108,13 @@
#define E0_DIR_PIN 21 #define E0_DIR_PIN 21
#define E0_ENABLE_PIN 10 #define E0_ENABLE_PIN 10
#define E1_STEP_PIN -1 // 21 #define E1_STEP_PIN -1 // 21
#define E1_DIR_PIN -1 // 20 #define E1_DIR_PIN -1 // 20
#define E1_ENABLE_PIN -1 // 19 #define E1_ENABLE_PIN -1 // 19
#define E2_STEP_PIN -1 // 21 #define E2_STEP_PIN -1 // 21
#define E2_DIR_PIN -1 // 20 #define E2_DIR_PIN -1 // 20
#define E2_ENABLE_PIN -1 // 18 #define E2_ENABLE_PIN -1 // 18
// //
// Temperature Sensors // Temperature Sensors
@ -126,10 +126,10 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector #define HEATER_0_PIN 3 // DONE PWM on RIGHT connector
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
#define FAN_PIN 14 // PWM on MIDDLE connector #define FAN_PIN 14 // PWM on MIDDLE connector
// //
// Misc. Functions // Misc. Functions
@ -145,4 +145,4 @@
#define __GS 18 #define __GS 18
#define __GD 13 #define __GD 13
#define UNUSED_PWM 14 // PWM on LEFT connector #define UNUSED_PWM 14 // PWM on LEFT connector

8
Marlin/src/pins/pins_OMCA_A.h
Unescape Escape View File

@ -107,12 +107,12 @@
#define E0_DIR_PIN 27 #define E0_DIR_PIN 27
#define E0_ENABLE_PIN 24 #define E0_ENABLE_PIN 24
#define E1_STEP_PIN -1 // 19 #define E1_STEP_PIN -1 // 19
#define E1_DIR_PIN -1 // 18 #define E1_DIR_PIN -1 // 18
#define E1_ENABLE_PIN 24 #define E1_ENABLE_PIN 24
#define E2_STEP_PIN -1 // 17 #define E2_STEP_PIN -1 // 17
#define E2_DIR_PIN -1 // 16 #define E2_DIR_PIN -1 // 16
#define E2_ENABLE_PIN 24 #define E2_ENABLE_PIN 24
// //

4
Marlin/src/pins/pins_PRINTRBOARD.h
Unescape Escape View File

@ -148,8 +148,8 @@
#define SDSS 43 // F5 TMS JP2-8 #define SDSS 43 // F5 TMS JP2-8
#define STAT_LED_RED_PIN 12 // C2 JP11-14 #define STAT_LED_RED_PIN 12 // C2 JP11-14
#define STAT_LED_BLUE_PIN 10 // C0 JP11-12 #define STAT_LED_BLUE_PIN 10 // C0 JP11-12
#elif ENABLED(LCD_I2C_PANELOLU2) #elif ENABLED(LCD_I2C_PANELOLU2)

32
Marlin/src/pins/pins_PRINTRBOARD_REVF.h
Unescape Escape View File

@ -218,29 +218,29 @@
#define SDSS 3 // F5 TMS JP2-8 #define SDSS 3 // F5 TMS JP2-8
#define STAT_LED_RED_PIN 12 // C2 JP11-14 #define STAT_LED_RED_PIN 12 // C2 JP11-14
#define STAT_LED_BLUE_PIN 10 // C0 JP11-12 #define STAT_LED_BLUE_PIN 10 // C0 JP11-12
#elif ENABLED(MINIPANEL) #elif ENABLED(MINIPANEL)
#if DISABLED(USE_INTERNAL_SD) #if DISABLED(USE_INTERNAL_SD)
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN# // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN#
#define SDSS 11 // 36 C1 EXP2-13 EXP2-07 #define SDSS 11 // 36 C1 EXP2-13 EXP2-07
#define SD_DETECT_PIN 9 // 34 E1 EXP2-11 EXP2-04 #define SD_DETECT_PIN 9 // 34 E1 EXP2-11 EXP2-04
#endif #endif
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN# // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN#
#define DOGLCD_A0 4 // 29 D4 EXP2-05 EXP1-04 #define DOGLCD_A0 4 // 29 D4 EXP2-05 EXP1-04
#define DOGLCD_CS 5 // 30 D5 EXP2-06 EXP1-05 #define DOGLCD_CS 5 // 30 D5 EXP2-06 EXP1-05
#define BTN_ENC 6 // 31 D6 EXP2-07 EXP1-09 #define BTN_ENC 6 // 31 D6 EXP2-07 EXP1-09
#define BEEPER_PIN 7 // 32 D7 EXP2-08 EXP1-10 #define BEEPER_PIN 7 // 32 D7 EXP2-08 EXP1-10
#define KILL_PIN 8 // 33 E0 EXP2-10 EXP2-03 #define KILL_PIN 8 // 33 E0 EXP2-10 EXP2-03
#define BTN_EN1 10 // 35 C0 EXP2-12 EXP2-06 #define BTN_EN1 10 // 35 C0 EXP2-12 EXP2-06
#define BTN_EN2 12 // 37 C2 EXP2-14 EXP2-08 #define BTN_EN2 12 // 37 C2 EXP2-14 EXP2-08
//#define LCD_BACKLIGHT_PIN 43 // 56 F5 EXP1-12 Not Implemented //#define LCD_BACKLIGHT_PIN 43 // 56 F5 EXP1-12 Not Implemented
//#define SCK 21 // 11 B1 ICSP-04 EXP2-09 //#define SCK 21 // 11 B1 ICSP-04 EXP2-09
//#define MOSI 22 // 12 B2 ICSP-03 EXP2-05 //#define MOSI 22 // 12 B2 ICSP-03 EXP2-05
//#define MISO 23 // 13 B3 ICSP-06 EXP2-05 //#define MISO 23 // 13 B3 ICSP-06 EXP2-05
// increase delays // increase delays
#ifndef ST7920_DELAY_1 #ifndef ST7920_DELAY_1
@ -268,7 +268,7 @@
// //
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn.
#ifndef SDSS #ifndef SDSS
#define SDSS 20 // 10 B0 #define SDSS 20 // 10 B0
#endif #endif
/** /**

8
Marlin/src/pins/pins_RADDS.h
Unescape Escape View File

@ -113,9 +113,9 @@
//#define E3_MS1_PIN 67 //#define E3_MS1_PIN 67
//#define E3_MS2_PIN 68 //#define E3_MS2_PIN 68
//#define E3_MS3_PIN 69 //#define E3_MS3_PIN 69
//#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN //#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN
//#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN //#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN
//#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN //#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN
// //
// Temperature Sensors // Temperature Sensors
@ -140,7 +140,7 @@
#define HEATER_0_PIN 13 #define HEATER_0_PIN 13
#define HEATER_1_PIN 12 #define HEATER_1_PIN 12
#define HEATER_2_PIN 11 #define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED #define HEATER_BED_PIN 7 // BED
#define FAN_PIN 9 #define FAN_PIN 9
#define FAN1_PIN 8 #define FAN1_PIN 8

42
Marlin/src/pins/pins_RAMBO.h
Unescape Escape View File

@ -49,10 +49,10 @@
// //
// Servos // Servos
// //
#define SERVO0_PIN 22 // Motor header MX1 #define SERVO0_PIN 22 // Motor header MX1
#define SERVO1_PIN 23 // Motor header MX2 #define SERVO1_PIN 23 // Motor header MX2
#define SERVO2_PIN 24 // Motor header MX3 #define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5 #define SERVO3_PIN 5 // PWM header pin 5
// //
// Limit Switches // Limit Switches
@ -107,7 +107,7 @@
#define E1_MS2_PIN 64 #define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38 #define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping #define DIGIPOT_CHANNELS { 4,5,3,0,1 } // X Y Z E0 E1 digipot channels to stepper driver mapping
#ifndef DIGIPOT_MOTOR_CURRENT #ifndef DIGIPOT_MOTOR_CURRENT
#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) #define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
#endif #endif
@ -146,8 +146,8 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 31 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 31 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 32 #define SPINDLE_DIR_PIN 32
// //
@ -155,14 +155,14 @@
// //
#define E_MUX0_PIN 17 #define E_MUX0_PIN 17
#define E_MUX1_PIN 16 #define E_MUX1_PIN 16
#define E_MUX2_PIN 84 // 84 in MK2 Firmware #define E_MUX2_PIN 84 // 84 in MK2 Firmware
// //
// LCD / Controller // LCD / Controller
// //
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define KILL_PIN 80 #define KILL_PIN 80
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
@ -174,32 +174,32 @@
#define LCD_PINS_D7 75 #define LCD_PINS_D7 75
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44 #define BEEPER_PIN 44
// NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the
// beeper/buzzer is connected to pin 33; however, the pin used in the // beeper/buzzer is connected to pin 33; however, the pin used in the
// diagram is actually pin 44, so this is correct. // diagram is actually pin 44, so this is correct.
#define DOGLCD_A0 70 #define DOGLCD_A0 70
#define DOGLCD_CS 71 #define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180 #define LCD_SCREEN_ROT_180
#define BTN_EN1 85 #define BTN_EN1 85
#define BTN_EN2 84 #define BTN_EN2 84
#define BTN_ENC 83 #define BTN_ENC 83
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#define STAT_LED_RED_PIN 22 #define STAT_LED_RED_PIN 22
#define STAT_LED_BLUE_PIN 32 #define STAT_LED_BLUE_PIN 32
#else // !VIKI2 && !miniVIKI #else // !VIKI2 && !miniVIKI
#define BEEPER_PIN 79 // AUX-4 #define BEEPER_PIN 79 // AUX-4
// AUX-2 // AUX-2
#define BTN_EN1 76 #define BTN_EN1 76
#define BTN_EN2 77 #define BTN_EN2 77
#define BTN_ENC 78 #define BTN_ENC 78
#define SD_DETECT_PIN 81 #define SD_DETECT_PIN 81
@ -208,7 +208,7 @@
#else // !NEWPANEL - old style panel with shift register #else // !NEWPANEL - old style panel with shift register
// No Beeper added // No Beeper added
#define BEEPER_PIN 33 #define BEEPER_PIN 33
// buttons are attached to a shift register // buttons are attached to a shift register
// Not wired yet // Not wired yet

62
Marlin/src/pins/pins_RAMPS.h
Unescape Escape View File

@ -44,16 +44,8 @@
* 7 | 11 * 7 | 11
*/ */
#if ENABLED(TARGET_LPC1768) #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768." #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#elif defined(__STM32F1__)
#error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1."
#endif
#if DISABLED(IS_RAMPS_SMART) && DISABLED(IS_RAMPS_DUO) && DISABLED(IS_RAMPS4DUE) && DISABLED(TARGET_LPC1768)
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif
#endif #endif
#ifndef BOARD_NAME #ifndef BOARD_NAME
@ -64,7 +56,7 @@
// Servos // Servos
// //
#ifdef IS_RAMPS_13 #ifdef IS_RAMPS_13
#define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI #define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
#else #else
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#endif #endif
@ -205,9 +197,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //
@ -294,10 +286,10 @@
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN) #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first #if NUM_SERVOS <= 1 // try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM
#elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \ #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
&& (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD))) // try to use AUX 2 && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD))) // try to use AUX 2
#define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 44 // MUST BE HARDWARE PWM
#endif #endif
#endif #endif
@ -306,13 +298,13 @@
// //
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE) #if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 5 #define SPINDLE_DIR_PIN 5
#elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \ #elif !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) \
&& (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD))) // try to use AUX 2 && (ENABLED(PANEL_ONE) || ENABLED(VIKI2) || ENABLED(miniVIKI) || ENABLED(MINIPANEL) || ENABLED(REPRAPWORLD_KEYPAD))) // try to use AUX 2
#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 65 #define SPINDLE_DIR_PIN 65
#endif #endif
#endif #endif
@ -341,9 +333,9 @@
// //
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
@ -378,8 +370,8 @@
#else #else
#if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
#define LCD_PINS_DC 25 // Set as output on init #define LCD_PINS_DC 25 // Set as output on init
#define LCD_PINS_RS 27 // Pull low for 1s to init #define LCD_PINS_RS 27 // Pull low for 1s to init
// DOGM SPI LCD Support // DOGM SPI LCD Support
#define DOGLCD_CS 16 #define DOGLCD_CS 16
#define DOGLCD_MOSI 17 #define DOGLCD_MOSI 17
@ -454,8 +446,8 @@
#elif ENABLED(LCD_I2C_VIKI) #elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1 #define BTN_ENC -1
#define LCD_SDSS 53 #define LCD_SDSS 53
@ -476,7 +468,7 @@
#define BTN_ENC 39 #define BTN_ENC 39
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31 #define KILL_PIN 31
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
@ -495,7 +487,7 @@
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define KILL_PIN 41 #define KILL_PIN 41
#elif ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 #elif ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6
#define DOGLCD_A0 27 #define DOGLCD_A0 27
#define DOGLCD_CS 25 #define DOGLCD_CS 25
@ -509,7 +501,7 @@
#define BEEPER_PIN 37 #define BEEPER_PIN 37
// not connected to a pin // not connected to a pin
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define BTN_EN1 31 #define BTN_EN1 31
#define BTN_EN2 33 #define BTN_EN2 33
@ -523,7 +515,7 @@
#define BEEPER_PIN 42 #define BEEPER_PIN 42
// not connected to a pin // not connected to a pin
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 66 #define DOGLCD_CS 66
@ -547,10 +539,6 @@
#define ADC_KEYPAD_PIN 12 #define ADC_KEYPAD_PIN 12
#elif ENABLED(AZSMZ_12864)
// Pins only defined for RAMPS_SMART currently
#else #else
// Beeper on AUX-4 // Beeper on AUX-4
@ -565,9 +553,9 @@
#define BTN_EN2 59 #define BTN_EN2 59
#define BTN_ENC 63 #define BTN_ENC 63
#elif ENABLED(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4 #define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7 #define BTN_ENC 49 // AUX3 PIN 7
#else #else
#define BTN_EN1 37 #define BTN_EN1 37
#define BTN_EN2 35 #define BTN_EN2 35

12
Marlin/src/pins/pins_RAMPS_DUO.h
Unescape Escape View File

@ -68,9 +68,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#undef MAX6675_SS #undef MAX6675_SS
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS 69 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS 69 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS 69 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS 69 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //
@ -105,7 +105,7 @@
#define DOGLCD_CS 69 #define DOGLCD_CS 69
#undef LCD_BACKLIGHT_PIN #undef LCD_BACKLIGHT_PIN
#define LCD_BACKLIGHT_PIN 68 // backlight LED on A14/D68 #define LCD_BACKLIGHT_PIN 68 // backlight LED on A14/D68
#undef KILL_PIN #undef KILL_PIN
#define KILL_PIN 67 #define KILL_PIN 67
@ -117,13 +117,13 @@
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#undef BTN_EN1 #undef BTN_EN1
#define BTN_EN1 67 // encoder #define BTN_EN1 67 // encoder
#undef BTN_ENC #undef BTN_ENC
#define BTN_ENC 66 // enter button #define BTN_ENC 66 // enter button
#elif ENABLED(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#undef BTN_EN2 #undef BTN_EN2
#define BTN_EN2 66 // AUX2 PIN 4 #define BTN_EN2 66 // AUX2 PIN 4
#endif #endif
#endif #endif

32
Marlin/src/pins/pins_RAMPS_FD_V1.h
Unescape Escape View File

@ -142,24 +142,24 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
// ramps-fd lcd adaptor // ramps-fd lcd adaptor
#define BEEPER_PIN 37 #define BEEPER_PIN 37
#define BTN_EN1 33 #define BTN_EN1 33
#define BTN_EN2 31 #define BTN_EN2 31
#define BTN_ENC 35 #define BTN_ENC 35
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23 #define LCD_PINS_D4 23
#define LCD_PINS_D5 25 #define LCD_PINS_D5 25
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
#endif #endif
#if ENABLED(MINIPANEL) #if ENABLED(MINIPANEL)
#define DOGLCD_CS 25 #define DOGLCD_CS 25
#define DOGLCD_A0 27 #define DOGLCD_A0 27
#endif #endif
#endif // ULTRA_LCD #endif // ULTRA_LCD
@ -188,8 +188,8 @@
// //
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE) #if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if HOTENDS < 3 #if HOTENDS < 3
#define SPINDLE_LASER_ENABLE_PIN 45 // Use E2 ENA #define SPINDLE_LASER_ENABLE_PIN 45 // Use E2 ENA
#define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 47 // Use E2 DIR #define SPINDLE_DIR_PIN 47 // Use E2 DIR
#endif #endif
#endif #endif

10
Marlin/src/pins/pins_RAMPS_OLD.h
Unescape Escape View File

@ -77,9 +77,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //
@ -101,11 +101,11 @@
#define SDPOWER 48 #define SDPOWER 48
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define CASE_LIGHT_PIN 45 // MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 45 // MUST BE HARDWARE PWM
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 43 #define SPINDLE_DIR_PIN 43

211
Marlin/src/pins/pins_RAMPS_RE_ARM.h
Unescape Escape View File

@ -47,62 +47,62 @@
// //
// Servos // Servos
// //
#define SERVO0_PIN P1_20 // (11) #define SERVO0_PIN P1_20 // (11)
#define SERVO1_PIN P1_21 // ( 6) also on J5-1 #define SERVO1_PIN P1_21 // ( 6) also on J5-1
#define SERVO2_PIN P1_19 // ( 5) #define SERVO2_PIN P1_19 // ( 5)
#define SERVO3_PIN P1_18 // ( 4) 5V output #define SERVO3_PIN P1_18 // ( 4) 5V output
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN P1_24 // ( 3) 10k pullup to 3.3V, 1K series #define X_MIN_PIN P1_24 // ( 3) 10k pullup to 3.3V, 1K series
#define X_MAX_PIN P1_25 // ( 2) 10k pullup to 3.3V, 1K series #define X_MAX_PIN P1_25 // ( 2) 10k pullup to 3.3V, 1K series
#define Y_MIN_PIN P1_26 // (14) 10k pullup to 3.3V, 1K series #define Y_MIN_PIN P1_26 // (14) 10k pullup to 3.3V, 1K series
#define Y_MAX_PIN P1_27 // (15) 10k pullup to 3.3V, 1K series #define Y_MAX_PIN P1_27 // (15) 10k pullup to 3.3V, 1K series
#define Z_MIN_PIN P1_29 // (18) 10k pullup to 3.3V, 1K series #define Z_MIN_PIN P1_29 // (18) 10k pullup to 3.3V, 1K series
#define Z_MAX_PIN P1_28 // (19) 10k pullup to 3.3V, 1K series #define Z_MAX_PIN P1_28 // (19) 10k pullup to 3.3V, 1K series
// //
// Steppers // Steppers
// //
#define X_STEP_PIN P2_01 // (54) #define X_STEP_PIN P2_01 // (54)
#define X_DIR_PIN P0_11 // (55) #define X_DIR_PIN P0_11 // (55)
#define X_ENABLE_PIN P0_10 // (38) #define X_ENABLE_PIN P0_10 // (38)
#ifndef X_CS_PIN #ifndef X_CS_PIN
#define X_CS_PIN P1_01 // ETH #define X_CS_PIN P1_01 // ETH
#endif #endif
#define Y_STEP_PIN P2_02 // (60) #define Y_STEP_PIN P2_02 // (60)
#define Y_DIR_PIN P0_20 // (61) #define Y_DIR_PIN P0_20 // (61)
#define Y_ENABLE_PIN P0_19 // (56) #define Y_ENABLE_PIN P0_19 // (56)
#ifndef Y_CS_PIN #ifndef Y_CS_PIN
#define Y_CS_PIN P1_04 // ETH #define Y_CS_PIN P1_04 // ETH
#endif #endif
#define Z_STEP_PIN P2_03 // (46) #define Z_STEP_PIN P2_03 // (46)
#define Z_DIR_PIN P0_22 // (48) #define Z_DIR_PIN P0_22 // (48)
#define Z_ENABLE_PIN P0_21 // (62) #define Z_ENABLE_PIN P0_21 // (62)
#ifndef Z_CS_PIN #ifndef Z_CS_PIN
#define Z_CS_PIN P1_10 // ETH #define Z_CS_PIN P1_10 // ETH
#endif #endif
#define E0_STEP_PIN P2_00 // (26) #define E0_STEP_PIN P2_00 // (26)
#define E0_DIR_PIN P0_05 // (28) #define E0_DIR_PIN P0_05 // (28)
#define E0_ENABLE_PIN P0_04 // (24) #define E0_ENABLE_PIN P0_04 // (24)
#ifndef E0_CS_PIN #ifndef E0_CS_PIN
#define E0_CS_PIN P1_14 // ETH #define E0_CS_PIN P1_14 // ETH
#endif #endif
#define E1_STEP_PIN P2_08 // (36) #define E1_STEP_PIN P2_08 // (36)
#define E1_DIR_PIN P2_13 // (34) #define E1_DIR_PIN P2_13 // (34)
#define E1_ENABLE_PIN P4_29 // (30) #define E1_ENABLE_PIN P4_29 // (30)
#ifndef E1_CS_PIN #ifndef E1_CS_PIN
#define E1_CS_PIN -1 #define E1_CS_PIN -1
#endif #endif
//#define E2_STEP_PIN P2_08 // (36) //#define E2_STEP_PIN P2_08 // (36)
//#define E2_DIR_PIN P2_13 // (34) //#define E2_DIR_PIN P2_13 // (34)
//#define E2_ENABLE_PIN P4_29 // (30) //#define E2_ENABLE_PIN P4_29 // (30)
//#ifndef E2_CS_PIN //#ifndef E2_CS_PIN
// #define E2_CS_PIN -1 // #define E2_CS_PIN -1
//#endif //#endif
@ -111,24 +111,23 @@
// Software SPI pins for TMC2130 stepper drivers // Software SPI pins for TMC2130 stepper drivers
// //
#if ENABLED(TMC_USE_SW_SPI) #if ENABLED(TMC_USE_SW_SPI)
#define TMC_SW_MOSI P1_00 // ETH #define TMC_SW_MOSI P1_00 // ETH
#define TMC_SW_MISO P1_08 // ETH #define TMC_SW_MISO P1_08 // ETH
#define TMC_SW_SCK P1_09 // ETH #define TMC_SW_SCK P1_09 // ETH
#endif #endif
// //
// Temperature Sensors // Temperature Sensors
// 3.3V max when defined as an analog input // 3.3V max when defined as an analog input
// //
#define TEMP_0_PIN 0 //A0 (T0) - (67) - TEMP_0_PIN #define TEMP_0_PIN 0 // A0 (T0) - (67) - TEMP_0_PIN
#define TEMP_BED_PIN 1 //A1 (T1) - (68) - TEMP_BED_PIN #define TEMP_BED_PIN 1 // A1 (T1) - (68) - TEMP_BED_PIN
#define TEMP_1_PIN 2 //A2 (T2) - (69) - TEMP_1_PIN #define TEMP_1_PIN 2 // A2 (T2) - (69) - TEMP_1_PIN
#define TEMP_2_PIN 3 //A3 - (63) - J5-3 & AUX-2 #define TEMP_2_PIN 3 // A3 - (63) - J5-3 & AUX-2
#define TEMP_3_PIN 4 //A4 - (37) - BUZZER_PIN #define TEMP_3_PIN 4 // A4 - (37) - BUZZER_PIN
//#define TEMP_4_PIN 5 //A5 - (49) - SD_DETECT_PIN //#define TEMP_4_PIN 5 // A5 - (49) - SD_DETECT_PIN
//#define ?? 6 //A6 - ( 0) - RXD0 - J4-4 & AUX-1 //#define ?? 6 // A6 - ( 0) - RXD0 - J4-4 & AUX-1
#define FILWIDTH_PIN 7 //A7 - ( 1) - TXD0 - J4-5 & AUX-1 #define FILWIDTH_PIN 7 // A7 - ( 1) - TXD0 - J4-5 & AUX-1
// //
// Augmentation for auto-assigning RAMPS plugs // Augmentation for auto-assigning RAMPS plugs
@ -154,13 +153,13 @@
#define MOSFET_D_PIN -1 #define MOSFET_D_PIN -1
#endif #endif
#ifndef RAMPS_D8_PIN #ifndef RAMPS_D8_PIN
#define RAMPS_D8_PIN P2_07 // (8) #define RAMPS_D8_PIN P2_07 // (8)
#endif #endif
#ifndef RAMPS_D9_PIN #ifndef RAMPS_D9_PIN
#define RAMPS_D9_PIN P2_04 // (9) #define RAMPS_D9_PIN P2_04 // (9)
#endif #endif
#ifndef RAMPS_D10_PIN #ifndef RAMPS_D10_PIN
#define RAMPS_D10_PIN P2_05 // (10) #define RAMPS_D10_PIN P2_05 // (10)
#endif #endif
#define HEATER_0_PIN RAMPS_D10_PIN #define HEATER_0_PIN RAMPS_D10_PIN
@ -190,25 +189,25 @@
#endif #endif
#ifndef FAN_PIN #ifndef FAN_PIN
#define FAN_PIN P1_18 // (4) IO pin. Buffer needed #define FAN_PIN P1_18 // (4) IO pin. Buffer needed
#endif #endif
// //
// Misc. Functions // Misc. Functions
// //
#define LED_PIN P4_28 // (13) #define LED_PIN P4_28 // (13)
#define SDSS P1_23 // (53) #define SDSS P1_23 // (53)
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector // define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#ifndef FIL_RUNOUT_PIN #ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN P1_18 // (4) #define FIL_RUNOUT_PIN P1_18 // (4)
#endif #endif
#define PS_ON_PIN P2_12 // (12) #define PS_ON_PIN P2_12 // (12)
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN) #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN)
#if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // try to use servo connector #if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // try to use servo connector
#define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM #define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM
#endif #endif
#endif #endif
@ -256,76 +255,76 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#define BEEPER_PIN P1_30 // (37) not 5V tolerant #define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4 #define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4 #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#ifdef ULTIPANEL #ifdef ULTIPANEL
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
#endif #endif
#if ENABLED(NEWPANEL) #if ENABLED(NEWPANEL)
#if ENABLED(REPRAPWORLD_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
#endif #endif
#else #else
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
#endif #endif
#if ENABLED(VIKI2) || ENABLED(miniVIKI) #if ENABLED(VIKI2) || ENABLED(miniVIKI)
// #define LCD_SCREEN_ROT_180 // #define LCD_SCREEN_ROT_180
#undef BEEPER_PIN #undef BEEPER_PIN
#define BEEPER_PIN P1_30 // (37) may change if cable changes #define BEEPER_PIN P1_30 // (37) may change if cable changes
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4 #define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4 #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#undef DOGLCD_CS #undef DOGLCD_CS
#define DOGLCD_CS P0_16 // (16) #define DOGLCD_CS P0_16 // (16)
#undef LCD_BACKLIGHT_PIN //P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers #undef LCD_BACKLIGHT_PIN //P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
#undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3 #undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3
#undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3 #undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3
#undef LCD_PINS_D5 //P2_06 // (59) J3-8 & AUX-2 #undef LCD_PINS_D5 //P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2 #undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2
#undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector #undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN #define DOGLCD_MOSI MOSI_PIN
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#endif #endif
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 //#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS //#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS
#if ENABLED(MINIPANEL) #if ENABLED(MINIPANEL)
// GLCD features // GLCD features
@ -342,17 +341,17 @@
// Ethernet pins // Ethernet pins
// //
#ifndef ULTIPANEL #ifndef ULTIPANEL
#define ENET_MDIO P1_17 // (71) J12-4 #define ENET_MDIO P1_17 // (71) J12-4
#define ENET_RX_ER P1_14 // (73) J12-6 #define ENET_RX_ER P1_14 // (73) J12-6
#define ENET_RXD1 P1_10 // (75) J12-8 #define ENET_RXD1 P1_10 // (75) J12-8
#endif #endif
#define ENET_MOC P1_16 // (70) J12-3 #define ENET_MOC P1_16 // (70) J12-3
#define REF_CLK P1_15 // (72) J12-5 #define REF_CLK P1_15 // (72) J12-5
#define ENET_RXD0 P1_09 // (74) J12-7 #define ENET_RXD0 P1_09 // (74) J12-7
#define ENET_CRS P1_08 // (76) J12-9 #define ENET_CRS P1_08 // (76) J12-9
#define ENET_TX_EN P1_04 // (77) J12-10 #define ENET_TX_EN P1_04 // (77) J12-10
#define ENET_TXD0 P1_00 // (78) J12-11 #define ENET_TXD0 P1_00 // (78) J12-11
#define ENET_TXD1 P1_01 // (79) J12-12 #define ENET_TXD1 P1_01 // (79) J12-12
/** /**
* Fast PWMS * Fast PWMS

10
Marlin/src/pins/pins_RAMPS_SMART.h
Unescape Escape View File

@ -79,10 +79,10 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#undef MAX6675_SS #undef MAX6675_SS
#define MAX6675_SS 67 // Do not use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS 67 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else #else
#undef MAX6675_SS #undef MAX6675_SS
#define MAX6675_SS 67 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS 67 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //
@ -90,12 +90,12 @@
// //
// Support for AZSMZ 12864 LCD with SD Card 3D printer smart controller control panel // Support for AZSMZ 12864 LCD with SD Card 3D printer smart controller control panel
#if ENABLED(AZSMZ_12864) #if ENABLED(AZSMZ_12864)
#define BEEPER_PIN 66 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 65 #define BEEPER_PIN 66 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 65
#define DOGLCD_A0 59 #define DOGLCD_A0 59
#define DOGLCD_CS 44 #define DOGLCD_CS 44
#define BTN_EN1 58 #define BTN_EN1 58
#define BTN_EN2 40 #define BTN_EN2 40
#define BTN_ENC 67 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 66 #define BTN_ENC 67 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 66
#define SD_DETECT_PIN 49 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN 49 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 42 #define KILL_PIN 42
#endif #endif

10
Marlin/src/pins/pins_RIGIDBOARD.h
Unescape Escape View File

@ -36,8 +36,8 @@
// //
// MOSFET changes // MOSFET changes
// //
#define RAMPS_D10_PIN 9 // EXTRUDER 1 #define RAMPS_D10_PIN 9 // EXTRUDER 1
#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN #define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN
#include "pins_RAMPS.h" #include "pins_RAMPS.h"
@ -74,9 +74,9 @@
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#undef MAX6675_SS #undef MAX6675_SS
#if DISABLED(SDSUPPORT) #if DISABLED(SDSUPPORT)
#define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card #define MAX6675_SS 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card
#else #else
#define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #define MAX6675_SS 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif #endif
// //
@ -86,7 +86,7 @@
#define HEATER_BED_PIN 10 #define HEATER_BED_PIN 10
#undef FAN_PIN #undef FAN_PIN
#define FAN_PIN 8 // Same as RAMPS_13_EEF #define FAN_PIN 8 // Same as RAMPS_13_EEF
// //
// Misc. Functions // Misc. Functions

10
Marlin/src/pins/pins_RIGIDBOARD_V2.h
Unescape Escape View File

@ -39,12 +39,12 @@
// Channels available for DAC, For Rigidboard there are 4 // Channels available for DAC, For Rigidboard there are 4
#define DAC_STEPPER_ORDER { 0, 1, 2, 3 } #define DAC_STEPPER_ORDER { 0, 1, 2, 3 }
#define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value #define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value
#define DAC_STEPPER_ADDRESS 0 #define DAC_STEPPER_ADDRESS 0
#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096 #define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096
#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V #define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V
#define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2 #define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2
#define DAC_DISABLE_PIN 42 // set low to enable DAC #define DAC_DISABLE_PIN 42 // set low to enable DAC
#define DAC_OR_ADDRESS 0x01 #define DAC_OR_ADDRESS 0x01
#ifndef DAC_MOTOR_CURRENT_DEFAULT #ifndef DAC_MOTOR_CURRENT_DEFAULT

4
Marlin/src/pins/pins_RUMBA.h
Unescape Escape View File

@ -154,10 +154,10 @@
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#ifndef SPINDLE_LASER_PWM_PIN #ifndef SPINDLE_LASER_PWM_PIN
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use? #define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use?
#endif #endif
#ifndef SPINDLE_LASER_ENABLE_PIN #ifndef SPINDLE_LASER_ENABLE_PIN
#define SPINDLE_LASER_ENABLE_PIN 14 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 14 // Pin should have a pullup!
#endif #endif
#ifndef SPINDLE_DIR_PIN #ifndef SPINDLE_DIR_PIN
#define SPINDLE_DIR_PIN 15 #define SPINDLE_DIR_PIN 15

36
Marlin/src/pins/pins_RURAMPS4D.h
Unescape Escape View File

@ -60,15 +60,15 @@
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 37 // Support Extension Board #define X_STEP_PIN 37 // Support Extension Board
#define X_DIR_PIN 36 #define X_DIR_PIN 36
#define X_ENABLE_PIN 38 #define X_ENABLE_PIN 38
#define Y_STEP_PIN 32 // Support Extension Board #define Y_STEP_PIN 32 // Support Extension Board
#define Y_DIR_PIN 35 #define Y_DIR_PIN 35
#define Y_ENABLE_PIN 34 #define Y_ENABLE_PIN 34
#define Z_STEP_PIN 30 // Support Extension Board #define Z_STEP_PIN 30 // Support Extension Board
#define Z_DIR_PIN 2 #define Z_DIR_PIN 2
#define Z_ENABLE_PIN 33 #define Z_ENABLE_PIN 33
@ -84,7 +84,7 @@
#define E2_DIR_PIN 23 #define E2_DIR_PIN 23
#define E2_ENABLE_PIN 27 #define E2_ENABLE_PIN 27
#define E3_STEP_PIN 15 // Only For Extension Board #define E3_STEP_PIN 15 // Only For Extension Board
#define E3_DIR_PIN 14 #define E3_DIR_PIN 14
#define E3_ENABLE_PIN 61 #define E3_ENABLE_PIN 61
@ -100,9 +100,9 @@
//#define E3_MS1_PIN ? //#define E3_MS1_PIN ?
//#define E3_MS2_PIN ? //#define E3_MS2_PIN ?
//#define E3_MS3_PIN ? //#define E3_MS3_PIN ?
//#define Z2_MS1_PIN ? // shared with E3_MS1_PIN //#define Z2_MS1_PIN ? // shared with E3_MS1_PIN
//#define Z2_MS2_PIN ? // shared with E3_MS2_PIN //#define Z2_MS2_PIN ? // shared with E3_MS2_PIN
//#define Z2_MS3_PIN ? // shared with E3_MS3_PIN //#define Z2_MS3_PIN ? // shared with E3_MS3_PIN
#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) #if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define Z_PROBE_PIN 49 #define Z_PROBE_PIN 49
@ -120,7 +120,7 @@
#define HEATER_0_PIN 13 #define HEATER_0_PIN 13
#define HEATER_1_PIN 12 #define HEATER_1_PIN 12
#define HEATER_2_PIN 11 #define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED H1 #define HEATER_BED_PIN 7 // BED H1
#define FAN_PIN 9 #define FAN_PIN 9
#define FAN1_PIN 8 #define FAN1_PIN 8
@ -129,15 +129,15 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 0 // ANALOG A0 #define TEMP_0_PIN 0 // ANALOG A0
#define TEMP_1_PIN 1 // ANALOG A1 #define TEMP_1_PIN 1 // ANALOG A1
#define TEMP_2_PIN 2 // ANALOG A2 #define TEMP_2_PIN 2 // ANALOG A2
#define TEMP_3_PIN 3 // ANALOG A2 #define TEMP_3_PIN 3 // ANALOG A2
#define TEMP_BED_PIN 4 // ANALOG A3 #define TEMP_BED_PIN 4 // ANALOG A3
//Thermocouple Use Analog Pins //Thermocouple Use Analog Pins
#if ENABLED(VER_WITH_THERMOCOUPLE) // If Nead, define is in Configuration.h #if ENABLED(VER_WITH_THERMOCOUPLE) // If Nead, define is in Configuration.h
#define TEMP_4_PIN 5 // A5 #define TEMP_4_PIN 5 // A5
#define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support) #define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support)
#endif #endif
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
@ -158,9 +158,9 @@
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 4 // 4,10,52 if using HW SPI. #define SDSS 4 // 4,10,52 if using HW SPI.
#define LED_PIN -1 // 13 - HEATER_0_PIN #define LED_PIN -1 // 13 - HEATER_0_PIN
#define PS_ON_PIN -1 // 65 #define PS_ON_PIN -1 // 65
// MKS TFT / Nextion Use internal USART-1 // MKS TFT / Nextion Use internal USART-1
#define TFT_LCD_MODULE_COM 1 #define TFT_LCD_MODULE_COM 1

10
Marlin/src/pins/pins_SAINSMART_2IN1.h
Unescape Escape View File

@ -21,7 +21,7 @@
*/ */
/** /**
* Sainsmart 2-in-1 pin assignments * Sainsmart 2-in-1 pin assignments
*/ */
#if HOTENDS > 2 || E_STEPPERS > 2 #if HOTENDS > 2 || E_STEPPERS > 2
@ -33,9 +33,9 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define RAMPS_D10_PIN 9 // E #define RAMPS_D10_PIN 9 // E
#define RAMPS_D9_PIN 7 // F PART FAN in front of board next to Extruder heat #define RAMPS_D9_PIN 7 // F PART FAN in front of board next to Extruder heat
// RAMPS_D8_PIN 8 // B // RAMPS_D8_PIN 8 // B
#define MOSFET_D_PIN 10 // F / E #define MOSFET_D_PIN 10 // F / E
#include "pins_RAMPS.h" #include "pins_RAMPS.h"

36
Marlin/src/pins/pins_SANGUINOLOLU_11.h
Unescape Escape View File

@ -90,23 +90,23 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 13 // (extruder) #define HEATER_0_PIN 13 // (extruder)
#if ENABLED(SANGUINOLOLU_V_1_2) #if ENABLED(SANGUINOLOLU_V_1_2)
#define HEATER_BED_PIN 12 // (bed) #define HEATER_BED_PIN 12 // (bed)
#define X_ENABLE_PIN 14 #define X_ENABLE_PIN 14
#define Y_ENABLE_PIN 14 #define Y_ENABLE_PIN 14
#define Z_ENABLE_PIN 26 #define Z_ENABLE_PIN 26
#define E0_ENABLE_PIN 14 #define E0_ENABLE_PIN 14
#if ENABLED(LCD_I2C_PANELOLU2) #if ENABLED(LCD_I2C_PANELOLU2)
#define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan #define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
#endif #endif
#else #else
#define HEATER_BED_PIN 14 // (bed) #define HEATER_BED_PIN 14 // (bed)
#define X_ENABLE_PIN -1 #define X_ENABLE_PIN -1
#define Y_ENABLE_PIN -1 #define Y_ENABLE_PIN -1
#define Z_ENABLE_PIN -1 #define Z_ENABLE_PIN -1
@ -115,7 +115,7 @@
#endif #endif
#if MB(AZTEEG_X1) || MB(STB_11) || MB(CREALITY_ENDER) || ENABLED(IS_MELZI) #if MB(AZTEEG_X1) || MB(STB_11) || MB(CREALITY_ENDER) || ENABLED(IS_MELZI)
#define FAN_PIN 4 // Works for Panelolu2 too #define FAN_PIN 4 // Works for Panelolu2 too
#endif #endif
// //
@ -134,11 +134,11 @@
#if ENABLED(IS_MELZI) #if ENABLED(IS_MELZI)
#define LED_PIN 27 #define LED_PIN 27
#elif MB(STB_11) #elif MB(STB_11)
#define LCD_BACKLIGHT_PIN 17 // LCD backlight LED #define LCD_BACKLIGHT_PIN 17 // LCD backlight LED
#endif #endif
#if DISABLED(SPINDLE_LASER_ENABLE) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // try to use IO Header #if DISABLED(SPINDLE_LASER_ENABLE) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // try to use IO Header
#define CASE_LIGHT_PIN 4 // MUST BE HARDWARE PWM - see if IO Header is available #define CASE_LIGHT_PIN 4 // MUST BE HARDWARE PWM - see if IO Header is available
#endif #endif
/** /**
@ -160,9 +160,9 @@
#if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0 #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if ENABLED(IS_MELZI) #if ENABLED(IS_MELZI)
#define LCD_PINS_RS 30 // CS chip select /SS chip slave select #define LCD_PINS_RS 30 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 29 // SID (MOSI) #define LCD_PINS_ENABLE 29 // SID (MOSI)
#define LCD_PINS_D4 17 // SCK (CLK) clock #define LCD_PINS_D4 17 // SCK (CLK) clock
// Pin 27 is taken by LED_PIN, but Melzi LED does nothing with // Pin 27 is taken by LED_PIN, but Melzi LED does nothing with
// Marlin so this can be used for BEEPER_PIN. You can use this pin // Marlin so this can be used for BEEPER_PIN. You can use this pin
// with M42 instead of BEEPER_PIN. // with M42 instead of BEEPER_PIN.
@ -185,7 +185,7 @@
#define BEEPER_PIN 29 #define BEEPER_PIN 29
#define DOGLCD_CS 17 #define DOGLCD_CS 17
#define LCD_BACKLIGHT_PIN 28 // PA3 #define LCD_BACKLIGHT_PIN 28 // PA3
#elif MB(CREALITY_ENDER) #elif MB(CREALITY_ENDER)
@ -224,7 +224,7 @@
#if ENABLED(IS_MELZI) #if ENABLED(IS_MELZI)
#define BTN_ENC 29 #define BTN_ENC 29
#define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
#else #else
#define BTN_ENC 30 #define BTN_ENC 30
#endif #endif
@ -265,7 +265,7 @@
#else // !LCD_I2C_PANELOLU2 && !LCD_FOR_MELZI && !ZONESTAR_LCD #else // !LCD_I2C_PANELOLU2 && !LCD_FOR_MELZI && !ZONESTAR_LCD
#define BTN_ENC 16 #define BTN_ENC 16
#define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi
#endif #endif
@ -279,8 +279,8 @@
#if ENABLED(SPINDLE_LASER_ENABLE) #if ENABLED(SPINDLE_LASER_ENABLE)
#if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // try to use IO Header #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !(ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)) // try to use IO Header
#define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup/pulldown! #define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 11 #define SPINDLE_DIR_PIN 11
#elif !MB(MELZI) // use X stepper motor socket #elif !MB(MELZI) // use X stepper motor socket
@ -318,8 +318,8 @@
#define X_DIR_PIN 0 #define X_DIR_PIN 0
#define X_ENABLE_PIN 14 #define X_ENABLE_PIN 14
#define X_STEP_PIN 1 #define X_STEP_PIN 1
#define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 21 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 21 // Pin should have a pullup!
#define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin #define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin
#endif #endif
#endif // SPINDLE_LASER_ENABLE #endif // SPINDLE_LASER_ENABLE

8
Marlin/src/pins/pins_SAV_MKI.h
Unescape Escape View File

@ -173,10 +173,10 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 24 // B4 PWM2A #define SPINDLE_LASER_PWM_PIN 24 // B4 PWM2A
#define SPINDLE_LASER_ENABLE_PIN 39 // F1 Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 39 // F1 Pin should have a pullup!
#define SPINDLE_DIR_PIN 40 // F2 #define SPINDLE_DIR_PIN 40 // F2
#define CASE_LIGHT_PIN 0 // D0 PWM0B #define CASE_LIGHT_PIN 0 // D0 PWM0B
#endif #endif

10
Marlin/src/pins/pins_SCOOVO_X9H.h
Unescape Escape View File

@ -33,10 +33,10 @@
// //
// Servos // Servos
// //
#define SERVO0_PIN 22 // Motor header MX1 #define SERVO0_PIN 22 // Motor header MX1
#define SERVO1_PIN 23 // Motor header MX2 #define SERVO1_PIN 23 // Motor header MX2
#define SERVO2_PIN 24 // Motor header MX3 #define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5 #define SERVO3_PIN 5 // PWM header pin 5
// //
// Limit Switches // Limit Switches
@ -91,7 +91,7 @@
#define E1_MS2_PIN 64 #define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38 #define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
// //
// Temperature Sensors // Temperature Sensors

6
Marlin/src/pins/pins_SELENA_COMPACT.h
Unescape Escape View File

@ -73,9 +73,9 @@
// Temperature Sensors // Temperature Sensors
// 3.3V max when defined as an analog input // 3.3V max when defined as an analog input
// //
#define TEMP_BED_PIN 0 // A0 (TH1) #define TEMP_BED_PIN 0 // A0 (TH1)
#define TEMP_0_PIN 1 // A1 (TH2) #define TEMP_0_PIN 1 // A1 (TH2)
#define TEMP_1_PIN 2 // A2 (TH3) #define TEMP_1_PIN 2 // A2 (TH3)
// //

2
Marlin/src/pins/pins_SETHI.h
Unescape Escape View File

@ -56,7 +56,7 @@
#define BOARD_NAME "Sethi 3D_1" #define BOARD_NAME "Sethi 3D_1"
#ifndef GEN7_VERSION #ifndef GEN7_VERSION
#define GEN7_VERSION 12 // v1.x #define GEN7_VERSION 12 // v1.x
#endif #endif
// //

2
Marlin/src/pins/pins_SILVER_GATE.h
Unescape Escape View File

@ -60,7 +60,7 @@
#define HEATER_0_PIN 7 #define HEATER_0_PIN 7
#define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN #define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN
#define CONTROLLER_FAN_PIN 2 #define CONTROLLER_FAN_PIN 2
#define TEMP_0_PIN 7 // Analog Input #define TEMP_0_PIN 7 // Analog Input

25
Marlin/src/pins/pins_STM32F1R.h
Unescape Escape View File

@ -100,7 +100,7 @@
#define HEATER_BED2_PIN -1 // BED2 #define HEATER_BED2_PIN -1 // BED2
#define HEATER_BED3_PIN -1 // BED3 #define HEATER_BED3_PIN -1 // BED3
#define FAN_PIN -1 // (Sprinter config) #define FAN_PIN -1 // (Sprinter config)
// //
// Temperature Sensors // Temperature Sensors
@ -116,9 +116,9 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
#define LCD_PINS_RS PB8 #define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2 #define LCD_PINS_ENABLE PD2
@ -179,8 +179,8 @@
#elif ENABLED(LCD_I2C_VIKI) #elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1 #define BTN_ENC -1
#define LCD_SDSS 53 #define LCD_SDSS 53
@ -200,7 +200,7 @@
#define BTN_ENC 39 #define BTN_ENC 39
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31 #define KILL_PIN 31
@ -225,7 +225,7 @@
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 66 #define DOGLCD_CS 66
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define SDSS 53 #define SDSS 53
#define KILL_PIN 64 #define KILL_PIN 64
@ -256,9 +256,9 @@
#define SHIFT_CLK 44 #define SHIFT_CLK 44
#define SHIFT_LD 42 #define SHIFT_LD 42
#elif ENABLED(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4 #define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7 #define BTN_ENC 49 // AUX3 PIN 7
#else #else
#define BTN_EN1 37 #define BTN_EN1 37
#define BTN_EN2 35 #define BTN_EN2 35
@ -269,7 +269,7 @@
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define KILL_PIN 41 #define KILL_PIN 41
#else #else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this //#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif #endif
#endif #endif
@ -280,4 +280,3 @@
#define U_MIN_PIN -1 #define U_MIN_PIN -1
#define V_MIN_PIN -1 #define V_MIN_PIN -1
#define W_MIN_PIN -1 #define W_MIN_PIN -1

31
Marlin/src/pins/pins_STM3R_MINI.h
Unescape Escape View File

@ -21,7 +21,7 @@
*/ */
#if !defined(__STM32F1__) && !defined(__STM32F4__) #if !defined(__STM32F1__) && !defined(__STM32F4__)
#error "Oops! Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have an STM32F1/4 board selected from the 'Tools -> Boards' menu."
#endif #endif
/** /**
@ -91,13 +91,13 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN PD12 // EXTRUDER 1 #define HEATER_0_PIN PD12 // EXTRUDER 1
//#define HEATER_1_PIN PD13 //#define HEATER_1_PIN PD13
//#define HEATER_2_PIN -1 //#define HEATER_2_PIN -1
#define HEATER_BED_PIN PB9 // BED #define HEATER_BED_PIN PB9 // BED
//#define HEATER_BED2_PIN -1 // BED2 //#define HEATER_BED2_PIN -1 // BED2
//#define HEATER_BED3_PIN -1 // BED3 //#define HEATER_BED3_PIN -1 // BED3
#define FAN_PIN PD14 #define FAN_PIN PD14
#define FAN1_PIN PD13 #define FAN1_PIN PD13
@ -124,9 +124,9 @@
#if ENABLED(ULTRA_LCD) #if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select #define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI) #define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock #define LCD_PINS_D4 52 // SCK (CLK) clock
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
#define LCD_PINS_RS PB8 #define LCD_PINS_RS PB8
#define LCD_PINS_ENABLE PD2 #define LCD_PINS_ENABLE PD2
@ -187,8 +187,8 @@
#elif ENABLED(LCD_I2C_VIKI) #elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1 #define BTN_ENC -1
#define LCD_SDSS 53 #define LCD_SDSS 53
@ -208,7 +208,7 @@
#define BTN_ENC 39 #define BTN_ENC 39
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
#define KILL_PIN 31 #define KILL_PIN 31
@ -234,7 +234,7 @@
// Pins for DOGM SPI LCD Support // Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44 #define DOGLCD_A0 44
#define DOGLCD_CS 66 #define DOGLCD_CS 66
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define SDSS 53 #define SDSS 53
#define KILL_PIN 64 #define KILL_PIN 64
@ -265,9 +265,9 @@
#define SHIFT_CLK 44 #define SHIFT_CLK 44
#define SHIFT_LD 42 #define SHIFT_LD 42
#elif ENABLED(PANEL_ONE) #elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3 #define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4 #define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7 #define BTN_ENC 49 // AUX3 PIN 7
#else #else
#define BTN_EN1 37 #define BTN_EN1 37
#define BTN_EN2 35 #define BTN_EN2 35
@ -278,7 +278,7 @@
#define SD_DETECT_PIN 49 #define SD_DETECT_PIN 49
#define KILL_PIN 41 #define KILL_PIN 41
#else #else
//#define SD_DETECT_PIN -1 // Ramps doesn't use this //#define SD_DETECT_PIN -1 // Ramps doesn't use this
#endif #endif
#endif #endif
@ -289,4 +289,3 @@
#define U_MIN_PIN -1 #define U_MIN_PIN -1
#define V_MIN_PIN -1 #define V_MIN_PIN -1
#define W_MIN_PIN -1 #define W_MIN_PIN -1

6
Marlin/src/pins/pins_TEENSY2.h
Unescape Escape View File

@ -177,6 +177,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_ENABLE_PIN 5 // D5 Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 5 // D5 Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 0 // D0 PWM0B MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 0 // D0 PWM0B MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 7 // D7 #define SPINDLE_DIR_PIN 7 // D7

6
Marlin/src/pins/pins_TEENSY35_36.h
Unescape Escape View File

@ -108,11 +108,11 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM
#define Y_STOP_PIN 26 #define Y_STOP_PIN 26
#define Z_STOP_PIN 28 #define Z_STOP_PIN 28
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 #define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2
#define TEMP_1_PIN 0 #define TEMP_1_PIN 0
#define TEMP_BED_PIN 1 // Bed / Analog pin numbering #define TEMP_BED_PIN 1 // Bed / Analog pin numbering
#define SDSS 39 // 8 #define SDSS 39 // 8
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN 1 #define PS_ON_PIN 1
#define ALARM_PIN -1 #define ALARM_PIN -1

120
Marlin/src/pins/pins_THE_BORG.h
Unescape Escape View File

@ -21,7 +21,7 @@
*/ */
#if !defined(STM32F7) #if !defined(STM32F7)
#error "Oops! Make sure you have an STM32F7 board selected from the 'Tools -> Boards' menu." #error "Oops! Make sure you have an STM32F7 board selected from the 'Tools -> Boards' menu."
#endif #endif
#define DEFAULT_MACHINE_NAME "The-Borge" #define DEFAULT_MACHINE_NAME "The-Borge"
@ -29,7 +29,7 @@
#define LARGE_FLASH true #define LARGE_FLASH true
#define E2END 0xFFF // EEPROM end address #define E2END 0xFFF // EEPROM end address
// Ignore temp readings during develpment. // Ignore temp readings during develpment.
#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE #define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
@ -51,49 +51,49 @@
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN _STM32_PIN(PORTE, 9) #define X_MIN_PIN _STM32_PIN(PORTE, 9)
#define X_MAX_PIN _STM32_PIN(PORTE, 10) #define X_MAX_PIN _STM32_PIN(PORTE, 10)
#define Y_MIN_PIN _STM32_PIN(PORTE, 7) #define Y_MIN_PIN _STM32_PIN(PORTE, 7)
#define Y_MAX_PIN _STM32_PIN(PORTE, 8) #define Y_MAX_PIN _STM32_PIN(PORTE, 8)
#define Z_MIN_PIN _STM32_PIN(PORTF, 15) #define Z_MIN_PIN _STM32_PIN(PORTF, 15)
#define Z_MAX_PIN _STM32_PIN(PORTG, 0) #define Z_MAX_PIN _STM32_PIN(PORTG, 0)
#define E_MIN_PIN _STM32_PIN(PORTE, 2) #define E_MIN_PIN _STM32_PIN(PORTE, 2)
#define E_MAX_PIN _STM32_PIN(PORTE, 3) #define E_MAX_PIN _STM32_PIN(PORTE, 3)
// //
// Z Probe (when not Z_MIN_PIN) // Z Probe (when not Z_MIN_PIN)
// //
#ifndef Z_MIN_PROBE_PIN #ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN _STM32_PIN(PORTA, 4) #define Z_MIN_PROBE_PIN _STM32_PIN(PORTA, 4)
#endif #endif
// //
// Steppers // Steppers
// //
#define STEPPER_ENABLE_PIN _STM32_PIN(PORTE, 0) #define STEPPER_ENABLE_PIN _STM32_PIN(PORTE, 0)
#define X_STEP_PIN _STM32_PIN(PORTC, 6) //96, 39 in arduino #define X_STEP_PIN _STM32_PIN(PORTC, 6) // 96, 39 in Arduino
#define X_DIR_PIN _STM32_PIN(PORTC, 7) #define X_DIR_PIN _STM32_PIN(PORTC, 7)
#define X_ENABLE_PIN _STM32_PIN(PORTC, 8) #define X_ENABLE_PIN _STM32_PIN(PORTC, 8)
#define Y_STEP_PIN _STM32_PIN(PORTD, 9) #define Y_STEP_PIN _STM32_PIN(PORTD, 9)
#define Y_DIR_PIN _STM32_PIN(PORTD, 10) #define Y_DIR_PIN _STM32_PIN(PORTD, 10)
#define Y_ENABLE_PIN _STM32_PIN(PORTD, 11) #define Y_ENABLE_PIN _STM32_PIN(PORTD, 11)
#define Z_STEP_PIN _STM32_PIN(PORTE, 15) #define Z_STEP_PIN _STM32_PIN(PORTE, 15)
#define Z_DIR_PIN _STM32_PIN(PORTG, 1) #define Z_DIR_PIN _STM32_PIN(PORTG, 1)
#define Z_ENABLE_PIN _STM32_PIN(PORTD, 8) #define Z_ENABLE_PIN _STM32_PIN(PORTD, 8)
#define E0_STEP_PIN _STM32_PIN(PORTB, 1) #define E0_STEP_PIN _STM32_PIN(PORTB, 1)
#define E0_DIR_PIN _STM32_PIN(PORTB, 2) #define E0_DIR_PIN _STM32_PIN(PORTB, 2)
#define E0_ENABLE_PIN _STM32_PIN(PORTE, 11) #define E0_ENABLE_PIN _STM32_PIN(PORTE, 11)
#define E1_STEP_PIN _STM32_PIN(PORTC, 4) #define E1_STEP_PIN _STM32_PIN(PORTC, 4)
#define E1_DIR_PIN _STM32_PIN(PORTC, 5) #define E1_DIR_PIN _STM32_PIN(PORTC, 5)
#define E1_ENABLE_PIN _STM32_PIN(PORTB, 0) #define E1_ENABLE_PIN _STM32_PIN(PORTB, 0)
#define E2_STEP_PIN _STM32_PIN(PORTC, 13) #define E2_STEP_PIN _STM32_PIN(PORTC, 13)
@ -105,13 +105,13 @@
#define Z2_ENABLE_PIN _STM32_PIN(PORTC, 15) #define Z2_ENABLE_PIN _STM32_PIN(PORTC, 15)
#define SCK_PIN _STM32_PIN(PORTA, 5) #define SCK_PIN _STM32_PIN(PORTA, 5)
#define MISO_PIN _STM32_PIN(PORTA, 6) #define MISO_PIN _STM32_PIN(PORTA, 6)
#define MOSI_PIN _STM32_PIN(PORTA, 7) #define MOSI_PIN _STM32_PIN(PORTA, 7)
#define SPI1_SCK_PIN _STM32_PIN(PORTA, 5) #define SPI1_SCK_PIN _STM32_PIN(PORTA, 5)
#define SPI1_MISO_PIN _STM32_PIN(PORTA, 6) #define SPI1_MISO_PIN _STM32_PIN(PORTA, 6)
#define SPI1_MOSI_PIN _STM32_PIN(PORTA, 7) #define SPI1_MOSI_PIN _STM32_PIN(PORTA, 7)
#define SPI6_SCK_PIN _STM32_PIN(PORTG, 13) #define SPI6_SCK_PIN _STM32_PIN(PORTG, 13)
#define SPI6_MISO_PIN _STM32_PIN(PORTG, 12) #define SPI6_MISO_PIN _STM32_PIN(PORTG, 12)
@ -121,14 +121,14 @@
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN _STM32_PIN(PORTC, 3) // Analog Input #define TEMP_0_PIN _STM32_PIN(PORTC, 3) // Analog Input
#define TEMP_1_PIN _STM32_PIN(PORTC, 2) // Analog Input #define TEMP_1_PIN _STM32_PIN(PORTC, 2) // Analog Input
#define TEMP_2_PIN _STM32_PIN(PORTC, 1) // Analog Input #define TEMP_2_PIN _STM32_PIN(PORTC, 1) // Analog Input
#define TEMP_3_PIN _STM32_PIN(PORTC, 0) // Analog Input #define TEMP_3_PIN _STM32_PIN(PORTC, 0) // Analog Input
#define TEMP_BED_PIN _STM32_PIN(PORTF, 10) // Analog Input #define TEMP_BED_PIN _STM32_PIN(PORTF, 10) // Analog Input
#define TEMP_5_PIN _STM32_PIN(PORTE, 12) // Analog Input, Probe temp #define TEMP_5_PIN _STM32_PIN(PORTE, 12) // Analog Input, Probe temp
// //
// Heaters / Fans // Heaters / Fans
@ -138,25 +138,25 @@
#define HEATER_BED_PIN _STM32_PIN(PORTF, 6) #define HEATER_BED_PIN _STM32_PIN(PORTF, 6)
#define FAN_PIN _STM32_PIN(PORTD, 13) #define FAN_PIN _STM32_PIN(PORTD, 13)
#define FAN1_PIN _STM32_PIN(PORTA, 0) #define FAN1_PIN _STM32_PIN(PORTA, 0)
#define FAN2_PIN _STM32_PIN(PORTA, 1) #define FAN2_PIN _STM32_PIN(PORTA, 1)
#define ORIG_E0_AUTO_FAN_PIN _STM32_PIN(PORTA, 1) // Use this by NOT overriding E0_AUTO_FAN_PIN #define ORIG_E0_AUTO_FAN_PIN _STM32_PIN(PORTA, 1) // Use this by NOT overriding E0_AUTO_FAN_PIN
// //
// Misc. Functions // Misc. Functions
// //
//#define CASE_LIGHT_PIN_CI _STM32_PIN(PORTF, 13) // //#define CASE_LIGHT_PIN_CI _STM32_PIN(PORTF, 13)
//#define CASE_LIGHT_PIN_DO _STM32_PIN(PORTF, 14) // //#define CASE_LIGHT_PIN_DO _STM32_PIN(PORTF, 14)
//#define NEOPIXEL_PIN _STM32_PIN(PORTF, 13) //#define NEOPIXEL_PIN _STM32_PIN(PORTF, 13)
// //
// Prusa i3 MK2 Multi Material Multiplexer Support // Prusa i3 MK2 Multi Material Multiplexer Support
// //
#define E_MUX0_PIN _STM32_PIN(PORTG, 3) #define E_MUX0_PIN _STM32_PIN(PORTG, 3)
#define E_MUX1_PIN _STM32_PIN(PORTG, 4) #define E_MUX1_PIN _STM32_PIN(PORTG, 4)
// //
// Servos // Servos
@ -166,31 +166,31 @@
#define SERVO1_PIN _STM32_PIN(PORTE, 14) #define SERVO1_PIN _STM32_PIN(PORTE, 14)
#define SDSS _STM32_PIN(PORTA, 8) #define SDSS _STM32_PIN(PORTA, 8)
#define SS_PIN _STM32_PIN(PORTA, 8) #define SS_PIN _STM32_PIN(PORTA, 8)
#define LED_PIN _STM32_PIN(PORTA, 2) //Alive #define LED_PIN _STM32_PIN(PORTA, 2) // Alive
#define PS_ON_PIN _STM32_PIN(PORTA, 3) #define PS_ON_PIN _STM32_PIN(PORTA, 3)
#define KILL_PIN -1//_STM32_PIN(PORTD, 5) //EXP2-10 #define KILL_PIN -1//_STM32_PIN(PORTD, 5) // EXP2-10
#define PWR_LOSS _STM32_PIN(PORTG, 5) //Power loss / nAC_FAULT #define PWR_LOSS _STM32_PIN(PORTG, 5) // Power loss / nAC_FAULT
// //
// MAX7219_DEBUG // MAX7219_DEBUG
// //
#define MAX7219_CLK_PIN _STM32_PIN(PORTG, 10) //EXP1-1 #define MAX7219_CLK_PIN _STM32_PIN(PORTG, 10) // EXP1-1
#define MAX7219_DIN_PIN _STM32_PIN(PORTD, 7) //EXP1-3 #define MAX7219_DIN_PIN _STM32_PIN(PORTD, 7) // EXP1-3
#define MAX7219_LOAD_PIN _STM32_PIN(PORTD, 1) //EXP1-5 #define MAX7219_LOAD_PIN _STM32_PIN(PORTD, 1) // EXP1-5
// //
// LCD / Controller // LCD / Controller
// //
//#define SD_DETECT_PIN -1 //_STM32_PIN(PORTB, 6)) //EXP2-4 //#define SD_DETECT_PIN -1 //_STM32_PIN(PORTB, 6)) // EXP2-4
#define BEEPER_PIN _STM32_PIN(PORTG, 10) //EXP1-1 #define BEEPER_PIN _STM32_PIN(PORTG, 10) // EXP1-1
#define LCD_PINS_RS _STM32_PIN(PORTG, 9) //EXP1-4 #define LCD_PINS_RS _STM32_PIN(PORTG, 9) // EXP1-4
#define LCD_PINS_ENABLE _STM32_PIN(PORTD, 7) //EXP1-3 #define LCD_PINS_ENABLE _STM32_PIN(PORTD, 7) // EXP1-3
#define LCD_PINS_D4 _STM32_PIN(PORTD, 1) //EXP1-5 #define LCD_PINS_D4 _STM32_PIN(PORTD, 1) // EXP1-5
#define LCD_PINS_D5 _STM32_PIN(PORTF, 0) //EXP1-6 #define LCD_PINS_D5 _STM32_PIN(PORTF, 0) // EXP1-6
#define LCD_PINS_D6 _STM32_PIN(PORTD, 3) //EXP1-7 #define LCD_PINS_D6 _STM32_PIN(PORTD, 3) // EXP1-7
#define LCD_PINS_D7 _STM32_PIN(PORTD, 4) //EXP1-8 #define LCD_PINS_D7 _STM32_PIN(PORTD, 4) // EXP1-8
#define BTN_EN1 _STM32_PIN(PORTD, 6) //EXP2-5 #define BTN_EN1 _STM32_PIN(PORTD, 6) // EXP2-5
#define BTN_EN2 _STM32_PIN(PORTD, 0) //EXP2-3 #define BTN_EN2 _STM32_PIN(PORTD, 0) // EXP2-3
#define BTN_ENC _STM32_PIN(PORTG, 11) //EXP1-2 #define BTN_ENC _STM32_PIN(PORTG, 11) // EXP1-2

8
Marlin/src/pins/pins_ULTIMAIN_2.h
Unescape Escape View File

@ -101,8 +101,8 @@
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN 39 #define SD_DETECT_PIN 39
#define LED_PIN 8 #define LED_PIN 8
#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered #define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered
#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. #define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.
// //
// LCD / Controller // LCD / Controller
@ -127,8 +127,8 @@
#if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light #if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light
#undef LED_PIN #undef LED_PIN
#define SPINDLE_DIR_PIN 16 #define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 8 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 8 // MUST BE HARDWARE PWM
#else #else
#undef LED_PIN #undef LED_PIN
#define CASE_LIGHT_PIN 8 #define CASE_LIGHT_PIN 8

8
Marlin/src/pins/pins_ULTIMAKER.h
Unescape Escape View File

@ -43,7 +43,7 @@
// //
// Servos // Servos
// //
#define SERVO0_PIN 13 // untested #define SERVO0_PIN 13 // UNTESTED
// //
// Limit Switches // Limit Switches
@ -157,6 +157,6 @@
// //
// M3/M4/M5 - Spindle/Laser Control // M3/M4/M5 - Spindle/Laser Control
// //
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header #define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header

64
Marlin/src/pins/pins_ULTIMAKER_OLD.h
Unescape Escape View File

@ -72,21 +72,21 @@
// Limit Switches // Limit Switches
// //
#if ENABLED(board_rev_1_1_TO_1_3) #if ENABLED(board_rev_1_1_TO_1_3)
#define X_MIN_PIN 15 // SW1 #define X_MIN_PIN 15 // SW1
#define X_MAX_PIN 14 // SW2 #define X_MAX_PIN 14 // SW2
#define Y_MIN_PIN 17 // SW3 #define Y_MIN_PIN 17 // SW3
#define Y_MAX_PIN 16 // SW4 #define Y_MAX_PIN 16 // SW4
#define Z_MIN_PIN 19 // SW5 #define Z_MIN_PIN 19 // SW5
#define Z_MAX_PIN 18 // SW6 #define Z_MAX_PIN 18 // SW6
#endif #endif
#if ENABLED(board_rev_1_0) #if ENABLED(board_rev_1_0)
#define X_MIN_PIN 13 // SW1 #define X_MIN_PIN 13 // SW1
#define X_MAX_PIN 12 // SW2 #define X_MAX_PIN 12 // SW2
#define Y_MIN_PIN 11 // SW3 #define Y_MIN_PIN 11 // SW3
#define Y_MAX_PIN 10 // SW4 #define Y_MAX_PIN 10 // SW4
#define Z_MIN_PIN 9 // SW5 #define Z_MIN_PIN 9 // SW5
#define Z_MAX_PIN 8 // SW6 #define Z_MAX_PIN 8 // SW6
#endif #endif
#if ENABLED(board_rev_1_5) #if ENABLED(board_rev_1_5)
@ -124,9 +124,9 @@
#define E0_DIR_PIN 45 #define E0_DIR_PIN 45
#define E0_ENABLE_PIN 41 #define E0_ENABLE_PIN 41
#define E1_STEP_PIN -1 // 49 #define E1_STEP_PIN -1 // 49
#define E1_DIR_PIN -1 // 47 #define E1_DIR_PIN -1 // 47
#define E1_ENABLE_PIN -1 // 48 #define E1_ENABLE_PIN -1 // 48
// //
// Temperature Sensors // Temperature Sensors
@ -138,7 +138,7 @@
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 2 #define HEATER_0_PIN 2
//#define HEATER_1_PIN 3 // used for case light Rev A said "1" //#define HEATER_1_PIN 3 // used for case light Rev A said "1"
#define HEATER_BED_PIN 4 #define HEATER_BED_PIN 4
// //
@ -196,7 +196,7 @@
// case light - see spindle section for more info on available hardware PWMs // case light - see spindle section for more info on available hardware PWMs
// //
#if !PIN_EXISTS(CASE_LIGHT) && ENABLED(board_rev_1_5) #if !PIN_EXISTS(CASE_LIGHT) && ENABLED(board_rev_1_5)
#define CASE_LIGHT_PIN 7 // use PWM - MUST BE HARDWARE PWM #define CASE_LIGHT_PIN 7 // use PWM - MUST BE HARDWARE PWM
#endif #endif
// //
@ -214,19 +214,19 @@
#undef Z_MIN_PIN // SW5 #undef Z_MIN_PIN // SW5
#undef Z_MAX_PIN // SW6 #undef Z_MAX_PIN // SW6
#define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM #define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM
#define Y_STOP_PIN 12 // SW2 #define Y_STOP_PIN 12 // SW2
#define Z_STOP_PIN 11 // SW3 #define Z_STOP_PIN 11 // SW3
#define SPINDLE_DIR_PIN 10 // SW4 #define SPINDLE_DIR_PIN 10 // SW4
#define SPINDLE_LASER_PWM_PIN 9 // SW5 MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // SW5 MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 8 // SW6 Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 8 // SW6 Pin should have a pullup!
#elif ENABLED(board_rev_1_5) // use the same pins - but now they are on a different connector #elif ENABLED(board_rev_1_5) // use the same pins - but now they are on a different connector
#define SPINDLE_DIR_PIN 10 // EXP3-6 (silkscreen says 10) #define SPINDLE_DIR_PIN 10 // EXP3-6 (silkscreen says 10)
#define SPINDLE_LASER_PWM_PIN 9 // EXP3-7 (silkscreen says 9) MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 9 // EXP3-7 (silkscreen says 9) MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 8 // EXP3-8 (silkscreen says 8) Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 8 // EXP3-8 (silkscreen says 8) Pin should have a pullup!
#elif ENABLED(board_rev_1_1_TO_1_3) #elif ENABLED(board_rev_1_1_TO_1_3)
@ -249,14 +249,14 @@
#define E0_DIR_PIN 47 #define E0_DIR_PIN 47
#define E0_ENABLE_PIN 48 #define E0_ENABLE_PIN 48
#define SPINDLE_DIR_PIN 43 #define SPINDLE_DIR_PIN 43
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM #define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup! #define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup!
#elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available #elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available
#undef HEATER_BED_PIN #undef HEATER_BED_PIN
#define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket #define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM - Special precautions usually needed. #define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM - Special precautions usually needed.
#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup! (Probably pin 6 on the 10-pin #define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup! (Probably pin 6 on the 10-pin
// connector closest to the E0 socket) // connector closest to the E0 socket)
#endif #endif
#endif #endif
#endif #endif

128
Marlin/src/pins/pins_ULTRATRONICS_PRO.h
Unescape Escape View File

@ -35,117 +35,117 @@
// Servos // Servos
// //
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#define SERVO0_PIN 11 #define SERVO0_PIN 11
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN 12 #define SERVO1_PIN 12
#endif #endif
#endif #endif
// //
// Limit Switches // Limit Switches
// //
#define X_MIN_PIN 31 #define X_MIN_PIN 31
#define X_MAX_PIN 30 #define X_MAX_PIN 30
#define Y_MIN_PIN 12 #define Y_MIN_PIN 12
#define Y_MAX_PIN 11 #define Y_MAX_PIN 11
#define Z_MIN_PIN 29 #define Z_MIN_PIN 29
#define Z_MAX_PIN 28 #define Z_MAX_PIN 28
// //
// Steppers // Steppers
// //
#define X_STEP_PIN 35 #define X_STEP_PIN 35
#define X_DIR_PIN 34 #define X_DIR_PIN 34
#define X_ENABLE_PIN 37 #define X_ENABLE_PIN 37
#define Y_STEP_PIN 22 #define Y_STEP_PIN 22
#define Y_DIR_PIN 23 #define Y_DIR_PIN 23
#define Y_ENABLE_PIN 33 #define Y_ENABLE_PIN 33
#define Z_STEP_PIN 25 #define Z_STEP_PIN 25
#define Z_DIR_PIN 26 #define Z_DIR_PIN 26
#define Z_ENABLE_PIN 24 #define Z_ENABLE_PIN 24
#define E0_STEP_PIN 47 #define E0_STEP_PIN 47
#define E0_DIR_PIN 46 #define E0_DIR_PIN 46
#define E0_ENABLE_PIN 48 #define E0_ENABLE_PIN 48
#define E1_STEP_PIN 44 #define E1_STEP_PIN 44
#define E1_DIR_PIN 36 #define E1_DIR_PIN 36
#define E1_ENABLE_PIN 45 #define E1_ENABLE_PIN 45
#define E2_STEP_PIN 42 #define E2_STEP_PIN 42
#define E2_DIR_PIN 41 #define E2_DIR_PIN 41
#define E2_ENABLE_PIN 43 #define E2_ENABLE_PIN 43
#define E3_STEP_PIN 39 #define E3_STEP_PIN 39
#define E3_DIR_PIN 38 #define E3_DIR_PIN 38
#define E3_ENABLE_PIN 40 #define E3_ENABLE_PIN 40
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN 0 // Analog Input #define TEMP_0_PIN 0 // Analog Input
#define TEMP_1_PIN 2 // Analog Input #define TEMP_1_PIN 2 // Analog Input
#define TEMP_2_PIN 3 // Analog Input #define TEMP_2_PIN 3 // Analog Input
#define TEMP_3_PIN 4 // Analog Input #define TEMP_3_PIN 4 // Analog Input
#define TEMP_BED_PIN 1 // Analog Input #define TEMP_BED_PIN 1 // Analog Input
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN 3 #define HEATER_0_PIN 3
#define HEATER_1_PIN 8 #define HEATER_1_PIN 8
#define HEATER_2_PIN 7 #define HEATER_2_PIN 7
#define HEATER_3_PIN 9 #define HEATER_3_PIN 9
#define HEATER_BED_PIN 2 #define HEATER_BED_PIN 2
#define FAN_PIN 6 #define FAN_PIN 6
#define FAN2_PIN 5 #define FAN2_PIN 5
// //
// Misc. Functions // Misc. Functions
// //
#define SDSS 59 #define SDSS 59
#define SD_DETECT_PIN 60 #define SD_DETECT_PIN 60
#define LED_PIN 13 #define LED_PIN 13
#define PS_ON_PIN 32 #define PS_ON_PIN 32
// //
// SPI Buses // SPI Buses
// //
#define DAC0_SYNC 53 // PB14 #define DAC0_SYNC 53 // PB14
#define SPI_CHAN_DAC 1 #define SPI_CHAN_DAC 1
#define SPI_CHAN_EEPROM1 -1 #define SPI_CHAN_EEPROM1 -1
#define SPI_EEPROM1_CS -1 #define SPI_EEPROM1_CS -1
#define SPI_EEPROM2_CS -1 #define SPI_EEPROM2_CS -1
#define SPI_FLASH_CS -1 #define SPI_FLASH_CS -1
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#define MAX6675_SS 65 #define MAX6675_SS 65
#define MAX31855_SS0 65 #define MAX31855_SS0 65
#define MAX31855_SS1 52 #define MAX31855_SS1 52
#define MAX31855_SS2 50 #define MAX31855_SS2 50
#define MAX31855_SS3 51 #define MAX31855_SS3 51
#define ENC424_SS 61 #define ENC424_SS 61
// //
// LCD / Controller // LCD / Controller
// //
#define BEEPER_PIN 27 #define BEEPER_PIN 27
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS A8 // CS chip select / SS chip slave select #define LCD_PINS_RS A8 // CS chip select / SS chip slave select
#define LCD_PINS_ENABLE MOSI // SID (MOSI) #define LCD_PINS_ENABLE MOSI // SID (MOSI)
#define LCD_PINS_D4 SCK // SCK (CLK) clock #define LCD_PINS_D4 SCK // SCK (CLK) clock
#define BTN_EN1 20 #define BTN_EN1 20
#define BTN_EN2 21 #define BTN_EN2 21
#define BTN_ENC 64 #define BTN_ENC 64
#endif // REPRAPWORLD_GRAPHICAL_LCD #endif // REPRAPWORLD_GRAPHICAL_LCD

Write Preview
Loading…
Cancel
Save