Toss obsolete DEBUG_LEVELING_FEATURE tests

Marlin/src/module/motion.cpp

@@ -538,10 +538,8 @@ void clean_up_after_endstop_or_probe_move() {
 
     #endif
 
-  #if ENABLED(DEBUG_LEVELING_FEATURE)
   if (DEBUGGING(LEVELING))
     SERIAL_ECHOLNPAIR("Axis ", axis_codes[axis], " min:", soft_endstop[axis].min, " max:", soft_endstop[axis].max);
-  #endif
 }
 
   /**

Marlin/src/module/tool_change.cpp

@@ -605,61 +605,49 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
      * 9. Apply Z hotend offset to current position
      */
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) DEBUG_POS("Starting Autopark", current_position);
-    #endif
 
     // 1. Raise Z-Axis to give enough clearance
 
     current_position[Z_AXIS] += SWITCHING_TOOLHEAD_Z_HOP;
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) DEBUG_POS("(1) Raise Z-Axis ", current_position);
-    #endif
     planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Z_AXIS], active_extruder);
 
     // 2. Move to position near active extruder parking
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) {
       planner.synchronize();
       SERIAL_ECHOLNPAIR("(2) Move near active extruder parking", active_extruder);
       DEBUG_POS("Moving ParkPos", current_position);
     }
-    #endif
     current_position[X_AXIS] = placexpos + hotend_offset[X_AXIS][active_extruder];
     current_position[Y_AXIS] = SWITCHING_TOOLHEAD_Y_POS + SWITCHING_TOOLHEAD_Y_CLEAR + hotend_offset[Y_AXIS][active_extruder];
     planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[X_AXIS], active_extruder);
 
     // 3. Move gently to park position of active extruder
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) {
       planner.synchronize();
       SERIAL_ECHOLNPAIR("(3) Move gently to park position of active extruder", active_extruder);
       DEBUG_POS("Moving ParkPos", current_position);
     }
-    #endif
 
     current_position[Y_AXIS] -= SWITCHING_TOOLHEAD_Y_CLEAR;
     planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.5, active_extruder);
 
     // 4. Disengage magnetic field, wait for delay
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(4) Disengage magnet");
-    #endif
 
     planner.synchronize();
     est_deactivate_solenoid();
 
     // 5. Leave extruder and move to position near new extruder parking
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) {
       SERIAL_ECHOLNPGM("(5) Move near new extruder parking");
       DEBUG_POS("Moving ParkPos", current_position);
     }
-    #endif
 
     current_position[Y_AXIS] += SWITCHING_TOOLHEAD_Y_CLEAR;
     planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.5f, active_extruder);
@@ -670,30 +658,25 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
 
     // 6. Move gently to park position of new extruder
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) {
       planner.synchronize();
       SERIAL_ECHOLNPGM("(6) Move near new extruder");
     }
-    #endif
 
     current_position[Y_AXIS] -= SWITCHING_TOOLHEAD_Y_CLEAR;
     planner.buffer_line(current_position, planner.settings.max_feedrate_mm_s[Y_AXIS] * 0.5f, active_extruder);
 
     // 7. Engage magnetic field for new extruder parking
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
-      if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(7) Engage magnetic field");
-    #endif
-
     planner.synchronize();
+
+    if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(7) Engage magnetic field");
+
     est_activate_solenoid();
 
     // 8. Unpark extruder
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("(8) Unpark extruder");
-    #endif
 
     current_position[Y_AXIS] += SWITCHING_TOOLHEAD_Y_CLEAR;
 
@@ -703,12 +686,10 @@ inline void fast_line_to_current(const AxisEnum fr_axis) {
 
     current_position[Z_AXIS] += hotend_offset[Z_AXIS][active_extruder] - hotend_offset[Z_AXIS][tmp_extruder];
 
-    #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) {
       planner.synchronize();
       DEBUG_POS("(9) Applying Z-offset", current_position);
     }
-    #endif
   }
 
 #endif // ELECTROMAGNETIC_SWITCHING_TOOLHEAD