✨ Zonestar ZM3E2, ZM3E4 V1, ZM3E4 V2 (#22498)
ellensp
3 years ago
committed by
Scott Lahteine
parent
86e78410d6
commit
3924545912
@ -0,0 +1,235 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#define BOARD_INFO_NAME "ZONESTAR ZM3E2 V1.0"
|
||||
|
||||
#define DISABLE_DEBUG
|
||||
//#define DISABLE_JTAG
|
||||
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#define EEPROM_PAGE_SIZE (0x800) // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
#endif
|
||||
|
||||
//=============================================================================
|
||||
// Zonestar ZM3E2 V1.0 (STM32F103RCT6) board pin assignments
|
||||
//=============================================================================
|
||||
// PA0 PWR_HOLD | PB0 BEEP | PC0 HEATER_0
|
||||
// PA1 FAN_PIN | PB1 KILL | PC1 HEATER_BED
|
||||
// PA2 TX2 | PB2 LCD_SDA | PC2 TEMP_BED
|
||||
// PA3 RX2 | PB3 E1_EN | PC3 TEMP_E0
|
||||
// PA4 SD_CS | PB4 Z_STOP | PC4 SD_DETECT
|
||||
// PA5 SD_SCK | PB5 Z_DIR | PC5 BTN_EN2
|
||||
// PA6 SD_MISO | PB6 Z_STEP | PC6 FAN1
|
||||
// PA7 SD_MOSI | PB7 Z_EN | PC7 FIL_RUNOUT
|
||||
// PA8 X_DIR | PB8 Y_STEP | PC8 X_EN
|
||||
// PA9 LCD_RS | PB9 Y_DIR | PC9 X_STEP
|
||||
// PA10 LCD_SCK | PB10 BTN_ENC | PC10 Z_MIN_PROBE_PIN
|
||||
// PA11 USB_D- | PB11 BTN_EN1 | PC11 FIL_RUNOUT2
|
||||
// PA12 USB_D+ | PB12 LED | PC12 E1_DIR
|
||||
// PA13 MS1 | PB13 E0_EN | PC13 Y_STOP
|
||||
// PA14 MS2 | PB14 E0_STEP | PC14 Y_EN
|
||||
// PA15 PWM | PB15 E0_DIR | PC15 X_STOP
|
||||
// PD0 NC
|
||||
// PD1 NC
|
||||
// PD2 E1_STEP
|
||||
|
||||
//=============================================================================
|
||||
// EXP1 connector
|
||||
// MARK I/O ZONESTAR_12864LCD ZONESTAR_12864OLED
|
||||
// 10 MOSI PB1 KILL SDA
|
||||
// 9 SCK PB0 BEEP SCK
|
||||
// 8 TX1 PA9 DOGLCD_CS CS
|
||||
// 7 RX1 PA10 DOGLCD_SCK DC
|
||||
// 6 ENA PC5 BTN_EN2 KNOB_ENB
|
||||
// 5 DAT PB2 DOGLCD_MOSI RESET
|
||||
// 4 TX3 PB10 BTN_ENC KNOB_ENC
|
||||
// 3 RX3 PB11 BTN_EN1 KNOB_ENA
|
||||
// 2 +5V
|
||||
// 1 GND
|
||||
|
||||
#define EXP1_03_PIN PB11
|
||||
#define EXP1_04_PIN PB10
|
||||
#define EXP1_05_PIN PB2
|
||||
#define EXP1_06_PIN PC5
|
||||
#define EXP1_07_PIN PA10
|
||||
#define EXP1_08_PIN PA9
|
||||
#define EXP1_09_PIN PB0
|
||||
#define EXP1_10_PIN PB1
|
||||
|
||||
// AUX1 connector
|
||||
// 1 +5V
|
||||
// 2 TX2 PA2 UART2_TX
|
||||
// 3 RX2 PA3 UART2_RX
|
||||
// 4 GND
|
||||
|
||||
// AUX2 connector to BLTouch
|
||||
// 1 +5V
|
||||
// 2 SEN PC10
|
||||
// 3 PWM PA15
|
||||
// 4 GND
|
||||
//=============================================================================
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PA15
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PC15
|
||||
#define Y_STOP_PIN PC13
|
||||
#define Z_STOP_PIN PB4
|
||||
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN PC10 // BLTouch (3DTouch)
|
||||
#endif
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#define FIL_RUNOUT_PIN PC7 // E0_SW
|
||||
//#define FIL_RUNOUT2_PIN PC11 // E1_SW
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define MS1_PIN PA13
|
||||
#define MS2_PIN PA14
|
||||
|
||||
#define X_STEP_PIN PC9
|
||||
#define X_DIR_PIN PA8
|
||||
#define X_ENABLE_PIN PC8
|
||||
|
||||
#define Y_STEP_PIN PB8
|
||||
#define Y_DIR_PIN PB9
|
||||
#define Y_ENABLE_PIN PC14
|
||||
|
||||
#define Z_STEP_PIN PB6
|
||||
#define Z_DIR_PIN PB5
|
||||
#define Z_ENABLE_PIN PB7
|
||||
|
||||
#define E0_STEP_PIN PB14
|
||||
#define E0_DIR_PIN PB15
|
||||
#define E0_ENABLE_PIN PB13
|
||||
|
||||
#define E1_STEP_PIN PD2
|
||||
#define E1_DIR_PIN PC12
|
||||
#define E1_ENABLE_PIN PB3
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC0 // EXTRUDER 1
|
||||
#define HEATER_BED_PIN PC1 // BED
|
||||
|
||||
#define FAN1_PIN PC6
|
||||
#define FAN_PIN PA1
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_BED_PIN PC2 // Analog Input
|
||||
#define TEMP_0_PIN PC3 // Analog Input
|
||||
|
||||
#define LED_PIN PB12
|
||||
//#define KILL_PIN PB1 // @EXP1
|
||||
#define SUICIDE_PIN PA0
|
||||
|
||||
//
|
||||
// SD card
|
||||
//
|
||||
#define ENABLE_SPI1
|
||||
#define SD_DETECT_PIN PC4
|
||||
#define SD_SCK_PIN PA5
|
||||
#define SD_MISO_PIN PA6
|
||||
#define SD_MOSI_PIN PA7
|
||||
#define SD_SS_PIN PA4
|
||||
|
||||
//
|
||||
// LCD Pins
|
||||
//
|
||||
#if ENABLED(ZONESTAR_12864LCD)
|
||||
|
||||
//================================================================================
|
||||
// LCD 128x64
|
||||
//================================================================================
|
||||
// EXP1 connector
|
||||
// MARK I/O ZONESTAR_12864LCD
|
||||
// 10 MOSI PB1 KILL
|
||||
// 9 SCK PB0 BEEP
|
||||
// 8 TX1 PA9 LCD_PINS_RS
|
||||
// 7 RX1 PA10 LCD_PINS_D4
|
||||
// 6 ENA PC5 BTN_EN2
|
||||
// 5 DAT PB2 LCD_PINS_ENABLE
|
||||
// 4 TX3 PB10 BTN_ENC
|
||||
// 3 RX3 PB11 BTN_EN1
|
||||
// 2 +5V
|
||||
// 1 GND
|
||||
|
||||
#define LCDSCREEN_NAME "ZONESTAR LCD12864"
|
||||
#define LCD_PINS_RS EXP1_08_PIN
|
||||
#define LCD_PINS_ENABLE EXP1_05_PIN
|
||||
#define LCD_PINS_D4 EXP1_07_PIN
|
||||
//#define KILL_PIN EXP1_10_PIN
|
||||
#define BEEPER_PIN EXP1_09_PIN
|
||||
#define BTN_EN1 EXP1_03_PIN
|
||||
#define BTN_EN2 EXP1_06_PIN
|
||||
#define BTN_ENC EXP1_04_PIN
|
||||
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
|
||||
#define BOARD_ST7920_DELAY_2 DELAY_NS(200)
|
||||
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
|
||||
|
||||
#elif EITHER(ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306)
|
||||
|
||||
//================================================================================
|
||||
// OLED 128x64
|
||||
//================================================================================
|
||||
// 10 MOSI PB1 OLED_SDA
|
||||
// 9 SCK PB0 OLED_SCK
|
||||
// 8 TX1 PA9 OLED_CS
|
||||
// 7 RX1 PA10 OLED_DC
|
||||
// 6 ENA PC5 KNOB_ENA
|
||||
// 5 DAT PB2 OLED_RESET
|
||||
// 4 TX3 PB10 KNOB_ENC
|
||||
// 3 RX3 PB11 KNOB_ENB
|
||||
|
||||
#define FORCE_SOFT_SPI
|
||||
#define LCDSCREEN_NAME "ZONESTAR 12864OLED"
|
||||
#define LCD_PINS_RS EXP1_05_PIN // = LCD_RESET_PIN
|
||||
#define LCD_PINS_DC EXP1_07_PIN // DC
|
||||
#define DOGLCD_CS EXP1_08_PIN // CS
|
||||
#define DOGLCD_A0 LCD_PINS_DC // A0 = DC
|
||||
#define DOGLCD_MOSI EXP1_10_PIN // SDA
|
||||
#define DOGLCD_SCK EXP1_09_PIN // SCK
|
||||
// Encoder
|
||||
#define BTN_EN1 EXP1_03_PIN
|
||||
#define BTN_EN2 EXP1_06_PIN
|
||||
#define BTN_ENC EXP1_04_PIN
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,355 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#define BOARD_INFO_NAME "ZONESTAR ZM3E4 V1.0"
|
||||
|
||||
//#define DISABLE_DEBUG
|
||||
#define DISABLE_JTAG
|
||||
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#define EEPROM_PAGE_SIZE (0x800) // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
#endif
|
||||
|
||||
//#define OPTION_DUALZ_DRIVE
|
||||
//#define OPTION_Z2_ENDSTOP
|
||||
//#define SWITCH_EXTRUDER_SEQUENCE
|
||||
|
||||
//=============================================================================
|
||||
// Zonestar ZM3E4 V1.0 (STM32F103VCT6) board pin assignments
|
||||
//=============================================================================
|
||||
// PA0 | PB0 HEAT_1 | PC0 AXU_SDA
|
||||
// PA1 | PB1 FAN1 | PC1 TEMP_E1
|
||||
// PA2 HEAT_BED | PB2 BOOT1 | PC2 TEMP_E0
|
||||
// PA3 PWR_HOLD | PB3 SPI3_SCK | PC3 TEMP_BED
|
||||
// PA4 SD_CS | PB4 SPI3_MISO | PC4 SD_DETECT
|
||||
// PA5 SD_SCK | PB5 SPI3_MOSI | PC5 HEAT_0
|
||||
// PA6 SD_MISO | PB6 SERVO3 | PC6 E1_STEP
|
||||
// PA7 SD_MOSI | PB7 SERVO2 | PC7 E1_EN
|
||||
// PA8 X_DIR | PB8 FAN2/SERVO1 | PC8 FIL_RUNOUT_PIN
|
||||
// PA9 UART1_RX | PB9 SERVO0 | PC9 E0_DIR
|
||||
// PA10 UART1_TX | PB10 TX3 | PC10 E0_EN
|
||||
// PA11 USB_D- | PB11 RX3 | PC11 Z2_EN
|
||||
// PA12 USB_D+ | PB12 LED | PC12 Z2_STEP
|
||||
// PA13 SWD_SDO | PB13 Z1_MAX | PC13 X_MIN
|
||||
// PA14 SWD_SCK | PB14 Y_MAX | PC14 WIFI_RST
|
||||
// PA15 SPI3_CS | PB15 PWR_DET | PC15 WIFI_CS
|
||||
// PD0 Z2_DIR | PE0 Y_EN
|
||||
// PD1 Z2_MIN | PE1 Y_STEP
|
||||
// PD2 Z1_EN | PE2 Y_DIR
|
||||
// PD3 Z1_STEP | PE3 Y_MIN
|
||||
// PD4 Z1_DIR | PE4 X_DIR
|
||||
// PD5 WIFI_RXD | PE5 X_STEP
|
||||
// PD6 WIFI_TXD | PE6 X_EN
|
||||
// PD7 Z1_MIN | PE7 AXU_SCL
|
||||
// PD8 X_MAX | PE8 BTN_EN1
|
||||
// PD9 E3_DIR | PE9 LCD_SCK
|
||||
// PD10 E3_STEP | PE10 LCD_MOSI
|
||||
// PD11 E3_EN | PE11 BEEPER
|
||||
// PD12 E2_DIR | PE12 LCD_EN
|
||||
// PD13 E2_STEP | PE13 KILL
|
||||
// PD14 E2_EN | PE14 BTN_EN2
|
||||
// PD15 E1_DIR | PE15 BTN_ENC
|
||||
//=============================================================================
|
||||
|
||||
// EXP1 connector
|
||||
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
|
||||
// 10 RS PE13 KILL BTN_ENC
|
||||
// 9 BP PE11 BEEP BEEP
|
||||
// 8 EN PE12 DOGLCD_CS LCDRS
|
||||
// 7 MOSI PE10 DOGLCD_SCK LCDE
|
||||
// 6 EN1 PE8 BTN_EN1 NC
|
||||
// 5 SCK PE9 DOGLCD_MOSI LCD4
|
||||
// 4 ENC PE15 BTN_ENC NC
|
||||
// 3 EN2 PE14 BTN_EN2 NC
|
||||
// 2 +5V +5V
|
||||
// 1 GND GND
|
||||
|
||||
#define EXP1_03_PIN PE14
|
||||
#define EXP1_04_PIN PE15
|
||||
#define EXP1_05_PIN PE9
|
||||
#define EXP1_06_PIN PE8
|
||||
#define EXP1_07_PIN PE10
|
||||
#define EXP1_08_PIN PE12
|
||||
#define EXP1_09_PIN PE11
|
||||
#define EXP1_10_PIN PE13
|
||||
|
||||
// EXP2 connector
|
||||
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
|
||||
// 10
|
||||
// 9
|
||||
// 8 RX0 PA9 UART1_RX
|
||||
// 7 TX0 PA10 UART1_TX BTN_EN2
|
||||
// 6 CS3 PA15
|
||||
// 5 MISO3 PB4 BTN_EN1
|
||||
// 4 MOSI3 PB5 KILL
|
||||
// 3 SCK3 PB3
|
||||
// 2 +5V +5V
|
||||
// 1 GND GND
|
||||
|
||||
#define EXP2_03_PIN PB3
|
||||
#define EXP2_04_PIN PB5
|
||||
#define EXP2_05_PIN PB4
|
||||
#define EXP2_06_PIN PA15
|
||||
#define EXP2_07_PIN PA10
|
||||
#define EXP2_08_PIN PA9
|
||||
|
||||
// AUX1 connector
|
||||
// 1 +5V
|
||||
// 2 GND
|
||||
// 3 RX3 PB11 UART3_RX
|
||||
// 4 TX3 PB10 UART3_TX
|
||||
// 5 SCL PE7
|
||||
// 6 SDA PC0
|
||||
|
||||
// WiFi
|
||||
// 1 +5V
|
||||
// 2 GND
|
||||
// 3 WIFI_TXD PD5 UART2_RX
|
||||
// 4 WIFI_RXD PD6 UART2_TX
|
||||
// 5 WIFI_RST PC14
|
||||
// 6 WIFI_CS PC15
|
||||
//=============================================================================
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PB9
|
||||
#define SERVO2_PIN PB7
|
||||
#define SERVO3_PIN PB6
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PC13
|
||||
#define X_MAX_PIN PD8
|
||||
#define Y_MIN_PIN PE3
|
||||
#define Y_MAX_PIN PB14
|
||||
#define Z_MIN_PIN PD7
|
||||
#define Z_MAX_PIN PB13
|
||||
|
||||
//
|
||||
// Filament Runout Sensor
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN PC8
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#if ENABLED(COREXY)
|
||||
#define X_ENABLE_PIN PE0
|
||||
#define X_STEP_PIN PE1
|
||||
#define X_DIR_PIN PE2
|
||||
|
||||
#define Y_ENABLE_PIN PE6
|
||||
#define Y_STEP_PIN PE5
|
||||
#define Y_DIR_PIN PE4
|
||||
#else
|
||||
#define X_ENABLE_PIN PE6
|
||||
#define X_STEP_PIN PE5
|
||||
#define X_DIR_PIN PE4
|
||||
|
||||
#define Y_ENABLE_PIN PE0
|
||||
#define Y_STEP_PIN PE1
|
||||
#define Y_DIR_PIN PE2
|
||||
#endif
|
||||
|
||||
#define Z_ENABLE_PIN PD2
|
||||
#define Z_STEP_PIN PD3
|
||||
#define Z_DIR_PIN PD4
|
||||
|
||||
#ifdef OPTION_DUALZ_DRIVE
|
||||
#define Z2_ENABLE_PIN PC11
|
||||
#define Z2_STEP_PIN PC12
|
||||
#define Z2_DIR_PIN PD0
|
||||
#endif
|
||||
|
||||
#ifdef OPTION_Z2_ENDSTOP
|
||||
#define Z2_MIN_PIN PD1
|
||||
#define Z2_MAX_PIN PB12
|
||||
#endif
|
||||
|
||||
#ifdef SWITCH_EXTRUDER_SEQUENCE
|
||||
#define E3_ENABLE_PIN PC10
|
||||
#define E3_STEP_PIN PA8
|
||||
#define E3_DIR_PIN PC9
|
||||
|
||||
#define E2_STEP_PIN PC6
|
||||
#define E2_DIR_PIN PD15
|
||||
#define E2_ENABLE_PIN PC7
|
||||
|
||||
#define E1_STEP_PIN PD13
|
||||
#define E1_DIR_PIN PD12
|
||||
#define E1_ENABLE_PIN PD14
|
||||
|
||||
#define E0_STEP_PIN PD10
|
||||
#define E0_DIR_PIN PD9
|
||||
#define E0_ENABLE_PIN PD11
|
||||
#else
|
||||
#define E0_ENABLE_PIN PC10
|
||||
#define E0_STEP_PIN PA8
|
||||
#define E0_DIR_PIN PC9
|
||||
|
||||
#define E1_STEP_PIN PC6
|
||||
#define E1_DIR_PIN PD15
|
||||
#define E1_ENABLE_PIN PC7
|
||||
|
||||
#define E2_STEP_PIN PD13
|
||||
#define E2_DIR_PIN PD12
|
||||
#define E2_ENABLE_PIN PD14
|
||||
|
||||
#define E3_STEP_PIN PD10
|
||||
#define E3_DIR_PIN PD9
|
||||
#define E3_ENABLE_PIN PD11
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC2 // TH0
|
||||
#define TEMP_BED_PIN PC3 // TB1
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC5 // HEATER0
|
||||
#define HEATER_BED_PIN PA2 // HOT BED
|
||||
|
||||
#if ENABLED(OPTION_CHAMBER)
|
||||
#define TEMP_CHAMBER_PIN PC1
|
||||
#define HEATER_CHAMBER_PIN PB0
|
||||
#else
|
||||
#define TEMP_1_PIN PC1 // TH1
|
||||
#define HEATER_1_PIN PB0 // HEATER1
|
||||
#endif
|
||||
|
||||
#define FAN_PIN PB1 // FAN1
|
||||
#define FAN1_PIN PB8 // FAN2
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
|
||||
//#define POWER_LOSS_PIN PB15
|
||||
#define LED_PIN PA0
|
||||
#define SUICIDE_PIN PA3
|
||||
|
||||
//
|
||||
// SD card
|
||||
//
|
||||
#define ENABLE_SPI1
|
||||
#define SD_DETECT_PIN PC4
|
||||
#define SD_SCK_PIN PA5
|
||||
#define SD_MISO_PIN PA6
|
||||
#define SD_MOSI_PIN PA7
|
||||
#define SD_SS_PIN PA4
|
||||
|
||||
// WiFi Functions
|
||||
#define WIFI_RST PC15
|
||||
#define WIFI_EN PC14
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if ENABLED(ZONESTAR_12864LCD)
|
||||
#define LCDSCREEN_NAME "ZONESTAR LCD12864"
|
||||
#define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4!
|
||||
#define LCD_PINS_ENABLE EXP1_05_PIN // 6 DATA make sure for zonestar zm3e4!
|
||||
#define LCD_PINS_D4 EXP1_07_PIN // 8 SCK make sure for zonestar zm3e4!
|
||||
#define BEEPER_PIN EXP1_09_PIN
|
||||
#define KILL_PIN -1 // EXP1_10_PIN
|
||||
#define BTN_EN1 EXP1_06_PIN
|
||||
#define BTN_EN2 EXP1_03_PIN
|
||||
#define BTN_ENC EXP1_04_PIN
|
||||
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define LCDSCREEN_NAME "REPRAPDISCOUNT LCD12864"
|
||||
#define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4!
|
||||
#define LCD_PINS_ENABLE EXP1_07_PIN // 6 DATA make sure for zonestar zm3e4!
|
||||
#define LCD_PINS_D4 EXP1_05_PIN // 8 SCK make sure for zonestar zm3e4!
|
||||
#define BEEPER_PIN EXP1_09_PIN
|
||||
#define KILL_PIN EXP2_04_PIN
|
||||
#define BTN_EN1 EXP2_05_PIN
|
||||
#define BTN_EN2 EXP2_07_PIN
|
||||
#define BTN_ENC EXP1_10_PIN
|
||||
#elif ENABLED(ZONESTAR_DWIN_LCD)
|
||||
// Connect to EXP2 connector
|
||||
#define LCDSCREEN_NAME "ZONESTAR DWIN LCD"
|
||||
#define BEEPER_PIN EXP2_06_PIN
|
||||
#define KILL_PIN PC0
|
||||
#define BTN_EN1 EXP2_03_PIN
|
||||
#define BTN_EN2 EXP2_04_PIN
|
||||
#define BTN_ENC EXP2_05_PIN
|
||||
#endif
|
||||
|
||||
#if ENABLED(ZONESTAR_LCD2004_KNOB)
|
||||
#define LCDSCREEN_NAME "LCD2004 KNOB"
|
||||
#define LCD_PINS_RS EXP1_08_PIN
|
||||
#define LCD_PINS_ENABLE EXP1_07_PIN
|
||||
#define LCD_PINS_D4 EXP1_05_PIN
|
||||
#define LCD_PINS_D5 EXP1_06_PIN
|
||||
#define LCD_PINS_D6 EXP1_03_PIN
|
||||
#define LCD_PINS_D7 EXP1_04_PIN
|
||||
#define BTN_EN1 EXP2_07_PIN
|
||||
#define BTN_EN2 EXP2_05_PIN
|
||||
#define BTN_ENC EXP1_10_PIN
|
||||
#define BEEPER_PIN EXP1_09_PIN
|
||||
#define KILL_PIN EXP2_04_PIN
|
||||
#elif ENABLED(ZONESTAR_LCD2004_ADCKEY)
|
||||
#define LCDSCREEN_NAME "LCD2004 5KEY"
|
||||
#define LCD_PINS_RS EXP1_08_PIN
|
||||
#define LCD_PINS_ENABLE EXP1_07_PIN
|
||||
#define LCD_PINS_D4 EXP1_05_PIN
|
||||
#define LCD_PINS_D5 EXP1_06_PIN
|
||||
#define LCD_PINS_D6 EXP1_03_PIN
|
||||
#define LCD_PINS_D7 EXP1_04_PIN
|
||||
#define ADC_KEYPAD_PIN PC0 // PIN6 of AUX1
|
||||
#endif
|
||||
|
||||
#if HAS_MARLINUI_U8GLIB
|
||||
#define BOARD_ST7920_DELAY_1 DELAY_NS(125)
|
||||
#define BOARD_ST7920_DELAY_2 DELAY_NS(250)
|
||||
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
|
||||
#endif
|
||||
|
||||
// Remap SERVO0 PIN for BLTouch
|
||||
#if ENABLED(BLTOUCH_ON_EXP1)
|
||||
// BLTouch connected to EXP1
|
||||
#define BLTOUCH_PROBE_PIN EXP1_06_PIN
|
||||
#define BLTOUCH_GND_PIN EXP1_04_PIN
|
||||
#undef SERVO0_PIN
|
||||
#define SERVO0_PIN EXP1_03_PIN
|
||||
#elif ENABLED(BLTOUCH_ON_EXP2)
|
||||
// BLTouch connected to EXP2
|
||||
#define BLTOUCH_PROBE_PIN EXP2_03_PIN
|
||||
#define BLTOUCH_GND_PIN EXP2_04_PIN
|
||||
#undef SERVO0_PIN
|
||||
#define SERVO0_PIN EXP2_06_PIN
|
||||
#else
|
||||
#define BLTOUCH_PROBE_PIN PB13
|
||||
#endif
|
||||
@ -0,0 +1,328 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#define BOARD_INFO_NAME "ZONESTAR ZM3E4 V2.0"
|
||||
|
||||
//#define DISABLE_DEBUG
|
||||
#define DISABLE_JTAG
|
||||
|
||||
#if NO_EEPROM_SELECTED
|
||||
#define FLASH_EEPROM_EMULATION
|
||||
#define EEPROM_PAGE_SIZE (0x800) // 2KB
|
||||
#define EEPROM_START_ADDRESS (0x08000000 + (STM32_FLASH_SIZE) * 1024 - 2 * EEPROM_PAGE_SIZE)
|
||||
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
|
||||
#endif
|
||||
|
||||
//#define OPTION_DUALZ_DRIVE
|
||||
//#define OPTION_Z2_ENDSTOP
|
||||
//#define OPTION_REPEAT_PRINTING
|
||||
//#define SWITCH_EXTRUDER_SEQUENCE
|
||||
|
||||
//=============================================================================
|
||||
// Zonestar ZM3E4 V2.0 (STM32F103VET6) board pin assignments
|
||||
//=============================================================================
|
||||
// PA0 | PB0 HEAT_1 | PC0 AUX_SDA
|
||||
// PA1 | PB1 FAN1 | PC1 TEMP_E1
|
||||
// PA2 HEAT_BED | PB2 BOOT1 | PC2 TEMP_E0
|
||||
// PA3 PWR_HOLD | PB3 SPI3_SCK | PC3 TEMP_BED
|
||||
// PA4 SD_CS | PB4 SPI3_MISO | PC4 SD_DETECT
|
||||
// PA5 SD_SCK | PB5 SPI3_MOSI | PC5 HEAT_0
|
||||
// PA6 SD_MISO | PB6 SERVO3 | PC6 E1_STEP
|
||||
// PA7 SD_MOSI | PB7 SERVO2 | PC7 E1_EN
|
||||
// PA8 X_DIR | PB8 FAN2/SERVO1 | PC8 FIL_RUNOUT_PIN
|
||||
// PA9 UART1_RX | PB9 SERVO0 | PC9 E0_DIR
|
||||
// PA10 UART1_TX | PB10 TX3 | PC10 E0_EN
|
||||
// PA11 USB_D- | PB11 RX3 | PC11 Z2_EN
|
||||
// PA12 USB_D+ | PB12 LED | PC12 Z2_STEP
|
||||
// PA13 SWD_SDO | PB13 Z1_MAX | PC13 X_MIN
|
||||
// PA14 SWD_SCK | PB14 Y_MAX | PC14 WIFI_RST
|
||||
// PA15 SPI3_CS | PB15 PWR_DET | PC15 WIFI_CS
|
||||
// PD0 Z2_DIR | PE0 Y_EN
|
||||
// PD1 Z2_MIN | PE1 Y_STEP
|
||||
// PD2 Z1_EN | PE2 Y_DIR
|
||||
// PD3 Z1_STEP | PE3 Y_MIN
|
||||
// PD4 Z1_DIR | PE4 X_DIR
|
||||
// PD5 WIFI_RXD | PE5 X_STEP
|
||||
// PD6 WIFI_TXD | PE6 X_EN
|
||||
// PD7 Z1_MIN | PE7 AUX_SCL
|
||||
// PD8 X_MAX | PE8 BTN_EN1
|
||||
// PD9 E3_DIR | PE9 LCD_SCK
|
||||
// PD10 E3_STEP | PE10 LCD_MOSI
|
||||
// PD11 E3_EN | PE11 BEEPER
|
||||
// PD12 E2_DIR | PE12 LCD_EN
|
||||
// PD13 E2_STEP | PE13 KILL
|
||||
// PD14 E2_EN | PE14 BTN_EN2
|
||||
// PD15 E1_DIR | PE15 BTN_ENC
|
||||
|
||||
//=============================================================================
|
||||
// EXP1 connector
|
||||
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
|
||||
// 10 RS PE13 KILL BTN_ENC
|
||||
// 9 BP PE11 BEEP BEEP
|
||||
// 8 EN PE12 DOGLCD_CS LCDRS
|
||||
// 7 MOSI PE10 DOGLCD_SCK LCDE
|
||||
// 6 EN1 PE8 BTN_EN1 NC
|
||||
// 5 SCK PE9 DOGLCD_MOSI LCD4
|
||||
// 4 ENC PE15 BTN_ENC NC
|
||||
// 3 EN2 PE14 BTN_EN2 NC
|
||||
// 2 +5V
|
||||
// 1 GND
|
||||
|
||||
#define EXP1_03_PIN PE14
|
||||
#define EXP1_04_PIN PE15
|
||||
#define EXP1_05_PIN PE9
|
||||
#define EXP1_06_PIN PE8
|
||||
#define EXP1_07_PIN PE10
|
||||
#define EXP1_08_PIN PE12
|
||||
#define EXP1_09_PIN PE11
|
||||
#define EXP1_10_PIN PE13
|
||||
|
||||
// EXP2 connector
|
||||
// MARK I/O ZONESTAR_LCD12864 REPRAPDISCOUNT_LCD12864
|
||||
// 10 SDA PC0
|
||||
// 9 SCL PE7
|
||||
// 8 RX1 PA9 UART1_RX
|
||||
// 7 TX1 PA10 UART1_TX BTN_EN2
|
||||
// 6 CS3 PA15
|
||||
// 5 MISO3 PB4 BTN_EN1
|
||||
// 4 MOSI3 PB5 KILL
|
||||
// 3 SCK3 PB3
|
||||
// 2 +5V
|
||||
// 1 GND
|
||||
|
||||
#define EXP2_03_PIN PB3
|
||||
#define EXP2_04_PIN PB5
|
||||
#define EXP2_05_PIN PB4
|
||||
#define EXP2_06_PIN PA15
|
||||
#define EXP2_07_PIN PA10
|
||||
#define EXP2_08_PIN PA9
|
||||
#define EXP2_09_PIN PE7
|
||||
#define EXP2_10_PIN PC0
|
||||
|
||||
// AUX1 connector
|
||||
// 1 +5V
|
||||
// 2 GND
|
||||
// 3 RX3 PB11 UART3_RX
|
||||
// 4 TX3 PB10 UART3_TX
|
||||
// 5 SCL PE7
|
||||
// 6 SDA PC0
|
||||
|
||||
// WiFi
|
||||
// 1 +5V
|
||||
// 2 GND
|
||||
// 3 WIFI_TXD PD5 UART2_RX
|
||||
// 4 WIFI_RXD PD6 UART2_TX
|
||||
// 5 WIFI_RST PC14
|
||||
// 6 WIFI_CS PC15
|
||||
//=============================================================================
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PB9
|
||||
//#define SERVO1_PIN PB8
|
||||
#define SERVO2_PIN PB7
|
||||
#define SERVO3_PIN PB6
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PC13
|
||||
#define Y_MIN_PIN PE3
|
||||
#define Z_MIN_PIN PD7
|
||||
#define X_MAX_PIN PD8
|
||||
#define Y_MAX_PIN PB14
|
||||
#define Z_MAX_PIN PB13
|
||||
|
||||
#ifdef OPTION_Z2_ENDSTOP
|
||||
#define Z2_MIN_PIN PD1
|
||||
#define Z2_MAX_PIN PB12
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#if ENABLED(COREXY)
|
||||
#define X_ENABLE_PIN PE0
|
||||
#define X_STEP_PIN PE1
|
||||
#define X_DIR_PIN PE2
|
||||
|
||||
#define Y_ENABLE_PIN PE6
|
||||
#define Y_STEP_PIN PE5
|
||||
#define Y_DIR_PIN PE4
|
||||
#else
|
||||
#define X_ENABLE_PIN PE6
|
||||
#define X_STEP_PIN PE5
|
||||
#define X_DIR_PIN PE4
|
||||
|
||||
#define Y_ENABLE_PIN PE0
|
||||
#define Y_STEP_PIN PE1
|
||||
#define Y_DIR_PIN PE2
|
||||
#endif
|
||||
|
||||
#define Z_ENABLE_PIN PD2
|
||||
#define Z_STEP_PIN PD3
|
||||
#define Z_DIR_PIN PD4
|
||||
|
||||
#ifdef OPTION_DUALZ_DRIVE
|
||||
#define Z2_ENABLE_PIN PC11
|
||||
#define Z2_STEP_PIN PC12
|
||||
#define Z2_DIR_PIN PD0
|
||||
#endif
|
||||
|
||||
#ifdef OPTION_REPEAT_PRINTING
|
||||
#define REPRINT_STOP_PIN PD8 // X_MAX_PIN
|
||||
#define FORWARD_PIN PA13
|
||||
#define BACK_PIN PA14
|
||||
#endif
|
||||
|
||||
#ifdef SWITCH_EXTRUDER_SEQUENCE
|
||||
#define E3_ENABLE_PIN PC10
|
||||
#define E3_STEP_PIN PA8
|
||||
#define E3_DIR_PIN PC9
|
||||
|
||||
#define E2_STEP_PIN PC6
|
||||
#define E2_DIR_PIN PD15
|
||||
#define E2_ENABLE_PIN PC7
|
||||
|
||||
#define E1_STEP_PIN PD13
|
||||
#define E1_DIR_PIN PD12
|
||||
#define E1_ENABLE_PIN PD14
|
||||
|
||||
#define E0_STEP_PIN PD10
|
||||
#define E0_DIR_PIN PD9
|
||||
#define E0_ENABLE_PIN PD11
|
||||
#else
|
||||
#define E0_ENABLE_PIN PC10
|
||||
#define E0_STEP_PIN PA8
|
||||
#define E0_DIR_PIN PC9
|
||||
|
||||
#define E1_STEP_PIN PC6
|
||||
#define E1_DIR_PIN PD15
|
||||
#define E1_ENABLE_PIN PC7
|
||||
|
||||
#define E2_STEP_PIN PD13
|
||||
#define E2_DIR_PIN PD12
|
||||
#define E2_ENABLE_PIN PD14
|
||||
|
||||
#define E3_STEP_PIN PD10
|
||||
#define E3_DIR_PIN PD9
|
||||
#define E3_ENABLE_PIN PD11
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC2 // TH0
|
||||
//#define TEMP_1_PIN PC1 // TH1
|
||||
#define TEMP_BED_PIN PC3 // TB1
|
||||
|
||||
//
|
||||
// Heaters
|
||||
//
|
||||
#define HEATER_0_PIN PC5 // HEATER0
|
||||
//#define HEATER_1_PIN PB0 // HEATER1
|
||||
#define HEATER_BED_PIN PA2 // HOT BED
|
||||
|
||||
//
|
||||
// Fans
|
||||
//
|
||||
#define FAN_PIN PB1 // FAN1
|
||||
#define FAN1_PIN PB8 // FAN2
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
//#define POWER_LOSS_PIN PB15
|
||||
#define LED_PIN PA0
|
||||
#define SUICIDE_PIN PA3
|
||||
#define FIL_RUNOUT_PIN PC8
|
||||
|
||||
//
|
||||
// SD card
|
||||
//
|
||||
#define ENABLE_SPI1
|
||||
#define SD_DETECT_PIN PC4
|
||||
#define SD_SCK_PIN PA5
|
||||
#define SD_MISO_PIN PA6
|
||||
#define SD_MOSI_PIN PA7
|
||||
#define SD_SS_PIN PA4
|
||||
|
||||
// WiFi Functions
|
||||
#define WIFI_RST PC15
|
||||
#define WIFI_EN PC14
|
||||
|
||||
#if ENABLED(ZONESTAR_12864LCD)
|
||||
#define LCDSCREEN_NAME "ZONESTAR LCD12864"
|
||||
#define LCD_PINS_RS EXP1_08_PIN // 7 CS make sure for zonestar zm3e4!
|
||||
#define LCD_PINS_ENABLE EXP1_05_PIN // 6 DATA make sure for zonestar zm3e4!
|
||||
#define LCD_PINS_D4 EXP1_07_PIN // 8 SCK make sure for zonestar zm3e4!
|
||||
#define BEEPER_PIN EXP1_09_PIN
|
||||
#define KILL_PIN -1 // EXP1_10_PIN
|
||||
#define BTN_EN1 EXP1_06_PIN
|
||||
#define BTN_EN2 EXP1_03_PIN
|
||||
#define BTN_ENC EXP1_04_PIN
|
||||
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define LCDSCREEN_NAME "REPRAPDISCOUNT LCD12864"
|
||||
#define LCD_PINS_RS EXP2_08_PIN // 7 CS make sure for zonestar zm3e4!
|
||||
#define LCD_PINS_ENABLE EXP2_05_PIN // 6 DATA make sure for zonestar zm3e4!
|
||||
#define LCD_PINS_D4 EXP2_07_PIN // 8 SCK make sure for zonestar zm3e4!
|
||||
#define BEEPER_PIN EXP2_10_PIN
|
||||
#define KILL_PIN EXP2_09_PIN
|
||||
#define BTN_EN1 EXP2_03_PIN
|
||||
#define BTN_EN2 EXP2_06_PIN
|
||||
#define BTN_ENC EXP2_04_PIN
|
||||
#elif ENABLED(ZONESTAR_DWIN_LCD)
|
||||
// Connect to EXP2 connector
|
||||
#define LCDSCREEN_NAME "ZONESTAR DWIN LCD"
|
||||
#define BEEPER_PIN EXP2_06_PIN // PE11
|
||||
#define KILL_PIN -1 // EXP1_10_PIN
|
||||
#define BTN_EN2 EXP2_04_PIN // PE8
|
||||
#define BTN_EN1 EXP2_03_PIN // PE14
|
||||
#define BTN_ENC EXP2_05_PIN // PE15
|
||||
#endif
|
||||
|
||||
#if HAS_MARLINUI_U8GLIB
|
||||
#define BOARD_ST7920_DELAY_1 DELAY_NS(200) // Tclk_fall <200ns
|
||||
#define BOARD_ST7920_DELAY_2 DELAY_NS(250) // Tdata_width >200ns
|
||||
#define BOARD_ST7920_DELAY_3 DELAY_NS(200) // Tclk_rise <200ns
|
||||
#endif
|
||||
|
||||
// Remap SERVO0 PIN for BLTouch
|
||||
#if ENABLED(BLTOUCH_ON_EXP1)
|
||||
// BLTouch connected to EXP1
|
||||
#define BLTOUCH_PROBE_PIN EXP1_06_PIN
|
||||
#define BLTOUCH_GND_PIN EXP1_04_PIN
|
||||
#undef SERVO0_PIN
|
||||
#define SERVO0_PIN EXP1_03_PIN
|
||||
#elif ENABLED(BLTOUCH_ON_EXP2)
|
||||
// BLTouch connected to EXP2
|
||||
#define BLTOUCH_PROBE_PIN EXP2_03_PIN
|
||||
#define BLTOUCH_GND_PIN EXP2_04_PIN
|
||||
#undef SERVO0_PIN
|
||||
#define SERVO0_PIN EXP2_06_PIN
|
||||
#else
|
||||
#define BLTOUCH_PROBE_PIN PB13 // Z1_MAX
|
||||
#endif
|
||||
@ -0,0 +1,14 @@
|
||||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
|
||||
rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K - 4K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
@ -0,0 +1,14 @@
|
||||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
|
||||
rom (rx) : ORIGIN = 0x08005000, LENGTH = 512K - 20K - 4K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
@ -0,0 +1,14 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for STM32F103VE_ZM3E4V2_USB
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_ZONESTAR_ZM3E4V2 SERIAL_PORT 1
|
||||
exec_test $1 $2 "Zonestar ZM3E4 V2.0" "$3"
|
||||
|
||||
# cleanup
|
||||
restore_configs
|
||||
Loading…
Reference in New Issue