From 3921369f98f39280800b1c9944677e9644278106 Mon Sep 17 00:00:00 2001 From: ellensp Date: Sun, 24 Jan 2021 19:43:23 +1300 Subject: [PATCH] MeatPack serial encoding (#20802) Co-authored-by: Scott Lahteine --- Marlin/Configuration_adv.h | 2 + Marlin/src/feature/meatpack.cpp | 254 ++++++++++++++++++++++++++++++++ Marlin/src/feature/meatpack.h | 124 ++++++++++++++++ Marlin/src/gcode/host/M115.cpp | 3 + Marlin/src/gcode/queue.cpp | 169 +++++++++++---------- Marlin/src/inc/SanityCheck.h | 8 + buildroot/tests/FYSETC_S6-tests | 1 + platformio.ini | 4 +- 8 files changed, 487 insertions(+), 78 deletions(-) create mode 100644 Marlin/src/feature/meatpack.cpp create mode 100644 Marlin/src/feature/meatpack.h diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 714150d240..604bbb9359 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -3298,6 +3298,8 @@ //#define GCODE_QUOTED_STRINGS // Support for quoted string parameters #endif +//#define MEATPACK // Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack) + //#define GCODE_CASE_INSENSITIVE // Accept G-code sent to the firmware in lowercase //#define REPETIER_GCODE_M360 // Add commands originally from Repetier FW diff --git a/Marlin/src/feature/meatpack.cpp b/Marlin/src/feature/meatpack.cpp new file mode 100644 index 0000000000..ea14b44c46 --- /dev/null +++ b/Marlin/src/feature/meatpack.cpp @@ -0,0 +1,254 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * MeatPack G-code Compression + * + * Algorithm & Implementation: Scott Mudge - mail@scottmudge.com + * Date: Dec. 2020 + * + * Character Frequencies from ~30 MB of comment-stripped gcode: + * '1' -> 4451136 '4' -> 1353273 '\n' -> 1087683 '-' -> 90242 + * '0' -> 4253577 '9' -> 1352147 'G' -> 1075806 'Z' -> 34109 + * ' ' -> 3053297 '3' -> 1262929 'X' -> 975742 'M' -> 11879 + * '.' -> 3035310 '5' -> 1189871 'E' -> 965275 'S' -> 9910 + * '2' -> 1523296 '6' -> 1127900 'Y' -> 965274 + * '8' -> 1366812 '7' -> 1112908 'F' -> 99416 + * + * When space is omitted the letter 'E' is used in its place + */ + +#include "../inc/MarlinConfig.h" + +#if ENABLED(MEATPACK) + +#include "meatpack.h" +MeatPack meatpack; + +#define MeatPack_ProtocolVersion "PV01" +//#define MEATPACK_LOOKUP_TABLE +//#define MP_DEBUG + +#define DEBUG_OUT ENABLED(MP_DEBUG) +#include "../core/debug_out.h" + +bool MeatPack::cmd_is_next = false; // A command is pending +uint8_t MeatPack::state = 0; // Configuration state OFF +uint8_t MeatPack::second_char = 0; // The unpacked 2nd character from an out-of-sequence packed pair +uint8_t MeatPack::cmd_count = 0, // Counts how many command bytes are received (need 2) + MeatPack::full_char_count = 0, // Counts how many full-width characters are to be received + MeatPack::char_out_count = 0; // Stores number of characters to be read out. +uint8_t MeatPack::char_out_buf[2]; // Output buffer for caching up to 2 characters + +#if ENABLED(MEATPACK_LOOKUP_TABLE) + // The 15 most-common characters used in G-code, ~90-95% of all G-code uses these characters + // Stored in SRAM for performance. + static const uint8_t meatPackLookupTable[16] = { + '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', + '.', ' ', '\n', 'G', 'X', + '\0' // Unused. 0b1111 indicates a literal character + }; +#endif + +uint8_t MeatPack::unpacked_char(register const uint8_t in) { + #if ENABLED(MEATPACK_LOOKUP_TABLE) + + return meatPackLookupTable[in]; + + #else + + switch (in) { + case 0b0000 ... 0b1001: return '0' + in; + case 0b1010: return '.'; + case 0b1011: return (state & MPConfig_Bit_NoSpaces) ? kSpaceCharReplace : ' '; + case 0b1100: return '\n'; + case 0b1101: return 'G'; + case 0b1110: return 'X'; + } + return 0; + + #endif +} + +TERN_(MP_DEBUG, uint8_t chars_decoded = 0); // Log the first 64 bytes after each reset + +void MeatPack::reset_state() { + state = 0; + cmd_is_next = false; + second_char = 0; + cmd_count = full_char_count = char_out_count = 0; + TERN_(MP_DEBUG, chars_decoded = 0); + report_state(); +} + +/** + * Unpack one or two characters from a packed byte into a buffer. + * Return flags indicating whether any literal bytes follow. + */ +uint8_t MeatPack::unpack_chars(const uint8_t pk, uint8_t* __restrict const chars_out) { + uint8_t out = 0; + + // If lower nybble is 1111, the higher nybble is unused, and next char is full. + if ((pk & kFirstNotPacked) == kFirstNotPacked) + out = kFirstCharIsLiteral; + else { + const uint8_t chr = pk & 0x0F; + chars_out[0] = unpacked_char(chr); // Set the first char + } + + // Check if upper nybble is 1111... if so, we don't need the second char. + if ((pk & kSecondNotPacked) == kSecondNotPacked) + out |= kSecondCharIsLiteral; + else { + const uint8_t chr = (pk >> 4) & 0x0F; + chars_out[1] = unpacked_char(chr); // Set the second char + } + + return out; +} + +/** + * Interpret a single (non-command) character + * according to the current MeatPack state. + */ +void MeatPack::handle_rx_char_inner(const uint8_t c) { + if (TEST(state, MPConfig_Bit_Active)) { // Is MeatPack active? + if (!full_char_count) { // No literal characters to fetch? + uint8_t buf[2] = { 0, 0 }; + register const uint8_t res = unpack_chars(c, buf); // Decode the byte into one or two characters. + if (res & kFirstCharIsLiteral) { // The 1st character couldn't be packed. + ++full_char_count; // So the next stream byte is a full character. + if (res & kSecondCharIsLiteral) ++full_char_count; // The 2nd character couldn't be packed. Another stream byte is a full character. + else second_char = buf[1]; // Retain the unpacked second character. + } + else { + handle_output_char(buf[0]); // Send the unpacked first character out. + if (buf[0] != '\n') { // After a newline the next char won't be set + if (res & kSecondCharIsLiteral) ++full_char_count; // The 2nd character couldn't be packed. The next stream byte is a full character. + else handle_output_char(buf[1]); // Send the unpacked second character out. + } + } + } + else { + handle_output_char(c); // Pass through the character that couldn't be packed... + if (second_char) { + handle_output_char(second_char); // ...and send an unpacked 2nd character, if set. + second_char = 0; + } + --full_char_count; // One literal character was consumed + } + } + else // Packing not enabled, just copy character to output + handle_output_char(c); +} + +/** + * Buffer a single output character which will be picked up in + * GCodeQueue::get_serial_commands via calls to get_result_char + */ +void MeatPack::handle_output_char(const uint8_t c) { + char_out_buf[char_out_count++] = c; + + #if ENABLED(MP_DEBUG) + if (chars_decoded < 1024) { + ++chars_decoded; + DEBUG_ECHOPGM("RB: "); + MYSERIAL.print((char)c); + DEBUG_EOL(); + } + #endif +} + +/** + * Process a MeatPack command byte to update the state. + * Report the new state to serial. + */ +void MeatPack::handle_command(const MeatPack_Command c) { + switch (c) { + case MPCommand_EnablePacking: SBI(state, MPConfig_Bit_Active); DEBUG_ECHOLNPGM("[MPDBG] ENA REC"); break; + case MPCommand_DisablePacking: CBI(state, MPConfig_Bit_Active); DEBUG_ECHOLNPGM("[MPDBG] DIS REC"); break; + case MPCommand_TogglePacking: TBI(state, MPConfig_Bit_Active); DEBUG_ECHOLNPGM("[MPDBG] TGL REC"); break; + case MPCommand_ResetAll: reset_state(); DEBUG_ECHOLNPGM("[MPDBG] RESET REC"); break; + case MPCommand_EnableNoSpaces: SBI(state, MPConfig_Bit_NoSpaces); DEBUG_ECHOLNPGM("[MPDBG] ENA NSP"); + TERN_(USE_LOOKUP_TABLE, MeatPackLookupTbl[kSpaceCharIdx] = kSpaceCharReplace); + break; + case MPCommand_DisableNoSpaces: CBI(state, MPConfig_Bit_NoSpaces); DEBUG_ECHOLNPGM("[MPDBG] DIS NSP"); + TERN_(USE_LOOKUP_TABLE, MeatPackLookupTbl[kSpaceCharIdx] = ' '); + break; + default: DEBUG_ECHOLNPGM("[MPDBG] UNK CMD REC"); + case MPCommand_QueryConfig: break; + } + report_state(); +} + +void MeatPack::report_state() { + // NOTE: if any configuration vars are added below, the outgoing sync text for host plugin + // should not contain the "PV' substring, as this is used to indicate protocol version + SERIAL_ECHOPGM("[MP] "); + SERIAL_ECHOPGM(MeatPack_ProtocolVersion); + serialprint_onoff(TEST(state, MPConfig_Bit_Active)); + SERIAL_CHAR(' '); + serialprintPGM(TEST(state, MPConfig_Bit_NoSpaces) ? PSTR("NSP") : PSTR("ESP")); + SERIAL_EOL(); +} + +/** + * Interpret a single character received from serial + * according to the current meatpack state. + */ +void MeatPack::handle_rx_char(const uint8_t c) { + if (c == kCommandByte) { // A command (0xFF) byte? + if (cmd_count) { // In fact, two in a row? + cmd_is_next = true; // Then a MeatPack command follows + cmd_count = 0; + } + else + ++cmd_count; // cmd_count = 1 // One command byte received so far... + return; + } + + if (cmd_is_next) { // Were two command bytes received? + handle_command((MeatPack_Command)c); // Then the byte is a MeatPack command + cmd_is_next = false; + return; + } + + if (cmd_count) { // Only a single 0xFF was received + handle_rx_char_inner(kCommandByte); // A single 0xFF is passed on literally so it can be interpreted as kFirstNotPacked|kSecondNotPacked + cmd_count = 0; + } + + handle_rx_char_inner(c); // Other characters are passed on for MeatPack decoding +} + +uint8_t MeatPack::get_result_char(char* const __restrict out) { + uint8_t res = 0; + if (char_out_count) { + res = char_out_count; + char_out_count = 0; + for (register uint8_t i = 0; i < res; ++i) + out[i] = (char)char_out_buf[i]; + } + return res; +} + +#endif // MEATPACK diff --git a/Marlin/src/feature/meatpack.h b/Marlin/src/feature/meatpack.h new file mode 100644 index 0000000000..b89f87844f --- /dev/null +++ b/Marlin/src/feature/meatpack.h @@ -0,0 +1,124 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/* + * MeatPack G-code Compression + * + * Algorithm & Implementation: Scott Mudge - mail@scottmudge.com + * Date: Dec. 2020 + * + * Specifically optimized for 3D printing G-Code, this is a zero-cost data compression method + * which packs ~180-190% more data into the same amount of bytes going to the CNC controller. + * As a majority of G-Code can be represented by a restricted alphabet, I performed histogram + * analysis on a wide variety of 3D printing gcode samples, and found ~93% of all gcode could + * be represented by the same 15-character alphabet. + * + * This allowed me to design a system of packing 2 8-bit characters into a single byte, assuming + * they fall within this limited 15-character alphabet. Using a 4-bit lookup table, these 8-bit + * characters can be represented by a 4-bit index. + * + * Combined with some logic to allow commingling of full-width characters outside of this 15- + * character alphabet (at the cost of an extra 8-bits per full-width character), and by stripping + * out unnecessary comments, the end result is gcode which is roughly half the original size. + * + * Why did I do this? I noticed micro-stuttering and other data-bottleneck issues while printing + * objects with high curvature, especially at high speeds. There is also the issue of the limited + * baud rate provided by Prusa's Atmega2560-based boards, over the USB serial connection. So soft- + * ware like OctoPrint would also suffer this same micro-stuttering and poor print quality issue. + * + */ +#pragma once + +#include + +/** + * Commands sent to MeatPack to control its behavior. + * They are sent by first sending 2x MeatPack_CommandByte (0xFF) in sequence, + * followed by one of the command bytes below. + * Provided that 0xFF is an exceedingly rare character that is virtually never + * present in G-code naturally, it is safe to assume 2 in sequence should never + * happen naturally, and so it is used as a signal here. + * + * 0xFF *IS* used in "packed" G-code (used to denote that the next 2 characters are + * full-width), however 2 in a row will never occur, as the next 2 bytes will always + * some non-0xFF character. + */ +enum MeatPack_Command : uint8_t { + MPCommand_None = 0, + MPCommand_TogglePacking = 0xFD, + MPCommand_EnablePacking = 0xFB, + MPCommand_DisablePacking = 0xFA, + MPCommand_ResetAll = 0xF9, + MPCommand_QueryConfig = 0xF8, + MPCommand_EnableNoSpaces = 0xF7, + MPCommand_DisableNoSpaces = 0xF6 +}; + +enum MeatPack_ConfigStateBits : uint8_t { + MPConfig_Bit_Active = 0, + MPConfig_Bit_NoSpaces = 1 +}; + +class MeatPack { +private: + friend class GCodeQueue; + + // Utility definitions + static const uint8_t kCommandByte = 0b11111111, + kFirstNotPacked = 0b00001111, + kSecondNotPacked = 0b11110000, + kFirstCharIsLiteral = 0b00000001, + kSecondCharIsLiteral = 0b00000010; + + static const uint8_t kSpaceCharIdx = 11; + static const char kSpaceCharReplace = 'E'; + + static bool cmd_is_next; // A command is pending + static uint8_t state; // Configuration state + static uint8_t second_char; // Buffers a character if dealing with out-of-sequence pairs + static uint8_t cmd_count, // Counter of command bytes received (need 2) + full_char_count, // Counter for full-width characters to be received + char_out_count; // Stores number of characters to be read out. + static uint8_t char_out_buf[2]; // Output buffer for caching up to 2 characters + + // Pass in a character rx'd by SD card or serial. Automatically parses command/ctrl sequences, + // and will control state internally. + static void handle_rx_char(const uint8_t c); + + /** + * After passing in rx'd char using above method, call this to get characters out. + * Can return from 0 to 2 characters at once. + * @param out [in] Output pointer for unpacked/processed data. + * @return Number of characters returned. Range from 0 to 2. + */ + static uint8_t get_result_char(char* const __restrict out); + + static void reset_state(); + static void report_state(); + static uint8_t unpacked_char(register const uint8_t in); + static uint8_t unpack_chars(const uint8_t pk, uint8_t* __restrict const chars_out); + static void handle_command(const MeatPack_Command c); + static void handle_output_char(const uint8_t c); + static void handle_rx_char_inner(const uint8_t c); +}; + +extern MeatPack meatpack; diff --git a/Marlin/src/gcode/host/M115.cpp b/Marlin/src/gcode/host/M115.cpp index 63511b606d..1b088e7d34 100644 --- a/Marlin/src/gcode/host/M115.cpp +++ b/Marlin/src/gcode/host/M115.cpp @@ -141,6 +141,9 @@ void GcodeSuite::M115() { // CHAMBER_TEMPERATURE (M141, M191) cap_line(PSTR("CHAMBER_TEMPERATURE"), ENABLED(HAS_HEATED_CHAMBER)); + // MEATPACK Compresson + cap_line(PSTR("MEATPACK"), ENABLED(MEATPACK)); + // Machine Geometry #if ENABLED(M115_GEOMETRY_REPORT) const xyz_pos_t dmin = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }, diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp index 9e626bd235..51fec7d41c 100644 --- a/Marlin/src/gcode/queue.cpp +++ b/Marlin/src/gcode/queue.cpp @@ -48,6 +48,10 @@ GCodeQueue queue; #include "../feature/binary_stream.h" #endif +#if ENABLED(MEATPACK) + #include "../feature/meatpack.h" +#endif + #if ENABLED(POWER_LOSS_RECOVERY) #include "../feature/powerloss.h" #endif @@ -474,98 +478,109 @@ void GCodeQueue::get_serial_commands() { const int c = read_serial(i); if (c < 0) continue; - const char serial_char = c; + #if ENABLED(MEATPACK) + meatpack.handle_rx_char(uint8_t(c)); + char c_res[2] = { 0, 0 }; + const uint8_t char_count = meatpack.get_result_char(c_res); + #else + constexpr uint8_t char_count = 1; + #endif - if (ISEOL(serial_char)) { + LOOP_L_N(char_index, char_count) { + const char serial_char = TERN(MEATPACK, c_res[char_index], c); - // Reset our state, continue if the line was empty - if (process_line_done(serial_input_state[i], serial_line_buffer[i], serial_count[i])) - continue; + if (ISEOL(serial_char)) { - char* command = serial_line_buffer[i]; + // Reset our state, continue if the line was empty + if (process_line_done(serial_input_state[i], serial_line_buffer[i], serial_count[i])) + continue; - while (*command == ' ') command++; // Skip leading spaces - char *npos = (*command == 'N') ? command : nullptr; // Require the N parameter to start the line + char* command = serial_line_buffer[i]; - if (npos) { + while (*command == ' ') command++; // Skip leading spaces + char *npos = (*command == 'N') ? command : nullptr; // Require the N parameter to start the line - const bool M110 = !!strstr_P(command, PSTR("M110")); + if (npos) { - if (M110) { - char* n2pos = strchr(command + 4, 'N'); - if (n2pos) npos = n2pos; + const bool M110 = !!strstr_P(command, PSTR("M110")); + + if (M110) { + char* n2pos = strchr(command + 4, 'N'); + if (n2pos) npos = n2pos; + } + + const long gcode_N = strtol(npos + 1, nullptr, 10); + + if (gcode_N != last_N[i] + 1 && !M110) + return gcode_line_error(PSTR(STR_ERR_LINE_NO), i); + + char *apos = strrchr(command, '*'); + if (apos) { + uint8_t checksum = 0, count = uint8_t(apos - command); + while (count) checksum ^= command[--count]; + if (strtol(apos + 1, nullptr, 10) != checksum) + return gcode_line_error(PSTR(STR_ERR_CHECKSUM_MISMATCH), i); + } + else + return gcode_line_error(PSTR(STR_ERR_NO_CHECKSUM), i); + + last_N[i] = gcode_N; } + #if ENABLED(SDSUPPORT) + // Pronterface "M29" and "M29 " has no line number + else if (card.flag.saving && !is_M29(command)) + return gcode_line_error(PSTR(STR_ERR_NO_CHECKSUM), i); + #endif - const long gcode_N = strtol(npos + 1, nullptr, 10); + // + // Movement commands give an alert when the machine is stopped + // - if (gcode_N != last_N[i] + 1 && !M110) - return gcode_line_error(PSTR(STR_ERR_LINE_NO), i); - - char *apos = strrchr(command, '*'); - if (apos) { - uint8_t checksum = 0, count = uint8_t(apos - command); - while (count) checksum ^= command[--count]; - if (strtol(apos + 1, nullptr, 10) != checksum) - return gcode_line_error(PSTR(STR_ERR_CHECKSUM_MISMATCH), i); - } - else - return gcode_line_error(PSTR(STR_ERR_NO_CHECKSUM), i); - - last_N[i] = gcode_N; - } - #if ENABLED(SDSUPPORT) - // Pronterface "M29" and "M29 " has no line number - else if (card.flag.saving && !is_M29(command)) - return gcode_line_error(PSTR(STR_ERR_NO_CHECKSUM), i); - #endif - - // - // Movement commands give an alert when the machine is stopped - // - - if (IsStopped()) { - char* gpos = strchr(command, 'G'); - if (gpos) { - switch (strtol(gpos + 1, nullptr, 10)) { - case 0: case 1: - #if ENABLED(ARC_SUPPORT) - case 2: case 3: - #endif - #if ENABLED(BEZIER_CURVE_SUPPORT) - case 5: - #endif - PORT_REDIRECT(i); // Reply to the serial port that sent the command - SERIAL_ECHOLNPGM(STR_ERR_STOPPED); - LCD_MESSAGEPGM(MSG_STOPPED); - break; + if (IsStopped()) { + char* gpos = strchr(command, 'G'); + if (gpos) { + switch (strtol(gpos + 1, nullptr, 10)) { + case 0: case 1: + #if ENABLED(ARC_SUPPORT) + case 2: case 3: + #endif + #if ENABLED(BEZIER_CURVE_SUPPORT) + case 5: + #endif + PORT_REDIRECT(i); // Reply to the serial port that sent the command + SERIAL_ECHOLNPGM(STR_ERR_STOPPED); + LCD_MESSAGEPGM(MSG_STOPPED); + break; + } } } - } - #if DISABLED(EMERGENCY_PARSER) - // Process critical commands early - if (command[0] == 'M') switch (command[3]) { - case '8': if (command[2] == '0' && command[1] == '1') { wait_for_heatup = false; TERN_(HAS_LCD_MENU, wait_for_user = false); } break; - case '2': if (command[2] == '1' && command[1] == '1') kill(M112_KILL_STR, nullptr, true); break; - case '0': if (command[1] == '4' && command[2] == '1') quickstop_stepper(); break; - } - #endif - - #if defined(NO_TIMEOUTS) && NO_TIMEOUTS > 0 - last_command_time = ms; - #endif - - // Add the command to the queue - _enqueue(serial_line_buffer[i], true - #if HAS_MULTI_SERIAL - , i + #if DISABLED(EMERGENCY_PARSER) + // Process critical commands early + if (command[0] == 'M') switch (command[3]) { + case '8': if (command[2] == '0' && command[1] == '1') { wait_for_heatup = false; TERN_(HAS_LCD_MENU, wait_for_user = false); } break; + case '2': if (command[2] == '1' && command[1] == '1') kill(M112_KILL_STR, nullptr, true); break; + case '0': if (command[1] == '4' && command[2] == '1') quickstop_stepper(); break; + } #endif - ); - } - else - process_stream_char(serial_char, serial_input_state[i], serial_line_buffer[i], serial_count[i]); - } // for NUM_SERIAL + #if defined(NO_TIMEOUTS) && NO_TIMEOUTS > 0 + last_command_time = ms; + #endif + + // Add the command to the queue + _enqueue(serial_line_buffer[i], true + #if HAS_MULTI_SERIAL + , i + #endif + ); + } + else + process_stream_char(serial_char, serial_input_state[i], serial_line_buffer[i], serial_count[i]); + + } // char_count loop + + } // NUM_SERIAL loop } // queue has space, serial has data } diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 95210d4527..1f7b317917 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -3303,6 +3303,14 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #endif #endif + +/** + * Sanity Check for MEATPACK and BINARY_FILE_TRANSFER Features + */ +#if BOTH(MEATPACK, BINARY_FILE_TRANSFER) + #error "Either enable MEATPACK or enable BINARY_FILE_TRANSFER." +#endif + /** * Sanity check for valid stepper driver types */ diff --git a/buildroot/tests/FYSETC_S6-tests b/buildroot/tests/FYSETC_S6-tests index 18951ebb79..c7f7a16bbd 100755 --- a/buildroot/tests/FYSETC_S6-tests +++ b/buildroot/tests/FYSETC_S6-tests @@ -9,6 +9,7 @@ set -e # Build examples restore_configs use_example_configs FYSETC/S6 +opt_enable MEATPACK opt_set Y_DRIVER_TYPE TMC2209 opt_set Z_DRIVER_TYPE TMC2130 exec_test $1 $2 "FYSETC S6 Example" "$3" diff --git a/platformio.ini b/platformio.ini index 822f1df8d1..11248d7650 100644 --- a/platformio.ini +++ b/platformio.ini @@ -97,6 +97,7 @@ default_src_filter = + - - + - - - + - - - - - @@ -319,6 +320,7 @@ PCA9632 = src_filter=+ PRINTER_EVENT_LEDS = src_filter=+ TEMP_STAT_LEDS = src_filter=+ MAX7219_DEBUG = src_filter=+ + +MEATPACK = src_filter=+ MIXING_EXTRUDER = src_filter=+ + HAS_PRUSA_MMU1 = src_filter=+ HAS_PRUSA_MMU2 = src_filter=+ + @@ -706,7 +708,7 @@ extra_scripts = ${common.extra_scripts} src_filter = ${common.default_src_filter} + + lib_deps = ${common.lib_deps} Servo -custom_marlin.USES_LIQUIDCRYSTAL = LiquidCrystal@1.0.0 +custom_marlin.USES_LIQUIDCRYSTAL = LiquidCrystal~1.0.7 custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip build_flags = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g # debug options for backtrace