From 34b73426e5514fe33816c7237fb9170ba2197239 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 1 Sep 2019 23:54:41 -0500 Subject: [PATCH] Apply #ifdef/#ifndef where possible --- Marlin/src/HAL/HAL_DUE/usb/compiler.h | 6 +-- Marlin/src/HAL/HAL_DUE/usb/osc.h | 10 ++-- Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h | 6 +-- Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h | 2 +- Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h | 2 +- Marlin/src/HAL/HAL_STM32F1/SPI.h | 2 +- Marlin/src/inc/SanityCheck.h | 2 +- .../lulzbot/ftdi_eve_lib/basic/ftdi_basic.h | 2 +- .../lib/lulzbot/ftdi_eve_lib/basic/spi.cpp | 12 ++--- .../lib/lulzbot/ftdi_eve_lib/basic/spi.h | 4 +- .../lib/lulzbot/ftdi_eve_lib/compat.h | 2 +- .../ftdi_eve_lib/extended/ftdi_extended.h | 2 +- .../lib/lulzbot/screens/screens.h | 2 +- Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h | 2 +- Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h | 2 +- .../src/sd/usb_flashdrive/lib-uhs2/settings.h | 2 +- .../UHS_BULK_STORAGE/UHS_BULK_STORAGE.h | 2 +- .../lib-uhs3/UHS_host/UHS_UsbCore.h | 4 +- .../lib-uhs3/UHS_host/UHS_address.h | 2 +- .../lib-uhs3/UHS_host/UHS_host.h | 16 +++---- .../lib-uhs3/UHS_host/UHS_macros.h | 20 ++++---- .../lib-uhs3/UHS_host/UHS_printf_HELPER.h | 14 +++--- .../lib-uhs3/UHS_host/UHS_usbhost.h | 12 ++--- .../USB_HOST_SHIELD/USB_HOST_SHIELD.h | 46 +++++++++---------- .../USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h | 14 +++--- .../lib-uhs3/UHS_host/macro_logic.h | 2 +- .../lib-uhs3/dyn_SWI/SWI_INLINE.h | 32 ++++++------- .../usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h | 18 ++++---- .../stm32f4xx_hal_conf.h | 16 +++---- .../MARLIN_F407VE/stm32f4xx_hal_conf.h | 16 +++---- .../Alfawise/U20-bltouch/Configuration.h | 4 +- config/examples/Alfawise/U20/Configuration.h | 4 +- 32 files changed, 141 insertions(+), 141 deletions(-) diff --git a/Marlin/src/HAL/HAL_DUE/usb/compiler.h b/Marlin/src/HAL/HAL_DUE/usb/compiler.h index cecdd256f0..7719c129c3 100644 --- a/Marlin/src/HAL/HAL_DUE/usb/compiler.h +++ b/Marlin/src/HAL/HAL_DUE/usb/compiler.h @@ -230,7 +230,7 @@ /* Define NO_INIT attribute */ #if 0 //ndef NO_INIT -#if defined ( __CC_ARM ) +#ifdef __CC_ARM # define NO_INIT __attribute__((zero_init)) #elif defined ( __ICCARM__ ) # define NO_INIT __no_init @@ -262,7 +262,7 @@ //! @{ typedef unsigned char Bool; //!< Boolean. #ifndef __cplusplus -#if !defined(__bool_true_false_are_defined) +#ifndef __bool_true_false_are_defined typedef unsigned char bool; //!< Boolean. #endif #endif @@ -443,7 +443,7 @@ typedef struct #define DISABLE 0 #define ENABLE 1 #ifndef __cplusplus -#if !defined(__bool_true_false_are_defined) +#ifndef __bool_true_false_are_defined #define false 0 #define true 1 #endif diff --git a/Marlin/src/HAL/HAL_DUE/usb/osc.h b/Marlin/src/HAL/HAL_DUE/usb/osc.h index fe09d6fd3e..3a9543507b 100644 --- a/Marlin/src/HAL/HAL_DUE/usb/osc.h +++ b/Marlin/src/HAL/HAL_DUE/usb/osc.h @@ -61,27 +61,27 @@ extern "C" { * Below BOARD_XXX macros are related to the specific board, and * should be defined by the board code, otherwise default value are used. */ -#if !defined(BOARD_FREQ_SLCK_XTAL) +#ifndef BOARD_FREQ_SLCK_XTAL # warning The board slow clock xtal frequency has not been defined. # define BOARD_FREQ_SLCK_XTAL (32768UL) #endif -#if !defined(BOARD_FREQ_SLCK_BYPASS) +#ifndef BOARD_FREQ_SLCK_BYPASS # warning The board slow clock bypass frequency has not been defined. # define BOARD_FREQ_SLCK_BYPASS (32768UL) #endif -#if !defined(BOARD_FREQ_MAINCK_XTAL) +#ifndef BOARD_FREQ_MAINCK_XTAL # warning The board main clock xtal frequency has not been defined. # define BOARD_FREQ_MAINCK_XTAL (12000000UL) #endif -#if !defined(BOARD_FREQ_MAINCK_BYPASS) +#ifndef BOARD_FREQ_MAINCK_BYPASS # warning The board main clock bypass frequency has not been defined. # define BOARD_FREQ_MAINCK_BYPASS (12000000UL) #endif -#if !defined(BOARD_OSC_STARTUP_US) +#ifndef BOARD_OSC_STARTUP_US # warning The board main clock xtal startup time has not been defined. # define BOARD_OSC_STARTUP_US (15625UL) #endif diff --git a/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h b/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h index e5e7603c9a..6fadb9f36c 100644 --- a/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h +++ b/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h @@ -43,12 +43,12 @@ * \asf_license_stop * */ + /* * Support and FAQ: visit Atmel Support */ -#ifndef _SPC_PROTOCOL_H_ -#define _SPC_PROTOCOL_H_ - +#ifndef _SPC_PROTOCOL_H_ +#define _SPC_PROTOCOL_H_ /** * \ingroup usb_msc_protocol diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h index 45c5cef5ae..526419c860 100644 --- a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h +++ b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h @@ -55,7 +55,7 @@ #include "udi.h" // Check the number of port -#ifndef UDI_CDC_PORT_NB +#ifndef UDI_CDC_PORT_NB # define UDI_CDC_PORT_NB 1 #endif #if (UDI_CDC_PORT_NB < 1) || (UDI_CDC_PORT_NB > 7) diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h index b99d611171..cbd3eb00ae 100644 --- a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h +++ b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc_conf.h @@ -50,7 +50,7 @@ #include "usb_protocol_cdc.h" #include "conf_usb.h" -#ifndef UDI_CDC_PORT_NB +#ifndef UDI_CDC_PORT_NB # define UDI_CDC_PORT_NB 1 #endif diff --git a/Marlin/src/HAL/HAL_STM32F1/SPI.h b/Marlin/src/HAL/HAL_STM32F1/SPI.h index 1e77bf1066..4f6841697a 100644 --- a/Marlin/src/HAL/HAL_STM32F1/SPI.h +++ b/Marlin/src/HAL/HAL_STM32F1/SPI.h @@ -58,7 +58,7 @@ #define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR // define SPI_AVR_EIMSK for AVR boards with external interrupt pins -#if defined(EIMSK) +#ifdef EIMSK #define SPI_AVR_EIMSK EIMSK #elif defined(GICR) #define SPI_AVR_EIMSK GICR diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 66db197ecd..0f4de7e8c5 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -892,7 +892,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS * Switching Toolhead requirements */ #if ENABLED(SWITCHING_TOOLHEAD) - #if !defined(SWITCHING_TOOLHEAD_SERVO_NR) + #ifndef SWITCHING_TOOLHEAD_SERVO_NR #error "SWITCHING_TOOLHEAD requires SWITCHING_TOOLHEAD_SERVO_NR." #elif EXTRUDERS < 2 #error "SWITCHING_TOOLHEAD requires at least 2 EXTRUDERS." diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h index 3d6541e707..e8f9f424d0 100644 --- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h @@ -24,7 +24,7 @@ #include "../compat.h" -#if !defined(__MARLIN_FIRMWARE__) +#ifndef __MARLIN_FIRMWARE__ #define FTDI_BASIC #endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp index af33b5f055..74b739aaf2 100644 --- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp @@ -27,7 +27,7 @@ /********************************* SPI Functions *********************************/ namespace FTDI { - #if !defined(CLCD_USE_SOFT_SPI) + #ifndef CLCD_USE_SOFT_SPI SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0); #endif @@ -108,7 +108,7 @@ namespace FTDI { void SPI::spi_read_bulk (void *data, uint16_t len) { uint8_t* p = (uint8_t *)data; - #if !defined(CLCD_USE_SOFT_SPI) + #ifndef CLCD_USE_SOFT_SPI ::SPI.transfer(p, len); #else while (len--) *p++ = spi_recv(); @@ -123,7 +123,7 @@ namespace FTDI { // CLCD SPI - Chip Select void SPI::spi_ftdi_select (void) { - #if !defined(CLCD_USE_SOFT_SPI) + #ifndef CLCD_USE_SOFT_SPI ::SPI.beginTransaction(spi_settings); #endif WRITE(CLCD_SPI_CS, 0); @@ -133,7 +133,7 @@ namespace FTDI { // CLCD SPI - Chip Deselect void SPI::spi_ftdi_deselect (void) { WRITE(CLCD_SPI_CS, 1); - #if !defined(CLCD_USE_SOFT_SPI) + #ifndef CLCD_USE_SOFT_SPI ::SPI.endTransaction(); #endif } @@ -141,7 +141,7 @@ namespace FTDI { #ifdef SPI_FLASH_SS // Serial SPI Flash SPI - Chip Select void SPI::spi_flash_select () { - #if !defined(CLCD_USE_SOFT_SPI) + #ifndef CLCD_USE_SOFT_SPI ::SPI.beginTransaction(spi_settings); #endif WRITE(SPI_FLASH_SS, 0); @@ -151,7 +151,7 @@ namespace FTDI { // Serial SPI Flash SPI - Chip Deselect void SPI::spi_flash_deselect () { WRITE(SPI_FLASH_SS, 1); - #if !defined(CLCD_USE_SOFT_SPI) + #ifndef CLCD_USE_SOFT_SPI ::SPI.endTransaction(); #endif } diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h index c5564eda04..18c9955a63 100644 --- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h @@ -22,13 +22,13 @@ #pragma once -#if !defined(CLCD_USE_SOFT_SPI) +#ifndef CLCD_USE_SOFT_SPI #include #endif namespace FTDI { namespace SPI { - #if !defined(CLCD_USE_SOFT_SPI) + #ifndef CLCD_USE_SOFT_SPI extern SPISettings spi_settings; #endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h index bbce85c87a..808c332769 100644 --- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h @@ -31,7 +31,7 @@ #include - #if !defined(CLCD_USE_SOFT_SPI) + #ifndef CLCD_USE_SOFT_SPI #include #endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h index 43e390c1ad..02a8738e9d 100644 --- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h @@ -25,7 +25,7 @@ #include "../compat.h" #include "../basic/ftdi_basic.h" -#if !defined(__MARLIN_FIRMWARE__) +#ifndef __MARLIN_FIRMWARE__ #define FTDI_EXTENDED #endif diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h index 2687089e85..6d50509f6f 100644 --- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h +++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h @@ -209,7 +209,7 @@ class SpinnerDialogBox : public DialogBoxBaseClass, public CachedScreen { private: static void draw_axis_position(draw_mode_t); diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 8e4bfeb8b9..bc8037da07 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -128,7 +128,7 @@ // P2_08 E1-Step // P2_13 E1-Dir - #ifndef X_SERIAL_TX_PIN + #ifndef X_SERIAL_TX_PIN #define X_SERIAL_TX_PIN P0_01 #endif #ifndef X_SERIAL_RX_PIN diff --git a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h index aa80818577..8545dc488a 100644 --- a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h +++ b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h @@ -25,7 +25,7 @@ * Z-Bolt X Series board – based on Arduino Mega2560 */ -#if !defined(__AVR_ATmega2560__) +#ifndef __AVR_ATmega2560__ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #elif HOTENDS > 4 || E_STEPPERS > 4 #error "Z-Bolt X Series board supports up to 4 hotends / E-steppers." diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h b/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h index dc7782f2a2..41821173d3 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/settings.h @@ -153,7 +153,7 @@ // define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock. // NOTE: NO argument is passed. You have to do this within your routine for // whatever you are using to lock and unlock. -#if !defined(XMEM_ACQUIRE_SPI) +#ifndef XMEM_ACQUIRE_SPI #if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API) #include #else diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h index 54458d116e..a1f84d48a2 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE.h @@ -24,7 +24,7 @@ Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ -#if !defined(__UHS_BULK_STORAGE_H__) +#ifndef __UHS_BULK_STORAGE_H__ #define __UHS_BULK_STORAGE_H__ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h index cad84fba11..190077d17c 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_UsbCore.h @@ -33,11 +33,11 @@ e-mail : support@circuitsathome.com #define UHS_HOST_MAX_INTERFACE_DRIVERS 0x10U // Default maximum number of USB interface drivers #endif -#if !defined(SYSTEM_OR_SPECIAL_YIELD) +#ifndef SYSTEM_OR_SPECIAL_YIELD #define SYSTEM_OR_SPECIAL_YIELD(...) VOID0 #endif -#if !defined(SYSTEM_OR_SPECIAL_YIELD_FROM_ISR) +#ifndef SYSTEM_OR_SPECIAL_YIELD_FROM_ISR #define SYSTEM_OR_SPECIAL_YIELD_FROM_ISR(...) SYSTEM_OR_SPECIAL_YIELD #endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h index ce60e44ec5..62d55af6f7 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_address.h @@ -226,7 +226,7 @@ public: } thePool[index].address = addr; #if DEBUG_PRINTF_EXTRA_HUGE -#if defined(UHS_DEBUG_USB_ADDRESS) +#ifdef UHS_DEBUG_USB_ADDRESS printf("Address: %x (%x.%x.%x)\r\n", addr.devAddress, addr.bmHub, addr.bmParent, addr.bmAddress); #endif #endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h index 36ca2bfc4d..7f7d18116c 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host.h @@ -58,7 +58,7 @@ e-mail : support@circuitsathome.com #include "UHS_host_INLINE.h" #include "UHS_printf_HELPER.h" -#if defined(LOAD_USB_HOST_SHIELD) +#ifdef LOAD_USB_HOST_SHIELD #include "USB_HOST_SHIELD/USB_HOST_SHIELD.h" #endif @@ -72,24 +72,24 @@ e-mail : support@circuitsathome.com // Load USB drivers and multiplexers -#if defined(LOAD_UHS_HUB) +#ifdef LOAD_UHS_HUB #include "UHS_HUB/UHS_HUB.h" #endif // HUB loaded -#if defined(LOAD_UHS_BULK_STORAGE) +#ifdef LOAD_UHS_BULK_STORAGE #include "UHS_BULK_STORAGE/UHS_BULK_STORAGE.h" #endif -#if defined(LOAD_GENERIC_STORAGE) +#ifdef LOAD_GENERIC_STORAGE #include "../UHS_FS/UHS_FS.h" #endif // Add BT and optionally HID if directed to do so -#if defined(LOAD_UHS_BT) +#ifdef LOAD_UHS_BT #include "UHS_BT/UHS_BT.h" #endif // BT and optionally HID loaded // Add HID -#if defined(LOAD_UHS_HID) +#ifdef LOAD_UHS_HID #include "UHS_HID/UHS_HID.h" #endif // HID loaded @@ -98,11 +98,11 @@ e-mail : support@circuitsathome.com #include "UHS_CDC/UHS_CDC.h" #endif // CDC loaded -#if defined(LOAD_UHS_ADK) +#ifdef LOAD_UHS_ADK #include "UHS_ADK/UHS_ADK.h" #endif -#if defined(LOAD_UHS_MIDI) +#ifdef LOAD_UHS_MIDI #include "UHS_MIDI/UHS_MIDI.h" #endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h index afa20f30d4..34eaed646b 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_macros.h @@ -24,7 +24,7 @@ Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ -#if !defined(MACROS_H) +#ifndef MACROS_H #define MACROS_H #include "macro_logic.h" /* @@ -49,18 +49,18 @@ e-mail : support@circuitsathome.com // Nuke screwed up macro junk from the IDE. #ifdef __cplusplus -#if defined(true) +#ifdef true #undef true #endif -#if defined(false) +#ifdef false #undef false #endif #endif -#if !defined(UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE) +#ifndef UHS_DEVICE_WINDOWS_USB_SPEC_VIOLATION_DESCRIPTOR_DEVICE -#if !defined(UHS_BIG_FLASH) +#ifndef UHS_BIG_FLASH #if defined(FLASHEND) && defined(FLASHSTART) #if (FLASHEND - FLASHSTART) > 0x0FFFFU @@ -122,10 +122,10 @@ e-mail : support@circuitsathome.com // TODO: Fast inline code for AVR and SAM based microcontrollers // This can be done pretty easily. // For now, this will just work out-of-the-box. -#if !defined(UHS_PIN_WRITE) +#ifndef UHS_PIN_WRITE #define UHS_PIN_WRITE(p, v) digitalWrite(p, v) #endif -#if !defined(UHS_PIN_READ) +#ifndef UHS_PIN_READ #define UHS_PIN_READ(p) digitalRead(p) #endif @@ -134,8 +134,8 @@ e-mail : support@circuitsathome.com #edfine noInterrupts() __builtin_disable_interrupts() #endif -#if !defined(ARDUINO_SAMD_ZERO) -#if defined(ARDUINO_AVR_ADK) +#ifndef ARDUINO_SAMD_ZERO +#ifdef ARDUINO_AVR_ADK #define UHS_GET_DPI(x) (x == 54 ? 6 : digitalPinToInterrupt(x)) #else #define UHS_GET_DPI(x) digitalPinToInterrupt(x) @@ -386,7 +386,7 @@ e-mail : support@circuitsathome.com #define USBTRACE2X(s,r) (USBTRACE3X((s),(r),0x80)); USB_HOST_SERIAL.flush() #define VOID0 ((void)0) -#if !defined(NOTUSED) +#ifndef NOTUSED #define NOTUSED(...) __VA_ARGS__ __attribute__((unused)) #endif #endif /* MACROS_H */ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h index c5f87739c8..f9ff21f259 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printf_HELPER.h @@ -27,7 +27,7 @@ e-mail : support@circuitsathome.com #ifndef UHS_PRINTF_HELPER_H #define UHS_PRINTF_HELPER_H -#if defined(LOAD_UHS_PRINTF_HELPER) +#ifdef LOAD_UHS_PRINTF_HELPER #include #ifdef true #undef true @@ -36,14 +36,14 @@ e-mail : support@circuitsathome.com #undef false #endif -#if !defined(STDIO_IS_OK_TO_USE_AS_IS) +#ifndef STDIO_IS_OK_TO_USE_AS_IS #if defined(ARDUINO_SAMD_ZERO) || defined(ARDUINO_SAM_DUE) || defined(ARDUINO_spresense_ast) // STDIO patching not required. #define STDIO_IS_OK_TO_USE_AS_IS #endif #endif -#if !defined(STDIO_IS_OK_TO_USE_AS_IS) +#ifndef STDIO_IS_OK_TO_USE_AS_IS // We need to patch STDIO so it can be used. #ifndef SERIAL_PORT_MONITOR @@ -64,7 +64,7 @@ e-mail : support@circuitsathome.com #endif #endif -#if !defined(NOTUSED) +#ifndef NOTUSED #define NOTUSED(...) __VA_ARGS__ __attribute__((unused)) #endif @@ -74,7 +74,7 @@ e-mail : support@circuitsathome.com #endif #endif -#if defined(ARDUINO_ARCH_PIC32) +#ifdef ARDUINO_ARCH_PIC32 /* * For printf() output with pic32 Arduino */ @@ -169,7 +169,7 @@ extern "C" { -#if defined(__AVR__) +#ifdef __AVR__ // The only wierdo in the bunch... void UHS_AVR_printf_HELPER_init(void) { // Set up stdio/stderr @@ -194,7 +194,7 @@ void UHS_AVR_printf_HELPER_init(void) { #endif /* STDIO_IS_OK_TO_USE_AS_IS */ #endif /* load.... */ -#if !defined(UHS_printf_HELPER_init) +#ifndef UHS_printf_HELPER_init #define UHS_printf_HELPER_init() (void(0)) #endif #endif /* UHS_PRINTF_HELPER_H */ diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h index 6db65c00a0..b4fd4e4dfc 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h @@ -24,19 +24,19 @@ Web : http://www.circuitsathome.com e-mail : support@circuitsathome.com */ -#if !defined(_UHS_host_h_) +#ifndef _UHS_host_h_ #error "Never include UHS_usbhost.h directly; include UHS_host.h instead" #else -#if !defined(_USBHOST_H_) +#ifndef _USBHOST_H_ #define _USBHOST_H_ // Very early prototypes -#if defined(UHS_LOAD_BT) +#ifdef UHS_LOAD_BT void UHS_BT_SetUSBInterface(UHS_USB_HOST_BASE *host, ENUMERATION_INFO *ei); void UHS_BT_ScanUninitialized(UHS_USB_HOST_BASE *host); void UHS_BT_Poll(UHS_USB_HOST_BASE *host); #endif -#if defined(UHS_LOAD_HID) +#ifdef UHS_LOAD_HID void UHS_HID_SetUSBInterface(UHS_USB_HOST_BASE *host, ENUMERATION_INFO *ei); void UHS_HID_ScanUninitialized(UHS_USB_HOST_BASE *host); void UHS_HID_Poll(UHS_USB_HOST_BASE *host); @@ -185,10 +185,10 @@ public: ///////////////////////////////////////////// // these two probably will go away, and won't be used, TBD inline void Poll_Others(void) { -#if defined(UHS_LOAD_BT) +#ifdef UHS_LOAD_BT UHS_BT_Poll(this); #endif -#if defined(UHS_LOAD_HID) +#ifdef UHS_LOAD_HID UHS_HID_Poll(this); #endif } diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h index ab80f65417..40831bca64 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD.h @@ -28,10 +28,10 @@ e-mail : support@circuitsathome.com #include -#if !defined(SPI_HAS_TRANSACTION) +#ifndef SPI_HAS_TRANSACTION #error "Your SPI library installation is too old." #else -#if !defined(SPI_ATOMIC_VERSION) +#ifndef SPI_ATOMIC_VERSION #warning "Your SPI library installation lacks 'SPI_ATOMIC_VERSION'. Please complain to the maintainer." #elif SPI_ATOMIC_VERSION < 1 #error "Your SPI library installation is too old." @@ -48,8 +48,8 @@ e-mail : support@circuitsathome.com #define MAX_HOST_DEBUG(...) VOID0 #endif -#if !defined(USB_HOST_SHIELD_USE_ISR) -#if defined(USE_MULTIPLE_APP_API) +#ifndef USB_HOST_SHIELD_USE_ISR +#ifdef USE_MULTIPLE_APP_API #define USB_HOST_SHIELD_USE_ISR 0 #else #define USB_HOST_SHIELD_USE_ISR 1 @@ -66,7 +66,7 @@ e-mail : support@circuitsathome.com // // Polled defaults // -#if defined(BOARD_BLACK_WIDDOW) +#ifdef BOARD_BLACK_WIDDOW #define UHS_MAX3421E_SS_ 6 #define UHS_MAX3421E_INT_ 3 #elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) @@ -91,7 +91,7 @@ e-mail : support@circuitsathome.com #endif #else -#if defined(ARDUINO_ARCH_PIC32) +#ifdef ARDUINO_ARCH_PIC32 // PIC32 only allows edge interrupts, isn't that lovely? We'll emulate it... #if CHANGE < 2 #error core too old. @@ -113,8 +113,8 @@ e-mail : support@circuitsathome.com #endif // More stupidity from our friends @ Sony... -#if defined(ARDUINO_spresense_ast) -#if !defined(NOT_AN_INTERRUPT) +#ifdef ARDUINO_spresense_ast +#ifndef NOT_AN_INTERRUPT #define NOT_AN_INTERRUPT -1 #endif #endif @@ -158,7 +158,7 @@ e-mail : support@circuitsathome.com #else #define UHS_MAX3421E_SS_ 10 #ifdef __AVR__ -#if defined(__AVR_ATmega32U4__) +#ifdef __AVR_ATmega32U4__ #define INT_FOR_PIN2 1 #define INT_FOR_PIN3 0 #else @@ -169,7 +169,7 @@ e-mail : support@circuitsathome.com #define UHS_MAX3421E_INT_ 3 #else // Non-avr -#if defined(ARDUINO_ARCH_PIC32) +#ifdef ARDUINO_ARCH_PIC32 // UNO32 External Interrupts: // Pin 38 (INT0), Pin 2 (INT1), Pin 7 (INT2), Pin 8 (INT3), Pin 35 (INT4) #define UHS_MAX3421E_INT_ 7 @@ -182,7 +182,7 @@ e-mail : support@circuitsathome.com -#if defined(NO_AUTO_SPEED) +#ifdef NO_AUTO_SPEED // Ugly details section... // MAX3421E characteristics // SPI Serial - Clock Input. An external SPI master supplies SCLK with frequencies up to 26MHz. The @@ -195,8 +195,8 @@ e-mail : support@circuitsathome.com // Theoretical deadline for reply 17.7ns // 26MHz 38.4615ns period <-- MAX3421E theoretical maximum -#if !defined(UHS_MAX3421E_SPD) -#if defined(ARDUINO_SAMD_ZERO) +#ifndef UHS_MAX3421E_SPD +#ifdef ARDUINO_SAMD_ZERO // Zero violates spec early, needs a long setup time, or doesn't like high latency. #define UHS_MAX3421E_SPD 10000000 #elif defined(ARDUINO_ARCH_PIC32) @@ -225,7 +225,7 @@ e-mail : support@circuitsathome.com // Why not 26MHz? Because I have not found any MCU board that // can actually go that fast without problems. // Could be a shield limitation too. -#if !defined(UHS_MAX3421E_SPD) +#ifndef UHS_MAX3421E_SPD #define UHS_MAX3421E_SPD 25000000 #endif #endif @@ -271,7 +271,7 @@ e-mail : support@circuitsathome.com // |______| |______| |______| |______________| // #define IRQ_SENSE FALLING -#if defined(ARDUINO_ARCH_PIC32) +#ifdef ARDUINO_ARCH_PIC32 //#define bmPULSEWIDTH PUSLEWIDTH10_6 #define bmPULSEWIDTH 0 #define bmIRQ_SENSE 0 @@ -280,20 +280,20 @@ e-mail : support@circuitsathome.com #define bmIRQ_SENSE 0 #endif #else -#if !defined(IRQ_SENSE) +#ifndef IRQ_SENSE #define IRQ_SENSE LOW #endif -#if !defined(bmPULSEWIDTH) +#ifndef bmPULSEWIDTH #define bmPULSEWIDTH 0 #endif -#if !defined(bmIRQ_SENSE) +#ifndef bmIRQ_SENSE #define bmIRQ_SENSE bmINTLEVEL #endif #endif class MAX3421E_HOST : public UHS_USB_HOST_BASE -#if defined(SWI_IRQ_NUM) +#ifdef SWI_IRQ_NUM , public dyn_SWI #endif { @@ -487,7 +487,7 @@ public: uint8_t* bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* data_p); // ARM/NVIC specific, used to emulate reentrant ISR. -#if defined(SWI_IRQ_NUM) +#ifdef SWI_IRQ_NUM void dyn_SWISR(void) { ISRbottom(); @@ -498,7 +498,7 @@ public: // Used on MCU that lack control of IRQ priority (AVR). // Suspends ISRs, for critical code. IRQ will be serviced after it is resumed. // NOTE: you must track the state yourself! -#if defined(__AVR__) +#ifdef __AVR__ noInterrupts(); detachInterrupt(UHS_GET_DPI(irq_pin)); interrupts(); @@ -507,10 +507,10 @@ public: virtual void UHS_NI resume_host(void); }; -#if !defined(SPIclass) +#ifndef SPIclass #define SPIclass SPI #endif -#if !defined(USB_HOST_SHIELD_LOADED) +#ifndef USB_HOST_SHIELD_LOADED #include "USB_HOST_SHIELD_INLINE.h" #endif #else diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h index 78669305d9..f32d60445d 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h @@ -21,7 +21,7 @@ e-mail : support@circuitsathome.com #define USB_HOST_SHIELD_LOADED #include -#if !defined(digitalPinToInterrupt) +#ifndef digitalPinToInterrupt #error digitalPinToInterrupt not defined, complain to your board maintainer. #endif @@ -49,7 +49,7 @@ void UHS_NI MAX3421E_HOST::resume_host(void) { // Used on MCU that lack control of IRQ priority (AVR). // Resumes ISRs. // NOTE: you must track the state yourself! -#if defined(__AVR__) +#ifdef __AVR__ noInterrupts(); if(irq_pin & 1) { ISRodd = this; @@ -314,7 +314,7 @@ int16_t UHS_NI MAX3421E_HOST::Init(int16_t mseconds) { #if USB_HOST_SHIELD_USE_ISR int intr = digitalPinToInterrupt(irq_pin); if(intr == NOT_AN_INTERRUPT) { -#if defined(ARDUINO_AVR_ADK) +#ifdef ARDUINO_AVR_ADK if(irq_pin == 54) intr = 6; else @@ -325,7 +325,7 @@ int16_t UHS_NI MAX3421E_HOST::Init(int16_t mseconds) { #else SPIclass.usingInterrupt(255); #endif -#if !defined(NO_AUTO_SPEED) +#ifndef NO_AUTO_SPEED // test to get to reset acceptance. uint32_t spd = UHS_MAX3421E_SPD; again: @@ -901,7 +901,7 @@ void UHS_NI MAX3421E_HOST::ISRTask(void) { DDSB(); -#if !defined(SWI_IRQ_NUM) +#ifndef SWI_IRQ_NUM suspend_host(); #if USB_HOST_SHIELD_USE_ISR // Enable interrupts @@ -965,7 +965,7 @@ void UHS_NI MAX3421E_HOST::ISRTask(void) // usb_task_polling_disabled? "T" : "F"); DDSB(); regWr(rHIRQ, HIRQ_sendback); -#if !defined(SWI_IRQ_NUM) +#ifndef SWI_IRQ_NUM resume_host(); #if USB_HOST_SHIELD_USE_ISR // Disable interrupts @@ -981,7 +981,7 @@ void UHS_NI MAX3421E_HOST::ISRTask(void) UHS_PIN_WRITE(USB_HOST_SHIELD_TIMING_PIN, HIGH); #endif -#if defined(SWI_IRQ_NUM) +#ifdef SWI_IRQ_NUM // MAX_HOST_DEBUG(PSTR("--------------- Doing SWI ----------------")); exec_SWI(this); #else diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h index 9b2b5a3746..f368604a9a 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h @@ -139,7 +139,7 @@ AJK_IIF(AJK_BITAND(AJK_IS_COMPARABLE(x))(AJK_IS_COMPARABLE(y)) ) \ #define AJK_FUN(AJK_count, AJK_v, AJK_args, AJK_body) AJK_v ## AJK_count (AJK_args) { AJK_body(AJK_count) } #define AJK_MAKE_FUNS(AJK_v, AJK_args, AJK_count, AJK_body) AJK_EVAL(AJK_REPEAT(AJK_count, AJK_FUN, AJK_v, AJK_args, AJK_body)) -#if defined(AJK_TEST_MACRO_LOGIC) +#ifdef AJK_TEST_MACRO_LOGIC #define BODY(AJKindex) some(C, statement); contaning(a, test[AJKindex]); #define ZERO_TIMES_TEST 0 diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h index 5516fbf126..65f1e74fc8 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h @@ -35,8 +35,8 @@ static char dyn_SWI_initied = 0; static dyn_SWI* dyn_SWI_LIST[SWI_MAXIMUM_ALLOWED]; static dyn_SWI* dyn_SWI_EXEC[SWI_MAXIMUM_ALLOWED]; -#if defined(__arm__) -#if defined(__USE_CMSIS_VECTORS__) +#ifdef __arm__ +#ifdef __USE_CMSIS_VECTORS__ extern "C" { void (*_VectorsRam[VECTORTABLE_SIZE])(void)__attribute__((aligned(VECTORTABLE_ALIGNMENT))); } @@ -55,20 +55,20 @@ __attribute__((always_inline)) static inline void __DSB(void) { /** * Execute queued class ISR routines. */ -#if defined(ARDUINO_ARCH_PIC32) +#ifdef ARDUINO_ARCH_PIC32 static p32_regset *ifs = ((p32_regset *) & IFS0) + (SWI_IRQ_NUM / 32); //interrupt flag register set static p32_regset *iec = ((p32_regset *) & IEC0) + (SWI_IRQ_NUM / 32); //interrupt enable control reg set static uint32_t swibit = 1 << (SWI_IRQ_NUM % 32); void -#if defined(__PIC32MZXX__) +#ifdef __PIC32MZXX__ __attribute__((nomips16,at_vector(SWI_VECTOR),interrupt(SWI_IPL))) #else __attribute__((interrupt(),nomips16)) #endif softISR(void) { #else -#if defined(ARDUINO_spresense_ast) +#ifdef ARDUINO_spresense_ast unsigned int softISR(void) { #else void softISR(void) { @@ -82,7 +82,7 @@ void softISR(void) { // Make a working copy, while clearing the queue. noInterrupts(); -#if defined(ARDUINO_ARCH_PIC32) +#ifdef ARDUINO_ARCH_PIC32 //ifs->clr = swibit; #endif for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) { @@ -95,21 +95,21 @@ void softISR(void) { // Execute each class SWI for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) { if(dyn_SWI_EXEC[i]) { -#if defined(__DYN_SWI_DEBUG_LED__) +#ifdef __DYN_SWI_DEBUG_LED__ digitalWrite(__DYN_SWI_DEBUG_LED__, HIGH); #endif dyn_SWI_EXEC[i]->dyn_SWISR(); -#if defined(__DYN_SWI_DEBUG_LED__) +#ifdef __DYN_SWI_DEBUG_LED__ digitalWrite(__DYN_SWI_DEBUG_LED__, LOW); #endif } } -#if defined(ARDUINO_ARCH_PIC32) +#ifdef ARDUINO_ARCH_PIC32 noInterrupts(); if(!dyn_SWI_EXEC[0]) ifs->clr = swibit; interrupts(); #endif -#if defined(ARDUINO_spresense_ast) +#ifdef ARDUINO_spresense_ast return 0; #endif } @@ -118,7 +118,7 @@ void softISR(void) { #endif -#if defined(__arm__) +#ifdef __arm__ #ifndef interruptsStatus #define interruptsStatus() __interruptsStatus() static inline unsigned char __interruptsStatus(void) __attribute__((always_inline, unused)); @@ -136,7 +136,7 @@ static inline unsigned char __interruptsStatus(void) { */ static void Init_dyn_SWI(void) { if(!dyn_SWI_initied) { -#if defined(__USE_CMSIS_VECTORS__) +#ifdef __USE_CMSIS_VECTORS__ uint32_t *X_Vectors = (uint32_t*)SCB->VTOR; for(int i = 0; i < VECTORTABLE_SIZE; i++) { _VectorsRam[i] = reinterpret_cast(X_Vectors[i]); /* copy vector table to RAM */ @@ -147,7 +147,7 @@ static void Init_dyn_SWI(void) { DDSB(); interrupts(); #endif -#if !defined(ARDUINO_spresense_ast) +#ifndef ARDUINO_spresense_ast for(int i = 0; i < SWI_MAXIMUM_ALLOWED; i++) dyn_SWI_LIST[i] = NULL; noInterrupts(); _VectorsRam[SWI_IRQ_NUM + 16] = reinterpret_cast(softISR); @@ -156,7 +156,7 @@ static void Init_dyn_SWI(void) { NVIC_SET_PRIORITY(SWI_IRQ_NUM, 255); NVIC_ENABLE_IRQ(SWI_IRQ_NUM); #endif -#if defined(__DYN_SWI_DEBUG_LED__) +#ifdef __DYN_SWI_DEBUG_LED__ pinMode(__DYN_SWI_DEBUG_LED__, OUTPUT); digitalWrite(__DYN_SWI_DEBUG_LED__, LOW); #endif @@ -180,7 +180,7 @@ int exec_SWI(const dyn_SWI* klass) { if(!dyn_SWI_LIST[i]) { rc = 1 + i; // Success! dyn_SWI_LIST[i] = (dyn_SWI*)klass; -#if !defined(ARDUINO_spresense_ast) +#ifndef ARDUINO_spresense_ast if(!NVIC_GET_PENDING(SWI_IRQ_NUM)) NVIC_SET_PENDING(SWI_IRQ_NUM); #else // Launch 1-shot timer as an emulated SWI @@ -211,7 +211,7 @@ static void Init_dyn_SWI(void) { iec->clr = swibit; iec->set = swibit; restoreInterrupts(sreg); -#if defined(__DYN_SWI_DEBUG_LED__) +#ifdef __DYN_SWI_DEBUG_LED__ pinMode(__DYN_SWI_DEBUG_LED__, OUTPUT); UHS_PIN_WRITE(__DYN_SWI_DEBUG_LED__, LOW); #endif diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h index 93118a6d75..3ff839c80e 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/dyn_SWI.h @@ -24,26 +24,26 @@ #if defined(__arm__) || defined(ARDUINO_ARCH_PIC32) -#if defined(ARDUINO_ARCH_PIC32) +#ifdef ARDUINO_ARCH_PIC32 #include #endif #ifdef __cplusplus -#if defined(true) +#ifdef true #undef true #endif -#if defined(false) +#ifdef false #undef false #endif #endif -#if defined(ARDUINO_spresense_ast) +#ifdef ARDUINO_spresense_ast #define SWI_IRQ_NUM 666 // because this board is totally evil. #elif defined(ARDUINO_ARCH_PIC32) #ifndef SWI_IRQ_NUM -#if defined(_DSPI0_IPL_ISR) +#ifdef _DSPI0_IPL_ISR #define SWI_IPL _DSPI0_IPL_ISR #define SWI_VECTOR _DSPI0_ERR_IRQ #define SWI_IRQ_NUM _DSPI0_ERR_IRQ @@ -57,7 +57,7 @@ extern "C" { void -#if defined(__PIC32MZXX__) +#ifdef __PIC32MZXX__ __attribute__((nomips16,at_vector(SWI_VECTOR),interrupt(SWI_IPL))) #else __attribute__((interrupt(),nomips16)) @@ -69,7 +69,7 @@ extern "C" #elif !defined(NVIC_NUM_INTERRUPTS) // Assume CMSIS #define __USE_CMSIS_VECTORS__ -#if defined(NUMBER_OF_INT_VECTORS) +#ifdef NUMBER_OF_INT_VECTORS #define NVIC_NUM_INTERRUPTS (NUMBER_OF_INT_VECTORS-16) #else #define NVIC_NUM_INTERRUPTS ((int)PERIPH_COUNT_IRQn) @@ -114,7 +114,7 @@ extern "C" #ifndef NVIC_GET_PENDING #define NVIC_GET_PENDING(n) (*((volatile uint32_t *)0xE000E200 + ((n) >> 5)) & (1 << ((n) & 31))) #ifndef SWI_IRQ_NUM -#if defined(__MK20DX256__) +#ifdef __MK20DX256__ #define SWI_IRQ_NUM 17 #elif defined(__MK20DX128__) #define SWI_IRQ_NUM 5 @@ -165,7 +165,7 @@ extern int exec_SWI(const dyn_SWI* klass); // if no SWI for CPU (e.g. AVR) make a void stub. #ifndef SWI_NO_STUB #define Init_dyn_SWI() (void(0)) -#if !defined(DDSB) +#ifndef DDSB #define DDSB() (void(0)) #endif #endif diff --git a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h index 36d69b64c9..50d59af3bf 100644 --- a/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h +++ b/buildroot/share/PlatformIO/variants/BIGTREE_GENERIC_STM32F407_5X/stm32f4xx_hal_conf.h @@ -87,11 +87,11 @@ extern "C" { * This value is used by the RCC HAL module to compute the system frequency * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#ifndef HSE_VALUE #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ -#if !defined (HSE_STARTUP_TIMEOUT) +#ifndef HSE_STARTUP_TIMEOUT #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ @@ -100,14 +100,14 @@ extern "C" { * This value is used by the RCC HAL module to compute the system frequency * (when HSI is used as system clock source, directly or through the PLL). */ -#if !defined (HSI_VALUE) +#ifndef HSI_VALUE #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#ifndef LSI_VALUE #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -115,11 +115,11 @@ in voltage and temperature.*/ /** * @brief External Low Speed oscillator (LSE) value. */ -#if !defined (LSE_VALUE) +#ifndef LSE_VALUE #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ #endif /* LSE_VALUE */ -#if !defined (LSE_STARTUP_TIMEOUT) +#ifndef LSE_STARTUP_TIMEOUT #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ @@ -128,7 +128,7 @@ in voltage and temperature.*/ * This value is used by the I2S HAL module to compute the I2S clock source * frequency, this source is inserted directly through I2S_CKIN pad. */ -#if !defined (EXTERNAL_CLOCK_VALUE) +#ifndef EXTERNAL_CLOCK_VALUE #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ #endif /* EXTERNAL_CLOCK_VALUE */ @@ -455,7 +455,7 @@ in voltage and temperature.*/ #endif /* HAL_MMC_MODULE_ENABLED */ /* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT +#ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h index 36d69b64c9..50d59af3bf 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F407VE/stm32f4xx_hal_conf.h @@ -87,11 +87,11 @@ extern "C" { * This value is used by the RCC HAL module to compute the system frequency * (when HSE is used as system clock source, directly or through the PLL). */ -#if !defined (HSE_VALUE) +#ifndef HSE_VALUE #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ #endif /* HSE_VALUE */ -#if !defined (HSE_STARTUP_TIMEOUT) +#ifndef HSE_STARTUP_TIMEOUT #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ #endif /* HSE_STARTUP_TIMEOUT */ @@ -100,14 +100,14 @@ extern "C" { * This value is used by the RCC HAL module to compute the system frequency * (when HSI is used as system clock source, directly or through the PLL). */ -#if !defined (HSI_VALUE) +#ifndef HSI_VALUE #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** * @brief Internal Low Speed oscillator (LSI) value. */ -#if !defined (LSI_VALUE) +#ifndef LSI_VALUE #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations @@ -115,11 +115,11 @@ in voltage and temperature.*/ /** * @brief External Low Speed oscillator (LSE) value. */ -#if !defined (LSE_VALUE) +#ifndef LSE_VALUE #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ #endif /* LSE_VALUE */ -#if !defined (LSE_STARTUP_TIMEOUT) +#ifndef LSE_STARTUP_TIMEOUT #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ #endif /* LSE_STARTUP_TIMEOUT */ @@ -128,7 +128,7 @@ in voltage and temperature.*/ * This value is used by the I2S HAL module to compute the I2S clock source * frequency, this source is inserted directly through I2S_CKIN pad. */ -#if !defined (EXTERNAL_CLOCK_VALUE) +#ifndef EXTERNAL_CLOCK_VALUE #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ #endif /* EXTERNAL_CLOCK_VALUE */ @@ -455,7 +455,7 @@ in voltage and temperature.*/ #endif /* HAL_MMC_MODULE_ENABLED */ /* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT +#ifdef USE_FULL_ASSERT /** * @brief The assert_param macro is used for function's parameters check. * @param expr: If expr is false, it calls assert_failed function diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 73709f2376..cd35306c0f 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -592,7 +592,7 @@ #define DEFAULT_bedKd 1164.25 #endif -#if defined(U20_PLUS) +#ifdef U20_PLUS // These PID setting MUST be updated. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #define DEFAULT_bedKp 841.68 @@ -1114,7 +1114,7 @@ #define Z_MACHINE_MAX 400 #endif -#if defined(U20_PLUS) +#ifdef U20_PLUS #define X_BED_SIZE 400 #define Y_BED_SIZE 400 #define Z_MACHINE_MAX 500 diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 2ecd3f8ae3..a8fe4d2bbc 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -592,7 +592,7 @@ #define DEFAULT_bedKd 1164.25 #endif -#if defined(U20_PLUS) +#ifdef U20_PLUS // These PID setting MUST be updated. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #define DEFAULT_bedKp 841.68 @@ -1114,7 +1114,7 @@ #define Z_MACHINE_MAX 400 #endif -#if defined(U20_PLUS) +#ifdef U20_PLUS #define X_BED_SIZE 400 #define Y_BED_SIZE 400 #define Z_MACHINE_MAX 500