SAMD51: Update LCD pins (#14907)

2.0.x
Giuliano Zaro 5 years ago committed by Scott Lahteine
parent 9479ec32f7
commit 3129fd06f0

@ -102,7 +102,7 @@
#if HAS_FILAMENT_SENSOR #if HAS_FILAMENT_SENSOR
#ifndef FIL_RUNOUT_PIN #ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN Y_MIN_PIN #define FIL_RUNOUT_PIN Y_MIN_PIN
#endif #endif
#endif #endif
@ -172,35 +172,38 @@
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 75 #error "Pin compatibility check needed!"
#define BEEPER_PIN 54
#define LCD_PINS_D4 48 #define LCD_PINS_D4 48
#define LCD_PINS_D7 53 #define LCD_PINS_D7 53
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 76 #define LCD_PINS_RS 55
#define LCD_PINS_ENABLE 77 #define LCD_PINS_ENABLE 56
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 75 #define BEEPER_PIN 54
#define LCD_PINS_D4 48 #define LCD_PINS_D4 48
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 76 #define LCD_PINS_RS 55
#define LCD_PINS_ENABLE 77 #define LCD_PINS_ENABLE 56
#elif HAS_SSD1306_OLED_I2C #elif HAS_SSD1306_OLED_I2C
#define BEEPER_PIN 75 #error "Pin compatibility check needed!"
#define BEEPER_PIN 54
#define LCD_SDSS 10 #define LCD_SDSS 10
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI #define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#elif ENABLED(FYSETC_MINI_12864) #elif ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN 75 #error "Pin compatibility check needed!"
#define DOGLCD_CS 77 #define BEEPER_PIN 54
#define DOGLCD_A0 76 #define DOGLCD_CS 56
#define DOGLCD_A0 55
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0 // results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally. #define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
@ -217,7 +220,7 @@
#endif #endif
#elif ENABLED(FYSETC_MINI_12864_2_1) #elif ENABLED(FYSETC_MINI_12864_2_1)
#error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK." #error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK."
#define NEOPIXEL_PIN 50 // D5 #define NEOPIXEL_PIN 50 // D5
#endif #endif
#elif ENABLED(MKS_MINI_12864) #elif ENABLED(MKS_MINI_12864)

Loading…
Cancel
Save