From 2b2a8355c9ac2c9361c8e21b533ad772a0756d28 Mon Sep 17 00:00:00 2001 From: Tanguy Pruvot Date: Wed, 4 Aug 2021 08:14:54 +0200 Subject: [PATCH] =?UTF-8?q?=F0=9F=90=9B=20Fix=20Longer3D=20STM32=20boot,?= =?UTF-8?q?=20add=20Maple=20test=20(#22473)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- .github/workflows/test-builds.yml | 3 +- Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h | 9 +- .../MARLIN_F103VE_LONGER/PeripheralPins.c | 289 +++++++++++++++ .../MARLIN_F103VE_LONGER/PinNamesVar.h | 32 ++ .../MARLIN_F103VE_LONGER/hal_conf_custom.h | 348 ++++++++++++++++++ .../variants/MARLIN_F103VE_LONGER/ldscript.ld | 189 ++++++++++ .../variants/MARLIN_F103VE_LONGER/variant.cpp | 249 +++++++++++++ .../variants/MARLIN_F103VE_LONGER/variant.h | 175 +++++++++ ini/stm32f1.ini | 14 +- 9 files changed, 1299 insertions(+), 9 deletions(-) create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PeripheralPins.c create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PinNamesVar.h create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/ldscript.ld create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.cpp create mode 100644 buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.h diff --git a/.github/workflows/test-builds.yml b/.github/workflows/test-builds.yml index 5429f3eb95..e45bf42f29 100644 --- a/.github/workflows/test-builds.yml +++ b/.github/workflows/test-builds.yml @@ -61,7 +61,7 @@ jobs: - STM32F103RC_fysetc - STM32F103RC_meeb - jgaurora_a5s_a1 - - STM32F103VE_longer + - STM32F103VE_longer_maple #- mks_robin_maple - mks_robin_lite - mks_robin_pro @@ -75,6 +75,7 @@ jobs: - STM32F103RE_btt - STM32F103RE_btt_USB - STM32F103RET6_creality + - STM32F103VE_longer - STM32F407VE_black - STM32F401VE_STEVAL - BIGTREE_BTT002 diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h index f9ec42b68e..bdf215fa8e 100644 --- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h +++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h @@ -99,12 +99,19 @@ // Avoid nozzle heat and fan start before serial init #define BOARD_OPENDRAIN_MOSFETS -#define BOARD_PREINIT() { \ +#define BOARD_INIT_OD_PINS() { \ OUT_WRITE_OD(HEATER_0_PIN, 0); \ OUT_WRITE_OD(HEATER_BED_PIN, 0); \ OUT_WRITE_OD(FAN_PIN, 0); \ } +#ifdef MAPLE_STM32F1 + // Only Maple Framework allow that early + #define BOARD_PREINIT BOARD_INIT_OD_PINS +#else + #define BOARD_INIT BOARD_INIT_OD_PINS +#endif + // // PWM for a servo probe // Other servo devices are not supported on this board! diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PeripheralPins.c new file mode 100644 index 0000000000..ba4046d5f9 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PeripheralPins.c @@ -0,0 +1,289 @@ +/* + ******************************************************************************* + * Copyright (c) 2020, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + * Automatically generated from STM32F103V(F-G)Tx.xml + */ +#include "Arduino.h" +#include "PeripheralPins.h" + +/* ===== + * Note: Commented lines are alternative possibilities which are not used per default. + * If you change them, you will have to know what you do + * ===== + */ + +//*** ADC *** + +#ifdef HAL_ADC_MODULE_ENABLED +WEAK const PinMap PinMap_ADC[] = { + {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 +//{PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0 +//{PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0 + {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 +//{PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1 +//{PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1 + {NC, NP, 0} +}; +#endif + +//*** DAC *** + +#if defined(STM32F103xE) || defined(STM32F103xG) +#ifdef HAL_DAC_MODULE_ENABLED +WEAK const PinMap PinMap_DAC[] = { +//{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 +//{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 + {NC, NP, 0} +}; +#endif +#endif + +//*** I2C *** + +#ifdef HAL_I2C_MODULE_ENABLED +WEAK const PinMap PinMap_I2C_SDA[] = { + {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_I2C_SCL[] = { + {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)}, + {NC, NP, 0} +}; +#endif + +//*** PWM *** + +#ifdef HAL_TIM_MODULE_ENABLED +WEAK const PinMap PinMap_PWM[] = { +#if 0 + {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM2_CH1 + //{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 1, 0)}, // TIM2_CH1 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM5_CH1 +#endif + {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM2_CH2 + //{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 2, 0)}, // TIM2_CH2 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM5_CH2 +#endif + {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM2_CH3 + //{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 3, 0)}, // TIM2_CH3 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM5_CH3 +#endif +#ifdef STM32F103xG + //{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM9_CH1 +#endif + //{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 4, 0)}, // TIM2_CH4 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4 + {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM5_CH4 +#else + {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4 +#endif +#if defined(STM32F103xG) + //{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM9_CH2 +#endif + {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM3_CH1 +#if defined(STM32F103xG) + //{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM13_CH1 +#endif + {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N + //{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM3_CH2 + //{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM8_CH1N +#if defined(STM32F103xG) + //{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM14_CH1 +#endif + {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM1_CH1 + //{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 0)}, // TIM1_CH1 + {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM1_CH2 + //{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 0)}, // TIM1_CH2 + {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM1_CH3 + //{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 0)}, // TIM1_CH3 + {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM1_CH4 + //{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 4, 0)}, // TIM1_CH4 + {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 1, 0)}, // TIM2_CH1 + //{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 1, 0)}, // TIM2_CH1 + //{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 1)}, // TIM1_CH2N + {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM3_CH3 + //{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 3, 0)}, // TIM3_CH3 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM8_CH2N +#endif + {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 1)}, // TIM1_CH3N + //{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM3_CH4 + //{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 4, 0)}, // TIM3_CH4 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM8_CH3N +#endif + {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 2, 0)}, // TIM2_CH2 + //{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 2, 0)}, // TIM2_CH2 + {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 1, 0)}, // TIM3_CH1 + {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 2, 0)}, // TIM3_CH2 + {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM4_CH1 + {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM4_CH2 + {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM4_CH3 +#if defined(STM32F103xG) + //{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM10_CH1 +#endif + {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM4_CH4 +#if defined(STM32F103xG) + //{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM11_CH1 +#endif + {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 3, 0)}, // TIM2_CH3 + //{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 3, 0)}, // TIM2_CH3 + {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 4, 0)}, // TIM2_CH4 + //{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 4, 0)}, // TIM2_CH4 + {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM1_CH1N + {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM1_CH2N +#if defined(STM32F103xG) + //{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM12_CH1 +#endif + {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM1_CH3N +#if defined(STM32F103xG) + //{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM12_CH2 +#endif + {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 1, 0)}, // TIM3_CH1 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM8_CH1 +#endif + {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 2, 0)}, // TIM3_CH2 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM8_CH2 +#endif + {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 3, 0)}, // TIM3_CH3 + //{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM8_CH3 + {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 4, 0)}, // TIM3_CH4 +#if defined(STM32F103xE) || defined(STM32F103xG) + //{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM8_CH4 +#endif + {PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 1, 0)}, // TIM4_CH1 + {PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 2, 0)}, // TIM4_CH2 + {PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 3, 0)}, // TIM4_CH3 + {PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM4_ENABLE, 4, 0)}, // TIM4_CH4 +#if defined(STM32F103xG) + {PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM9_ENABLE, 1, 0)}, // TIM9_CH1 + {PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM9_ENABLE, 2, 0)}, // TIM9_CH2 +#endif + {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 1, 1)}, // TIM1_CH1N + {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 1, 0)}, // TIM1_CH1 + {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 2, 1)}, // TIM1_CH2N + {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 2, 0)}, // TIM1_CH2 + {PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 3, 1)}, // TIM1_CH3N + {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 3, 0)}, // TIM1_CH3 + {PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_ENABLE, 4, 0)}, // TIM1_CH4 +#endif // if 0 + {NC, NP, 0} +}; +#endif + +//*** SERIAL *** + +#ifdef HAL_UART_MODULE_ENABLED +WEAK const PinMap PinMap_UART_TX[] = { + {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, + {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, +//{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_UART_RX[] = { + {PA_3, USART2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)}, + {PA_10, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)}, +//{PB_11, USART3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_UART_RTS[] = { + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_UART_CTS[] = { + {NC, NP, 0} +}; +#endif + +//*** SPI *** + +WEAK const PinMap PinMap_SPI_MOSI[] = { + {PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, +//{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_SPI_MISO[] = { + {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, +//{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_SPI_SCLK[] = { + {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, +//{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_SPI_SSEL[] = { +//{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, +//{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, + {NC, NP, 0} +}; + +//*** No CAN *** + +#ifdef HAL_CAN_MODULE_ENABLED +WEAK const PinMap PinMap_CAN_RD[] = { + {NC, NP, 0} +}; + +WEAK const PinMap PinMap_CAN_TD[] = { + {NC, NP, 0} +}; +#endif + +//*** No ETHERNET *** + +//*** No QUADSPI *** + +//*** USB *** + +#ifdef HAL_PCD_MODULE_ENABLED +WEAK const PinMap PinMap_USB[] = { + {PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DM + {PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DP + {NC, NP, 0} +}; +#endif + +//*** No USB_OTG_FS *** + +//*** No USB_OTG_HS *** + +//*** SD *** + +#if defined(STM32F103xE) || defined(STM32F103xG) +#ifdef HAL_SD_MODULE_ENABLED +WEAK const PinMap PinMap_SD[] = { +//{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D4 +//{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D5 +//{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D6 +//{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D7 + {PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D0 + {PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D1 + {PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D2 + {PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D3 + {PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, // SDIO_CK + {PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, // SDIO_CMD + {NC, NP, 0} +}; +#endif +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PinNamesVar.h b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PinNamesVar.h new file mode 100644 index 0000000000..9c07918364 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/PinNamesVar.h @@ -0,0 +1,32 @@ +/* SYS_WKUP */ +#if defined(PWR_WAKEUP_PIN1) && defined(HAL_PWR_MODULE_ENABLED) && !defined(HAL_PWR_MODULE_ONLY) + #error PA0 is used by thermal sensor, disable low power wake with -DHAL_PWR_MODULE_ONLY + SYS_WKUP1 = PA_0, +#endif +#ifdef PWR_WAKEUP_PIN2 + SYS_WKUP2 = NC, +#endif +#ifdef PWR_WAKEUP_PIN3 + SYS_WKUP3 = NC, +#endif +#ifdef PWR_WAKEUP_PIN4 + SYS_WKUP4 = NC, +#endif +#ifdef PWR_WAKEUP_PIN5 + SYS_WKUP5 = NC, +#endif +#ifdef PWR_WAKEUP_PIN6 + SYS_WKUP6 = NC, +#endif +#ifdef PWR_WAKEUP_PIN7 + SYS_WKUP7 = NC, +#endif +#ifdef PWR_WAKEUP_PIN8 + SYS_WKUP8 = NC, +#endif +/* USB */ +#ifdef USBCON + #warning USB feature is not required with a CH340 chip + USB_DM = PA_11, + USB_DP = PA_12, +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h new file mode 100644 index 0000000000..e2247addb9 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/hal_conf_custom.h @@ -0,0 +1,348 @@ +/** + ****************************************************************************** + * @file hal_conf_custom.h for Longer3D STM32F103VE board + * @brief Overrides HAL default configuration file. + ****************************************************************************** + */ +#pragma once + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief Include the default list of modules to be used in the HAL driver + * and manage module deactivation + */ +#include "stm32yyxx_hal_conf.h" + +#ifdef HAL_PWR_MODULE_ENABLED + #undef HAL_PWR_MODULE_ENABLED // only way to disable it +#endif + +#if defined(HAL_PWR_MODULE_ENABLED) && !defined(HAL_PWR_MODULE_ONLY) + #define HAL_PWR_MODULE_ONLY // disable low power & PA0 wakeup pin (its T°c pin) +#endif + +#ifndef HAL_IWDG_MODULE_ENABLED + #define HAL_IWDG_MODULE_ENABLED // USE_WATCHDOG +#endif + +#ifdef HAL_PCD_MODULE_ENABLED + #warning No direct STM32 USB pins on Longer3D board + #undef HAL_PCD_MODULE_ENABLED // USB Device +#endif + +#ifdef HAL_HCD_MODULE_ENABLED + #warning No direct STM32 USB pins on Longer3D board + #undef HAL_HCD_MODULE_ENABLED // USB Host +#endif + +#ifndef HAL_USART_MODULE_ENABLED + //#define HAL_USART_MODULE_ENABLED // Useless.... UART_MODULE do it +#endif + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #undef HAL_CAN_LEGACY_MODULE_ENABLED +#endif + +#ifdef HAL_CAN_MODULE_ENABLED + #undef HAL_CAN_MODULE_ENABLED +#endif + +#ifdef HAL_DAC_MODULE_ENABLED + #undef HAL_DAC_MODULE_ENABLED +#endif + +#ifdef HAL_RTC_MODULE_ENABLED + #undef HAL_RTC_MODULE_ENABLED +#endif + +#ifndef HAL_EXTI_MODULE_ENABLED + #define HAL_EXTI_MODULE_ENABLED // for ENDSTOP_INTERRUPTS_FEATURE +#endif + +/** + * @brief List of modules in the framework (first ones enabled by default) + */ +//#define HAL_MODULE_ENABLED +//#define HAL_ADC_MODULE_ENABLED +//#define HAL_CORTEX_MODULE_ENABLED +//#define HAL_DAC_MODULE_ENABLED +//#define HAL_DMA_MODULE_ENABLED +//#define HAL_FLASH_MODULE_ENABLED +//#define HAL_GPIO_MODULE_ENABLED +//#define HAL_I2C_MODULE_ENABLED +//#define HAL_PCD_MODULE_ENABLED +//#define HAL_PWR_MODULE_ENABLED +//#define HAL_RCC_MODULE_ENABLED +//#define HAL_RTC_MODULE_ENABLED +//#define HAL_SD_MODULE_ENABLED +//#define HAL_SPI_MODULE_ENABLED +//#define HAL_SRAM_MODULE_ENABLED +//#define HAL_TIM_MODULE_ENABLED +//#define HAL_UART_MODULE_ENABLED + +//#define HAL_CAN_MODULE_ENABLED +//#define HAL_CAN_LEGACY_MODULE_ENABLED +//#define HAL_CEC_MODULE_ENABLED +//#define HAL_CRC_MODULE_ENABLED +//#define HAL_ETH_MODULE_ENABLED +//#define HAL_EXTI_MODULE_ENABLED +//#define HAL_HCD_MODULE_ENABLED +//#define HAL_I2S_MODULE_ENABLED +//#define HAL_IRDA_MODULE_ENABLED +//#define HAL_IWDG_MODULE_ENABLED +//#define HAL_NAND_MODULE_ENABLED +//#define HAL_NOR_MODULE_ENABLED +//#define HAL_PCCARD_MODULE_ENABLED +//#define HAL_SMARTCARD_MODULE_ENABLED +//#define HAL_USART_MODULE_ENABLED +//#define HAL_WWDG_MODULE_ENABLED +//#define HAL_MMC_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#ifndef HSE_VALUE + #define HSE_VALUE 8000000U // Value of the External oscillator in Hz (8 MHz) +#endif + +#ifndef HSE_STARTUP_TIMEOUT + #define HSE_STARTUP_TIMEOUT 100U // Time out for HSE start up, in ms +#endif + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#ifndef HSI_VALUE + #define HSI_VALUE 8000000U // Value of the Internal oscillator in Hz +#endif + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#ifndef LSI_VALUE + #define LSI_VALUE 40000U // LSI Typical Value in Hz +#endif /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#ifndef LSE_VALUE + #define LSE_VALUE 32768U // Value of the External Low Speed oscillator in Hz +#endif + +#ifndef LSE_STARTUP_TIMEOUT + #define LSE_STARTUP_TIMEOUT 50U // No 32.7KHz LSE on this board, reduced to avoid delays +#endif + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#ifndef VDD_VALUE + #define VDD_VALUE 3300U // Value of VDD in mv +#endif +#ifndef TICK_INT_PRIORITY + #define TICK_INT_PRIORITY 0x00U // tick interrupt priority +#endif +#ifndef USE_RTOS + #define USE_RTOS 0U +#endif +#ifndef PREFETCH_ENABLE + #define PREFETCH_ENABLE 1U +#endif + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ +#if !defined(USE_SPI_CRC) +#define USE_SPI_CRC 0 +#endif + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f1xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f1xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f1xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f1xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f1xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f1xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "Legacy/stm32f1xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f1xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f1xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f1xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f1xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f1xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f1xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f1xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f1xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f1xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f1xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f1xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f1xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f1xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f1xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f1xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f1xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f1xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f1xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f1xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f1xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f1xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f1xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f1xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f1xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f1xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f1xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + + +#define assert_param(expr) ((void)0U) + +#ifdef __cplusplus +} +#endif + diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/ldscript.ld b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/ldscript.ld new file mode 100644 index 0000000000..6bc577236a --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/ldscript.ld @@ -0,0 +1,189 @@ +/* +****************************************************************************** +** +** File : LinkerScript.ld +** +** Author : Auto-generated by STM32CubeIDE +** +** Abstract : Linker script for STM32F103V(8/B/C/E/F/GTx Device from STM32F1 series +** 64/128/256/512/768/1024Kbytes FLASH +** 20/20/48/64/64/96/96Kbytes RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Distribution: The file is distributed as is without any warranty +** of any kind. +** +***************************************************************************** +** @attention +** +**

© COPYRIGHT(c) 2019 STMicroelectronics

+** +** Redistribution and use in source and binary forms, with or without modification, +** are permitted provided that the following conditions are met: +** 1. Redistributions of source code must retain the above copyright notice, +** this list of conditions and the following disclaimer. +** 2. Redistributions in binary form must reproduce the above copyright notice, +** this list of conditions and the following disclaimer in the documentation +** and/or other materials provided with the distribution. +** 3. Neither the name of STMicroelectronics nor the names of its contributors +** may be used to endorse or promote products derived from this software +** without specific prior written permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of "RAM" Ram type memory */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE + FLASH (rx) : ORIGIN = 0x8000000 + LD_FLASH_OFFSET, LENGTH = LD_MAX_SIZE - LD_FLASH_OFFSET +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.cpp b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.cpp new file mode 100644 index 0000000000..007ef81065 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.cpp @@ -0,0 +1,249 @@ +/* + ******************************************************************************* + * Copyright (c) 2019, STMicroelectronics + * All rights reserved. + * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ******************************************************************************* + */ + +#include "pins_arduino.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// Digital PinName array +const PinName digitalPin[] = { + PA_0, //D0 + PA_1, //D1 + PA_2, //D2 + PA_3, //D3 + PA_4, //D4 + PA_5, //D5 + PA_6, //D6 + PA_7, //D7 + PA_8, //D8 + PA_9, //D9 + PA_10, //D10 + PA_11, //D11 + PA_12, //D12 + PA_13, //D13 + PA_14, //D14 + PA_15, //D15 + + PB_0, //D16 + PB_1, //D17 + PB_2, //D18 + PB_3, //D19 + PB_4, //D20 + PB_5, //D21 + PB_6, //D22 + PB_7, //D23 + PB_8, //D24 + PB_9, //D25 + PB_10, //D26 + PB_11, //D27 + PB_12, //D28 + PB_13, //D29 + PB_14, //D30 + PB_15, //D31 + + PC_0, //D32 + PC_1, //D33 + PC_2, //D34 + PC_3, //D35 + PC_4, //D36 + PC_5, //D37 + PC_6, //D38 + PC_7, //D39 + PC_8, //D40 + PC_9, //D41 + PC_10, //D42 + PC_11, //D43 + PC_12, //D44 + PC_13, //D45 + PC_14, //D46 + PC_15, //D47 + + PD_0, //D48 + PD_1, //D49 + PD_2, //D50 + PD_3, //D51 + PD_4, //D52 + PD_5, //D53 + PD_6, //D54 + PD_7, //D55 + PD_8, //D56 + PD_9, //D57 + PD_10, //D58 + PD_11, //D59 + PD_12, //D60 + PD_13, //D61 + PD_14, //D62 + PD_15, //D63 + + PE_0, //D64 + PE_1, //D65 + PE_2, //D66 + PE_3, //D67 + PE_4, //D68 + PE_5, //D69 + PE_6, //D70 + PE_7, //D71 + PE_8, //D72 + PE_9, //D73 + PE_10, //D74 + PE_11, //D75 + PE_12, //D76 + PE_13, //D77 + PE_14, //D78 + PE_15, //D79 +}; + +// Analog (Ax) pin number array +const uint32_t analogInputPin[] = { + 0, // A0, PA0 + 1, // A1, PA1 + 2, // A2, PA2 + 3, // A3, PA3 + 4, // A4, PA4 + 5, // A5, PA5 + 6, // A6, PA6 + 7, // A7, PA7 + 16, // A8, PB0 + 17, // A9, PB1 + 32, // A10, PC0 + 33, // A11, PC1 + 34, // A12, PC2 + 35, // A13, PC3 + 36, // A14, PC4 + 37, // A15, PC5 +}; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +static bool SetSysClock_PLL_HSE(bool bypass) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + bool ret = false; + + // Initializes the CPU, AHB and APB busses clocks + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + if (bypass == false) { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + } else { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + } + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; // 8Mhz x 9 = 72MHz + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + // Initializes the CPU, AHB and APB busses clocks + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) == HAL_OK) { + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_USB; + PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; // 72/1.5 = 48MHz + #ifndef USBCON + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC; + #endif + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) { + ret = true; + } + } + } + return ret; +} + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source (64MHz max) */ +/******************************************************************************/ +bool SetSysClock_PLL_HSI(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {}; + bool ret = false; + + // Initializes the CPU, AHB and APB busses clocks + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI_DIV2; // 4 MHz + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL12; // 48 MHz + #ifndef USBCON + // When the HSI is used as a PLL clock input, the maximum + // system clock frequency that can be achieved is 64 MHz. + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL16; // 64 MHz, stay close to 72 for delay() + #endif + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { + // Initializes the CPU, AHB and APB busses clocks + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK + | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + // FLASH_LATENCY_1 may cause boot loops + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) == HAL_OK) { + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_USB; + PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV4; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL; // requires 48 MHz + #ifndef USBCON + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC;// No USB, RTC nor I2S + PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV6; // 2 4 6 8 + #endif + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) == HAL_OK) { + ret = true; + } + } + } + return ret; +} + +void SystemClock_Config(void) +{ + /* + * If HSE_VALUE is not 8MHz and you want use it, then: + * - Redefine HSE_VALUE to the correct HSE_VALUE + * - Redefine SystemClock_Config() with the correct settings + */ +#if HSE_VALUE == 8000000U + // 1- Try to start with HSE and external 8MHz xtal + if (SetSysClock_PLL_HSE(false) == false) { + // 2- If fail try to start with HSE and external clock + if (SetSysClock_PLL_HSE(true) == false) { +#endif + // 3- If fail start with HSI clock + if (SetSysClock_PLL_HSI() == false) { + Error_Handler(); + } +#if HSE_VALUE == 8000000U + } + } +#endif +} + +#ifdef __cplusplus +} +#endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.h new file mode 100644 index 0000000000..b0f2ddf0c2 --- /dev/null +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103VE_LONGER/variant.h @@ -0,0 +1,175 @@ +#pragma once + +#ifdef __cplusplus +extern "C" { +#endif // __cplusplus + +// STM32F103VET6 | DIGITAL | ANALOG | USART | TWI | SPI | SPECIAL | +//------------------|-------------|---------------|------------|-----------|----------------------|------------| +#define PA0 0 // | | A0 Nozzle T°c | | | | | +#define PA1 1 // | | A1 Bed T°c | | | | | +#define PA2 2 // | | | USART2_TX | | | | +#define PA3 3 // | | DAC_OUT1** | USART2_RX | | | | +#define PA4 4 // | | DAC_OUT2** | | | SPI1_SS*(wired?) | | +#define PA5 5 // | O | | | | SPI1_SCK EEPROM | | +#define PA6 6 // | I | | | | SPI1_MISO EEPROM | | +#define PA7 7 // | O | | | | SPI1_MOSI EEPROM | | +#define PA8 8 // | Od BED | | | | | | +#define PA9 9 // | | | USART1_TX | | | | +#define PA10 10 // | | | USART1_RX | | | | +#define PA11 11 // | I | | | | | USB_DM | +#define PA12 12 // | I | | | | | USB_DP | +#define PA13 13 // | I | | | | | SWD_SWDIO | +#define PA14 14 // | I | | | | | SWD_SWCLK | +#define PA15 15 // | Od FAN | | | | | | +// |-------------|---------------|------------|-----------|----------------------|------------| +#define PB0 16 // | | | | | | | +#define PB1 17 // | | | | | | | +#define PB2 18 // | I+ | | | | | BOOT1 | +#define PB3 19 // | O X_DIR | | | | | | +#define PB4 20 // | O X_STEP | | | | | | +#define PB5 21 // | O X_EN | | | | | | +#define PB6 22 // | O Y_DIR | | | | | | +#define PB7 23 // | O Y_STEP | | | | | | +#define PB8 24 // | O Y_EN | | | | | | +#define PB9 25 // | O Z_DIR | | | | | | +#define PB10 26 // | I+ | | USART3_TX* | TWI2_SCL* | | | +#define PB11 27 // | I+ | | USART3_RX* | TWI2_SDA* | | | +#define PB12 28 // | O TFT | | | | SPI2_SS | TOUCH_CS | +#define PB13 29 // | O TFT | | | | SPI2_SCK | TOUCH_SCK | +#define PB14 30 // | O TFT | | | | SPI2_MISO (bad>MOSI) | TOUCH_MOSI | +#define PB15 31 // | I TFT | | | | SPI2_MOSI (bad>MISO) | TOUCH_MISO | +// |-------------|---------------|------------|-----------|----------------------|------------| +#define PC0 32 // | I E_OUT | | | | | | +#define PC1 33 // | I+ X_MIN | | | | | | +#define PC2 34 // | O LED | | | | | | +#define PC3 35 // | I+ | | | | | | +#define PC4 36 // | O TFT | | | | | TFT RESET | +#define PC5 37 // | O CS1 | | | | for SPI1 EEPROM CS | | +#define PC6 38 // | I TFT | | | | | TOUCH_INT | +#define PC7 39 // | | | | | | | +#define PC8 40 // | x SDIO | | | | | SD_D0 | +#define PC9 41 // | x SDIO | | | | | SD_D1 | +#define PC10 42 // | x SDIO | | | | | SD_D2 | +#define PC11 43 // | x SDIO | | | | | SD_D3 | +#define PC12 44 // | O SDIO | | | | | SD_CLK | +#define PC13 45 // | I | | | | | | +#define PC14 46 // | I+ Y_MAX | | | | | | +#define PC15 47 // | I+ Y_MIN | | | | | | +// |-------------|---------------|------------|-----------|----------------------|------------| +#define PD0 48 // | O TFT | | | | | OSC_IN D2 | +#define PD1 49 // | O TFT | | | | | OSC_OUT D3 | +#define PD2 50 // | O SDIO | | | | | SD_CMD | +#define PD3 51 // | Od NOZZLE | | | | | | +#define PD4 52 // | O TFT | | | | | FSMC_NOE | +#define PD5 53 // | O TFT | | | | | FSMC_NWE | +#define PD6 54 // | I wired?* | | | | | FSMC_NWAIT*| +#define PD7 55 // | O TFT | | | | | FSMC_NE1/CS| +#define PD8 56 // | O TFT | | | | | FSMC_D13 | +#define PD9 57 // | O TFT | | | | | FSMC_D14 | +#define PD10 58 // | O TFT | | | | | FSMC_D15 | +#define PD11 59 // | O TFT | | | | | FSMC_A16 | +#define PD12 60 // | O TFT | | | | | TFT BL | +#define PD13 61 // | Od PWM* | | | | | SERVO0 | +#define PD14 62 // | O TFT | | | | | FSMC_D00 | +#define PD15 63 // | O TFT | | | | | FSMC_D01 | +// |-------------|---------------|------------|-----------|----------------------|------------| +#define PE0 64 // | O Z_STEP | | | | | | +#define PE1 65 // | O Z_EN | | | | | | +#define PE2 66 // | O E0_DIR | | | | | | +#define PE3 67 // | O E0_STEP | | | | | | +#define PE4 68 // | O E0_EN | | | | | | +#define PE5 69 // | I+ Z_MAX | | | | | | +#define PE6 70 // | I+ Z_MIN | | | | | | +#define PE7 71 // | O TFT | | | | | FSMC_D04 | +#define PE8 72 // | O TFT | | | | | FSMC_D05 | +#define PE9 73 // | O TFT | | | | | FSMC_D06 | +#define PE10 74 // | O TFT | | | | | FSMC_D07 | +#define PE11 75 // | O TFT | | | | | FSMC_D08 | +#define PE12 76 // | O TFT | | | | | FSMC_D09 | +#define PE13 77 // | O TFT | | | | | FSMC_D10 | +#define PE14 78 // | O TFT | | | | | FSMC_D11 | +#define PE15 79 // | O TFT | | | | | FSMC_D12 | +//------------------|-------------|---------------|------------|-----------|----------------------|------------| + +// This must be a literal +#define NUM_DIGITAL_PINS 80 +#define NUM_ANALOG_INPUTS 16 // 2 first are used, but cant be reduced to 2... + +// On-board LED pin number +#ifndef LED_BUILTIN +#define LED_BUILTIN PC2 +#endif + +// On-board user button (not wired) +#ifndef USER_BTN +#define USER_BTN PC13 +#endif + +// SPI Definition (SPI1 EEPROM) +#define PIN_SPI_SS PC5 +#define PIN_SPI_MOSI PA7 +#define PIN_SPI_MISO PA6 +#define PIN_SPI_SCK PA5 + +// I2C Definition (Unused) +#define PIN_WIRE_SDA PB11 +#define PIN_WIRE_SCL PB10 + +// Timer Definitions +// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin +#ifndef TIMER_TONE + #define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM7 +#endif + +// UART Definitions +// Define here Serial instance number to map on Serial generic name +#define SERIAL_UART_INSTANCE 1 + +// Default pin used for 'Serial' instance (linked to CH340 USB port) +#define PIN_SERIAL_RX PA10 +#define PIN_SERIAL_TX PA9 +#define PIN_SERIAL1_RX PA10 +#define PIN_SERIAL1_TX PA9 +// Default pin used for 'Serial2' instance (connector exists but unsoldered) +#define PIN_SERIAL2_RX PA3 +#define PIN_SERIAL2_TX PA2 + +// Extra HAL modules +#if defined(STM32F103xE) +//#define HAL_DAC_MODULE_ENABLED (unused or maybe for the eeprom write?) +#define HAL_SD_MODULE_ENABLED +#define HAL_SRAM_MODULE_ENABLED +#endif + +#ifdef __cplusplus +} // extern "C" +#endif +/*---------------------------------------------------------------------------- + * Arduino objects - C++ only + *----------------------------------------------------------------------------*/ + +#ifdef __cplusplus + // These serial port names are intended to allow libraries and architecture-neutral + // sketches to automatically default to the correct port name for a particular type + // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, + // the first hardware serial port whose RX/TX pins are not dedicated to another use. + // + // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor + // + // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial + // + // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library + // + // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. + // + // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX + // pins are NOT connected to anything by default. + #define SERIAL_PORT_MONITOR Serial1 + #define SERIAL_PORT_HARDWARE Serial1 + #define SERIAL_PORT_HARDWARE_OPEN Serial2 +#endif + diff --git a/ini/stm32f1.ini b/ini/stm32f1.ini index 029763b9ed..1185e8f84d 100644 --- a/ini/stm32f1.ini +++ b/ini/stm32f1.ini @@ -330,19 +330,19 @@ upload_protocol = serial # [env:STM32F103VE_longer] platform = ${common_stm32.platform} +lib_deps = ${common.lib_deps} + https://github.com/tpruvot/STM32_Servo_OpenDrain/archive/2.0.zip extends = stm32_variant board = genericSTM32F103VE -board_build.variant = MARLIN_F103Vx +board_build.variant = MARLIN_F103VE_LONGER board_build.rename = project.bin board_build.offset = 0x10000 board_upload.offset_address = 0x08010000 -build_flags = ${stm32_variant.build_flags} - -DMCU_STM32F103VE -DU20 -DTS_V12 -DLED_BUILTIN=PC2 -UPIN_WIRE_SDA - -UPIN_WIRE_SCL -DPIN_WIRE_SDA=PB11 -DPIN_WIRE_SCL=PB10 - -DHAL_DAC_MODULE_DISABLED -DHAL_I2S_MODULE_DISABLED -build_unflags = ${stm32_variant.build_unflags} - -DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED +build_flags = ${stm32_variant.build_flags} -DMCU_STM32F103VE -DU20 -DTS_V12 +build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED extra_scripts = ${stm32_variant.extra_scripts} +monitor_speed = 250000 +debug_tool = stlink # # TRIGORILLA PRO (STM32F103ZET6)