melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

FLSun Hispeedv1 Board update (#19959)

Browse Source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2.0.x
Foxies 4 years ago committed by Scott Lahteine
parent 172cc0dd03
commit 292e83466e
1 changed files with 86 additions and 102 deletions
Show Stats Download Patch File Download Diff File

188
Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
Unescape Escape View File

@ -50,15 +50,16 @@
// //
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) #if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION #define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE (0x800U) // 2KB #define EEPROM_PAGE_SIZE (0x800U) // 2KB
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL) #define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE // 2KB
#endif #endif
//
// SPI // SPI
// Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface. // Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface.
// //
#define SPI_DEVICE 2 #define SPI_DEVICE 2
// SPI Flash // SPI Flash
#define HAS_SPI_FLASH 1 #define HAS_SPI_FLASH 1
@ -108,49 +109,26 @@
#define E0_STEP_PIN PD6 // E0_STEP #define E0_STEP_PIN PD6 // E0_STEP
#define E0_DIR_PIN PD3 // E0_DIR #define E0_DIR_PIN PD3 // E0_DIR
/**
* FLSUN Hi-Speed has no hard-wired UART pins for TMC drivers.
* Several wiring options are provided below, defaulting to
* to the most compatible.
*/
// //
// Drivers // Drivers
// //
#if HAS_TMC220x #if HAS_TMC220x
// SoftwareSerial with one pin per driver
#if ENABLED(HARDWARE_SERIAL) /* TMC2209 */ // Compatible with TMC2208 and TMC2209 drivers
#define X_SLAVE_ADDRESS 3 // | | : #define X_SERIAL_TX_PIN PA10 // RXD1
#define Y_SLAVE_ADDRESS 2 // : | : #define X_SERIAL_RX_PIN PA10 // RXD1
#define Z_SLAVE_ADDRESS 1 // | : : #define Y_SERIAL_TX_PIN PA9 // TXD1
//#define E0_SLAVE_ADDRESS 0 // : : : #define Y_SERIAL_RX_PIN PA9 // TXD1
#define Z_SERIAL_TX_PIN PC7 // IO1
#define X_SERIAL_TX_PIN PA9 // TXD1 #define Z_SERIAL_RX_PIN PC7 // IO1
#define X_SERIAL_RX_PIN PA9 // TXD1 #define TMC_BAUD_RATE 19200
#define Y_SERIAL_TX_PIN PA9 // TXD1
#define Y_SERIAL_RX_PIN PA9 // TXD1
#define Z_SERIAL_TX_PIN PA9 // TXD1
#define Z_SERIAL_RX_PIN PA9 // TXD1
#elif ENABLED(SOFTWARE_SERIAL) /* TMC220x */
/**
* TMC2208 stepper UART-configurable by PDN_UART pin
* Software serial
*/
#define X_SLAVE_ADDRESS 0
#define Y_SLAVE_ADDRESS 0
#define Z_SLAVE_ADDRESS 0
#define X_SERIAL_TX_PIN PA10 // RXD1
#define X_SERIAL_RX_PIN PA10 // RXD1
#define Y_SERIAL_TX_PIN PA9 // TXD1
#define Y_SERIAL_RX_PIN PA9 // TXD1
#define Z_SERIAL_TX_PIN PC7 // IO1
#define Z_SERIAL_RX_PIN PC7 // IO1
#endif
// Reduce baud rate to improve software serial reliability
#define TMC_BAUD_RATE 19200
#else #else
// Motor current PWM pins // Motor current PWM pins
#define MOTOR_CURRENT_PWM_XY_PIN PA6 // VREF2/3 CONTROL XY #define MOTOR_CURRENT_PWM_XY_PIN PA6 // VREF2/3 CONTROL XY
#define MOTOR_CURRENT_PWM_Z_PIN PA7 // VREF4 CONTROL Z #define MOTOR_CURRENT_PWM_Z_PIN PA7 // VREF4 CONTROL Z
@ -159,33 +137,33 @@
#define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 } #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
#endif #endif
/** /**
* src: MKS Robin_Mini V2 * MKS Robin_Wifi or another ESP8266 module
* __ESP(M1)__ -J1- *
* GND| 15 | | 08 |+3v3 (22)=>RXD1(PA10) // * __ESP(M1)__ -J1-
* | 16 | | 07 |MOSI (21)=>TXD1(PA9) // active low, probably OK to leave floating * GND| 15 | | 08 |+3v3 (22) RXD1 (PA10)
* IO2| 17 | | 06 |MISO (19)=>IO1(PC7) // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) * | 16 | | 07 |MOSI (21) TXD1 (PA9) Active LOW, probably OK to leave floating
* IO0| 18 | | 05 |CLK (18)=>IO0(PA8) // must be high (ESP3D software configures this with a pullup so OK to leave as floating) * IO2| 17 | | 06 |MISO (19) IO1 (PC7) Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
* IO1| 19 | | 03 |EN (03)=>WIFI_EN() // Must be high for module to run * IO0| 18 | | 05 |CLK (18) IO0 (PA8) Must be HIGH (ESP3D software configures this with a pullup so OK to leave as floating)
* | nc | | nc | (01)=>WIFI_CTRL(PA5) * IO1| 19 | | 03 |EN (03) WIFI_EN Must be HIGH for module to run
* RX| 21 | | nc | * | nc | | nc | (01) WIFI_CTRL (PA5)
* TX| 22 | | 01 |RST * RX| 21 | | nc |
* ￣￣ AE￣￣ * TX| 22 | | 01 |RST
* * ￣￣ AE￣￣
*/ */
#ifdef ESP_WIFI // Module ESP-WIFI
#define WIFI_IO0_PIN PA8 // PC13 MKS ESP WIFI IO0 PIN #define ESP_WIFI_MODULE_COM 2 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
#define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN #define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
#define WIFI_RESET_PIN PA5 // MKS ESP WIFI RESET PIN #define ESP_WIFI_MODULE_RESET_PIN PA5 // WIFI CTRL/RST
#endif #define ESP_WIFI_MODULE_ENABLE_PIN -1
#define ESP_WIFI_MODULE_TXD_PIN PA9 // MKS or ESP WIFI RX PIN
#define ESP_WIFI_MODULE_RXD_PIN PA10 // MKS or ESP WIFI TX PIN
#endif #endif
// //
// EXTRUDER // EXTRUDER
// //
#if AXIS_DRIVER_TYPE(E0,TMC2208)||AXIS_DRIVER_TYPE(E0,TMC2209) #if AXIS_DRIVER_TYPE_E0(TMC2208) || AXIS_DRIVER_TYPE_E0(TMC2209)
#define E0_SLAVE_ADDRESS 0
#define E0_SERIAL_TX_PIN PA8 // IO0 #define E0_SERIAL_TX_PIN PA8 // IO0
#define E0_SERIAL_RX_PIN PA8 // IO0 #define E0_SERIAL_RX_PIN PA8 // IO0
#define TMC_BAUD_RATE 19200 #define TMC_BAUD_RATE 19200
@ -199,7 +177,7 @@
#endif #endif
// //
// Temperature Sensors(THM) // Temperature Sensors (THM)
// //
#define TEMP_0_PIN PC1 // TEMP_E0 #define TEMP_0_PIN PC1 // TEMP_E0
#define TEMP_BED_PIN PC0 // TEMP_BED #define TEMP_BED_PIN PC0 // TEMP_BED
@ -211,7 +189,6 @@
#define HEATER_BED_PIN PA0 // HEATER_BED-WKUP #define HEATER_BED_PIN PA0 // HEATER_BED-WKUP
#define FAN_PIN PB1 // E_FAN #define FAN_PIN PB1 // E_FAN
//#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
// //
// Misc. Functions // Misc. Functions
@ -221,12 +198,24 @@
#define POWER_LOSS_PIN PA2 // PW_DET (UPS) MKSPWC #define POWER_LOSS_PIN PA2 // PW_DET (UPS) MKSPWC
#endif #endif
/**
* Connector J2
* -------
* DIO O|1 2|O 3v3
* CSK O|3 5|O GND
* RST O|5 6|O GND
* -------
*/
//#define SW_DIO PA13
//#define SW_CLK PA14
//#define SW_RST NRST // (14)
// //
// Power Supply Control // Power Supply Control
// //
#if ENABLED(PSU_CONTROL) #if ENABLED(PSU_CONTROL)
#define KILL_PIN PA2 // PW_DET #define KILL_PIN PA2 // PW_DET
#define KILL_PIN_INVERTING true // #define KILL_PIN_INVERTING true
//#define PS_ON_PIN PA3 // PW_CN /PW_OFF //#define PS_ON_PIN PA3 // PW_CN /PW_OFF
#endif #endif
@ -240,28 +229,33 @@
//#define LED_PIN PB2 // BOOT1 //#define LED_PIN PB2 // BOOT1
#if ENABLED(NEOPIXEL_LED) #if ENABLED(NEOPIXEL_LED)
#define LED_PWM PA8 #define LED_PWM PC7 // IO1
#ifndef NEOPIXEL_PIN #ifndef NEOPIXEL_PIN
#define NEOPIXEL_PIN LED_PWM // USED WIFI IO0/IO1/TX/RX PIN #define NEOPIXEL_PIN LED_PWM // USED WIFI IO0/IO1 PIN
#endif #endif
#endif #endif
//Others test.
//#define SERVO0_PIN PA5 // WIFI CRTL
//#define GPIO_CLEAR PA8 // IO0
//#define GPIO_SET PA5
// //
// SD Card // SD Card
// //
#define SDIO_SUPPORT #ifndef SDCARD_CONNECTION
#define SDIO_CLOCK 4500000 // 4.5 MHz /* 18 MHz (18000000) or 4.5MHz (450000) */ #define SDCARD_CONNECTION ONBOARD
//#define SDIO_CLOCK 18000000 // 18 MHz (18000000) #endif
#if ENABLED(SDIO_SUPPORT)
#define SCK_PIN PB13 // SPI2 // Use the on-board card socket labeled SD_Extender
#define MISO_PIN PB14 // SPI2 #if SD_CONNECTION_IS(CUSTOM_CABLE)
#define MOSI_PIN PB15 // SPI2 #define SCK_PIN PC12
#define SD_DETECT_PIN PD12 // SD_CD #define MISO_PIN PC8
#define MOSI_PIN PD2
#define SS_PIN -1
#define SD_DETECT_PIN PD12 // SD_CD (if -1 no detection)
#else
#define SDIO_SUPPORT
#define SDIO_CLOCK 4500000 // 4.5 MHz
#define SDIO_READ_RETRIES 16
#define ONBOARD_SPI_DEVICE 1 // SPI1
#define ONBOARD_SD_CS_PIN PC11
#define SD_DETECT_PIN -1 // SD_CD (-1 active refresh)
#endif #endif
// //
@ -271,6 +265,10 @@
#define BEEPER_PIN PC5 #define BEEPER_PIN PC5
#endif #endif
#if ENABLED(SPEAKER) && BEEPER_PIN == PC5
#error "FLSun HiSpeed default BEEPER_PIN is not a SPEAKER."
#endif
/** /**
* Note: MKS Robin TFT screens use various TFT controllers * Note: MKS Robin TFT screens use various TFT controllers
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
@ -284,26 +282,7 @@
* because Marlin uses the reset as a failsafe to revive a glitchy LCD. * because Marlin uses the reset as a failsafe to revive a glitchy LCD.
*/ */
// MKS Robin TFT v2.0 with ILI9341 // QQS-Pro uses MKS Robin TFT v2.0 320x240
// Read display identification information (0xD3 on ILI9341)
//#define TOUCH_CALIBRATION_X 12013
//#define TOUCH_CALIBRATION_Y -8711
//#define TOUCH_OFFSET_X -32
//#define TOUCH_OFFSET_Y 256
// MKS Robin TFT v1.1 with ILI9328
//#define TOUCH_CALIBRATION_X -11792
//#define TOUCH_CALIBRATION_Y 8947
//#define TOUCH_OFFSET_X 342
//#define TOUCH_OFFSET_Y -19
// MKS Robin TFT v1.1 with R61505
//#define TOUCH_CALIBRATION_X 12489
//#define TOUCH_CALIBRATION_Y 9210
//#define TOUCH_OFFSET_X -52
//#define TOUCH_OFFSET_Y -17
// QQS-Pro uses MKS Robin TFT v2.0
// Shared FSMC Configs // Shared FSMC Configs
#if HAS_FSMC_TFT #if HAS_FSMC_TFT
@ -320,8 +299,13 @@
#define FSMC_DMA_DEV DMA2 #define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5 #define FSMC_DMA_CHANNEL DMA_CH5
#define TOUCH_BUTTONS_HW_SPI #define TFT_BUFFER_SIZE 14400
#define TOUCH_BUTTONS_HW_SPI_DEVICE 2 #if ENABLED(TFT_CLASSIC_UI)
#define TFT_MARLINBG_COLOR 0x3186 // White
#define TFT_MARLINUI_COLOR 0xC7B6 // green
#define TFT_BTARROWS_COLOR 0xDEE6 // Yellow
#define TFT_BTOKMENU_COLOR 0x145F // Cyan
#endif
#endif #endif
#if NEED_TOUCH_PINS #if NEED_TOUCH_PINS

Write Preview
Loading…
Cancel
Save