melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Unify step pulse timing of ISR / babystep (#16813)

Browse Source
2.0.x
Scott Lahteine 5 years ago committed by GitHub
parent d8b2726fd3
commit 2836834d7e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 73 additions and 87 deletions
Show Stats Download Patch File Download Diff File

160
Marlin/src/module/stepper.cpp
Unescape Escape View File

@ -402,6 +402,7 @@ constexpr uint32_t NS_TO_PULSE_TIMER_TICKS(uint32_t NS) { return (NS + (NS_PER_P
#define PULSE_HIGH_TICK_COUNT hal_timer_t(NS_TO_PULSE_TIMER_TICKS(_MIN_PULSE_HIGH_NS - _MIN(_MIN_PULSE_HIGH_NS, TIMER_SETUP_NS))) #define PULSE_HIGH_TICK_COUNT hal_timer_t(NS_TO_PULSE_TIMER_TICKS(_MIN_PULSE_HIGH_NS - _MIN(_MIN_PULSE_HIGH_NS, TIMER_SETUP_NS)))
#define PULSE_LOW_TICK_COUNT hal_timer_t(NS_TO_PULSE_TIMER_TICKS(_MIN_PULSE_LOW_NS - _MIN(_MIN_PULSE_LOW_NS, TIMER_SETUP_NS))) #define PULSE_LOW_TICK_COUNT hal_timer_t(NS_TO_PULSE_TIMER_TICKS(_MIN_PULSE_LOW_NS - _MIN(_MIN_PULSE_LOW_NS, TIMER_SETUP_NS)))
#define USING_TIMED_PULSE() hal_timer_t end_tick_count = 0
#define START_TIMED_PULSE(DIR) (end_tick_count = HAL_timer_get_count(PULSE_TIMER_NUM) + PULSE_##DIR##_TICK_COUNT) #define START_TIMED_PULSE(DIR) (end_tick_count = HAL_timer_get_count(PULSE_TIMER_NUM) + PULSE_##DIR##_TICK_COUNT)
#define AWAIT_TIMED_PULSE() while (HAL_timer_get_count(PULSE_TIMER_NUM) < end_tick_count) { } #define AWAIT_TIMED_PULSE() while (HAL_timer_get_count(PULSE_TIMER_NUM) < end_tick_count) { }
#define START_HIGH_PULSE() START_TIMED_PULSE(HIGH) #define START_HIGH_PULSE() START_TIMED_PULSE(HIGH)
@ -409,6 +410,18 @@ constexpr uint32_t NS_TO_PULSE_TIMER_TICKS(uint32_t NS) { return (NS + (NS_PER_P
#define AWAIT_HIGH_PULSE() AWAIT_TIMED_PULSE() #define AWAIT_HIGH_PULSE() AWAIT_TIMED_PULSE()
#define AWAIT_LOW_PULSE() AWAIT_TIMED_PULSE() #define AWAIT_LOW_PULSE() AWAIT_TIMED_PULSE()
#if MINIMUM_STEPPER_PRE_DIR_DELAY > 0
#define DIR_WAIT_BEFORE() DELAY_NS(MINIMUM_STEPPER_PRE_DIR_DELAY)
#else
#define DIR_WAIT_BEFORE()
#endif
#if MINIMUM_STEPPER_POST_DIR_DELAY > 0
#define DIR_WAIT_AFTER() DELAY_NS(MINIMUM_STEPPER_POST_DIR_DELAY)
#else
#define DIR_WAIT_AFTER()
#endif
void Stepper::wake_up() { void Stepper::wake_up() {
// TCNT1 = 0; // TCNT1 = 0;
ENABLE_STEPPER_DRIVER_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT();
@ -423,9 +436,7 @@ void Stepper::wake_up() {
*/ */
void Stepper::set_directions() { void Stepper::set_directions() {
#if MINIMUM_STEPPER_PRE_DIR_DELAY > 0 DIR_WAIT_BEFORE();
DELAY_NS(MINIMUM_STEPPER_PRE_DIR_DELAY);
#endif
#define SET_STEP_DIR(A) \ #define SET_STEP_DIR(A) \
if (motor_direction(_AXIS(A))) { \ if (motor_direction(_AXIS(A))) { \
@ -494,10 +505,7 @@ void Stepper::set_directions() {
} }
#endif #endif
// A small delay may be needed after changing direction DIR_WAIT_AFTER();
#if MINIMUM_STEPPER_POST_DIR_DELAY > 0
DELAY_NS(MINIMUM_STEPPER_POST_DIR_DELAY);
#endif
} }
#if ENABLED(S_CURVE_ACCELERATION) #if ENABLED(S_CURVE_ACCELERATION)
@ -1488,12 +1496,12 @@ void Stepper::stepper_pulse_phase_isr() {
// Take multiple steps per interrupt (For high speed moves) // Take multiple steps per interrupt (For high speed moves)
#if ISR_MULTI_STEPS #if ISR_MULTI_STEPS
bool firstStep = true; bool firstStep = true;
hal_timer_t end_tick_count = 0; USING_TIMED_PULSE();
#endif #endif
xyze_bool_t step_needed{0}; xyze_bool_t step_needed{0};
do { do {
#define _APPLY_STEP(AXIS) AXIS ##_APPLY_STEP #define _APPLY_STEP(AXIS, INV, ALWAYS) AXIS ##_APPLY_STEP(INV, ALWAYS)
#define _INVERT_STEP_PIN(AXIS) INVERT_## AXIS ##_STEP_PIN #define _INVERT_STEP_PIN(AXIS) INVERT_## AXIS ##_STEP_PIN
// Determine if a pulse is needed using Bresenham // Determine if a pulse is needed using Bresenham
@ -1509,14 +1517,14 @@ void Stepper::stepper_pulse_phase_isr() {
// Start an active pulse, if Bresenham says so, and update position // Start an active pulse, if Bresenham says so, and update position
#define PULSE_START(AXIS) do{ \ #define PULSE_START(AXIS) do{ \
if (step_needed[_AXIS(AXIS)]) { \ if (step_needed[_AXIS(AXIS)]) { \
_APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), 0); \ _APPLY_STEP(AXIS, !_INVERT_STEP_PIN(AXIS), 0); \
} \ } \
}while(0) }while(0)
// Stop an active pulse, if any, and adjust error term // Stop an active pulse, if any, and adjust error term
#define PULSE_STOP(AXIS) do { \ #define PULSE_STOP(AXIS) do { \
if (step_needed[_AXIS(AXIS)]) { \ if (step_needed[_AXIS(AXIS)]) { \
_APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS), 0); \ _APPLY_STEP(AXIS, _INVERT_STEP_PIN(AXIS), 0); \
} \ } \
}while(0) }while(0)
@ -1978,9 +1986,7 @@ uint32_t Stepper::stepper_block_phase_isr() {
else else
interval = LA_ADV_NEVER; interval = LA_ADV_NEVER;
#if MINIMUM_STEPPER_PRE_DIR_DELAY > 0 DIR_WAIT_BEFORE();
DELAY_NS(MINIMUM_STEPPER_PRE_DIR_DELAY);
#endif
#if ENABLED(MIXING_EXTRUDER) #if ENABLED(MIXING_EXTRUDER)
// We don't know which steppers will be stepped because LA loop follows, // We don't know which steppers will be stepped because LA loop follows,
@ -1996,17 +2002,14 @@ uint32_t Stepper::stepper_block_phase_isr() {
REV_E_DIR(stepper_extruder); REV_E_DIR(stepper_extruder);
#endif #endif
// A small delay may be needed after changing direction DIR_WAIT_AFTER();
#if MINIMUM_STEPPER_POST_DIR_DELAY > 0
DELAY_NS(MINIMUM_STEPPER_POST_DIR_DELAY);
#endif
//const hal_timer_t added_step_ticks = hal_timer_t(ADDED_STEP_TICKS); //const hal_timer_t added_step_ticks = hal_timer_t(ADDED_STEP_TICKS);
// Step E stepper if we have steps // Step E stepper if we have steps
#if ISR_MULTI_STEPS #if ISR_MULTI_STEPS
bool firstStep = true; bool firstStep = true;
hal_timer_t end_tick_count = 0; USING_TIMED_PULSE();
#endif #endif
while (LA_steps) { while (LA_steps) {
@ -2424,57 +2427,52 @@ void Stepper::report_positions() {
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
#if MINIMUM_STEPPER_PULSE
#define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
#else
#define STEP_PULSE_CYCLES 0
#endif
#if ENABLED(DELTA)
#define CYCLES_EATEN_BABYSTEP (2 * 15)
#else
#define CYCLES_EATEN_BABYSTEP 0
#endif
#define EXTRA_CYCLES_BABYSTEP (STEP_PULSE_CYCLES - (CYCLES_EATEN_BABYSTEP))
#define _ENABLE_AXIS(AXIS) ENABLE_AXIS_## AXIS() #define _ENABLE_AXIS(AXIS) ENABLE_AXIS_## AXIS()
#define _READ_DIR(AXIS) AXIS ##_DIR_READ() #define _READ_DIR(AXIS) AXIS ##_DIR_READ()
#define _INVERT_DIR(AXIS) INVERT_## AXIS ##_DIR #define _INVERT_DIR(AXIS) INVERT_## AXIS ##_DIR
#define _APPLY_DIR(AXIS, INVERT) AXIS ##_APPLY_DIR(INVERT, true) #define _APPLY_DIR(AXIS, INVERT) AXIS ##_APPLY_DIR(INVERT, true)
#if EXTRA_CYCLES_BABYSTEP > 20 #if DISABLED(DELTA)
#define _SAVE_START const hal_timer_t pulse_start = HAL_timer_get_count(PULSE_TIMER_NUM) #define BABYSTEP_AXIS(AXIS, INV, DIR) do{ \
#define _PULSE_WAIT while (EXTRA_CYCLES_BABYSTEP > (uint32_t)(HAL_timer_get_count(PULSE_TIMER_NUM) - pulse_start) * (PULSE_TIMER_PRESCALE)) { /* nada */ }
#else
#define _SAVE_START NOOP
#if EXTRA_CYCLES_BABYSTEP > 0
#define _PULSE_WAIT DELAY_NS(EXTRA_CYCLES_BABYSTEP * NANOSECONDS_PER_CYCLE)
#elif ENABLED(DELTA)
#define _PULSE_WAIT DELAY_US(2);
#elif STEP_PULSE_CYCLES > 0
#define _PULSE_WAIT NOOP
#else
#define _PULSE_WAIT DELAY_US(4);
#endif
#endif
#define BABYSTEP_AXIS(AXIS, INVERT, DIR) { \
const uint8_t old_dir = _READ_DIR(AXIS); \ const uint8_t old_dir = _READ_DIR(AXIS); \
_ENABLE_AXIS(AXIS); \ _ENABLE_AXIS(AXIS); \
DELAY_NS(MINIMUM_STEPPER_PRE_DIR_DELAY); \ DIR_WAIT_BEFORE(); \
_APPLY_DIR(AXIS, _INVERT_DIR(AXIS)^DIR^INVERT); \ _APPLY_DIR(AXIS, _INVERT_DIR(AXIS)^DIR^INV); \
DELAY_NS(MINIMUM_STEPPER_POST_DIR_DELAY); \ DIR_WAIT_AFTER(); \
_SAVE_START; \ USING_TIMED_PULSE(); \
_APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), true); \ START_HIGH_PULSE(); \
_PULSE_WAIT; \ _APPLY_STEP(AXIS, !_INVERT_STEP_PIN(AXIS), true); \
_APPLY_STEP(AXIS)(_INVERT_STEP_PIN(AXIS), true); \ AWAIT_HIGH_PULSE(); \
_APPLY_STEP(AXIS, _INVERT_STEP_PIN(AXIS), true); \
_APPLY_DIR(AXIS, old_dir); \ _APPLY_DIR(AXIS, old_dir); \
} }while(0)
#endif
#if IS_CORE
#define BABYSTEP_CORE(A, B, INV, DIR) do{ \
const xy_byte_t old_dir = { _READ_DIR(A), _READ_DIR(B) }; \
_ENABLE_AXIS(A); _ENABLE_AXIS(B); \
DIR_WAIT_BEFORE(); \
_APPLY_DIR(A, _INVERT_DIR(A)^DIR^INV); \
_APPLY_DIR(B, _INVERT_DIR(B)^DIR^INV^(CORESIGN(1)<0)); \
DIR_WAIT_AFTER(); \
USING_TIMED_PULSE(); \
START_HIGH_PULSE(); \
_APPLY_STEP(A, !_INVERT_STEP_PIN(A), true); \
_APPLY_STEP(B, !_INVERT_STEP_PIN(B), true); \
AWAIT_HIGH_PULSE(); \
_APPLY_STEP(A, _INVERT_STEP_PIN(A), true); \
_APPLY_STEP(B, _INVERT_STEP_PIN(B), true); \
_APPLY_DIR(A, old_dir.a); _APPLY_DIR(B, old_dir.b); \
}while(0)
#endif
// MUST ONLY BE CALLED BY AN ISR, // MUST ONLY BE CALLED BY AN ISR,
// No other ISR should ever interrupt this! // No other ISR should ever interrupt this!
void Stepper::babystep(const AxisEnum axis, const bool direction) { void Stepper::babystep(const AxisEnum axis, const bool direction) {
cli(); DISABLE_ISRS();
USING_TIMED_PULSE();
switch (axis) { switch (axis) {
@ -2482,11 +2480,9 @@ void Stepper::report_positions() {
case X_AXIS: case X_AXIS:
#if CORE_IS_XY #if CORE_IS_XY
BABYSTEP_AXIS(X, false, direction); BABYSTEP_CORE(X, Y, false, direction);
BABYSTEP_AXIS(Y, false, direction);
#elif CORE_IS_XZ #elif CORE_IS_XZ
BABYSTEP_AXIS(X, false, direction); BABYSTEP_CORE(X, Z, false, direction);
BABYSTEP_AXIS(Z, false, direction);
#else #else
BABYSTEP_AXIS(X, false, direction); BABYSTEP_AXIS(X, false, direction);
#endif #endif
@ -2494,11 +2490,9 @@ void Stepper::report_positions() {
case Y_AXIS: case Y_AXIS:
#if CORE_IS_XY #if CORE_IS_XY
BABYSTEP_AXIS(X, false, direction); BABYSTEP_CORE(X, Y, false, direction);
BABYSTEP_AXIS(Y, false, direction^(CORESIGN(1)<0));
#elif CORE_IS_YZ #elif CORE_IS_YZ
BABYSTEP_AXIS(Y, false, direction); BABYSTEP_CORE(Y, Z, false, direction);
BABYSTEP_AXIS(Z, false, direction^(CORESIGN(1)<0));
#else #else
BABYSTEP_AXIS(Y, false, direction); BABYSTEP_AXIS(Y, false, direction);
#endif #endif
@ -2509,13 +2503,9 @@ void Stepper::report_positions() {
case Z_AXIS: { case Z_AXIS: {
#if CORE_IS_XZ #if CORE_IS_XZ
BABYSTEP_AXIS(X, BABYSTEP_INVERT_Z, direction); BABYSTEP_CORE(X, Z, BABYSTEP_INVERT_Z, direction);
BABYSTEP_AXIS(Z, BABYSTEP_INVERT_Z, direction^(CORESIGN(1)<0));
#elif CORE_IS_YZ #elif CORE_IS_YZ
BABYSTEP_AXIS(Y, BABYSTEP_INVERT_Z, direction); BABYSTEP_CORE(Y, Z, BABYSTEP_INVERT_Z, direction);
BABYSTEP_AXIS(Z, BABYSTEP_INVERT_Z, direction^(CORESIGN(1)<0));
#elif DISABLED(DELTA) #elif DISABLED(DELTA)
BABYSTEP_AXIS(Z, BABYSTEP_INVERT_Z, direction); BABYSTEP_AXIS(Z, BABYSTEP_INVERT_Z, direction);
@ -2527,38 +2517,32 @@ void Stepper::report_positions() {
ENABLE_AXIS_Y(); ENABLE_AXIS_Y();
ENABLE_AXIS_Z(); ENABLE_AXIS_Z();
#if MINIMUM_STEPPER_PRE_DIR_DELAY > 0 DIR_WAIT_BEFORE();
DELAY_NS(MINIMUM_STEPPER_PRE_DIR_DELAY);
#endif
const uint8_t old_x_dir_pin = X_DIR_READ(), const xyz_byte_t old_dir = { X_DIR_READ(), Y_DIR_READ(), Z_DIR_READ() };
old_y_dir_pin = Y_DIR_READ(),
old_z_dir_pin = Z_DIR_READ();
X_DIR_WRITE(INVERT_X_DIR ^ z_direction); X_DIR_WRITE(INVERT_X_DIR ^ z_direction);
Y_DIR_WRITE(INVERT_Y_DIR ^ z_direction); Y_DIR_WRITE(INVERT_Y_DIR ^ z_direction);
Z_DIR_WRITE(INVERT_Z_DIR ^ z_direction); Z_DIR_WRITE(INVERT_Z_DIR ^ z_direction);
#if MINIMUM_STEPPER_POST_DIR_DELAY > 0 DIR_WAIT_AFTER();
DELAY_NS(MINIMUM_STEPPER_POST_DIR_DELAY);
#endif
_SAVE_START; START_HIGH_PULSE();
X_STEP_WRITE(!INVERT_X_STEP_PIN); X_STEP_WRITE(!INVERT_X_STEP_PIN);
Y_STEP_WRITE(!INVERT_Y_STEP_PIN); Y_STEP_WRITE(!INVERT_Y_STEP_PIN);
Z_STEP_WRITE(!INVERT_Z_STEP_PIN); Z_STEP_WRITE(!INVERT_Z_STEP_PIN);
_PULSE_WAIT; AWAIT_HIGH_PULSE();
X_STEP_WRITE(INVERT_X_STEP_PIN); X_STEP_WRITE(INVERT_X_STEP_PIN);
Y_STEP_WRITE(INVERT_Y_STEP_PIN); Y_STEP_WRITE(INVERT_Y_STEP_PIN);
Z_STEP_WRITE(INVERT_Z_STEP_PIN); Z_STEP_WRITE(INVERT_Z_STEP_PIN);
// Restore direction bits // Restore direction bits
X_DIR_WRITE(old_x_dir_pin); X_DIR_WRITE(old_dir.x);
Y_DIR_WRITE(old_y_dir_pin); Y_DIR_WRITE(old_dir.y);
Z_DIR_WRITE(old_z_dir_pin); Z_DIR_WRITE(old_dir.z);
#endif #endif
@ -2566,7 +2550,9 @@ void Stepper::report_positions() {
default: break; default: break;
} }
sei();
START_LOW_PULSE(); AWAIT_LOW_PULSE(); // Prevent Stepper::ISR pulsing too soon
ENABLE_ISRS(); // Now it's ok for the ISR to run
} }
#endif // BABYSTEPPING #endif // BABYSTEPPING

Write Preview
Loading…
Cancel
Save