melch
/
Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

🎨 Apply F() to various reports

Browse Source
x301
Scott Lahteine 3 years ago
parent cabd538fdd
commit 24dbeceb45
30 changed files with 286 additions and 289 deletions
Show Stats Download Patch File Download Diff File

36
Marlin/src/HAL/shared/Delay.cpp
Unescape Escape View File

@ -108,13 +108,14 @@
#if ENABLED(MARLIN_DEV_MODE)
void dump_delay_accuracy_check() {
auto report_call_time = [](PGM_P const name, PGM_P const unit, const uint32_t cycles, const uint32_t total, const bool do_flush=true) {
auto report_call_time = [](FSTR_P const name, FSTR_P const unit, const uint32_t cycles, const uint32_t total, const bool do_flush=true) {
SERIAL_ECHOPGM("Calling ");
SERIAL_ECHOPGM_P(name);
SERIAL_ECHOF(name);
SERIAL_ECHOLNPGM(" for ", cycles);
SERIAL_ECHOPGM_P(unit);
SERIAL_ECHOF(unit);
SERIAL_ECHOLNPGM(" took: ", total);
SERIAL_ECHOPGM_P(unit);
SERIAL_CHAR(' ');
SERIAL_ECHOF(unit);
if (do_flush) SERIAL_FLUSHTX();
};
@ -126,41 +127,42 @@
constexpr uint32_t testValues[] = { 1, 5, 10, 20, 50, 100, 150, 200, 350, 500, 750, 1000 };
for (auto i : testValues) {
s = micros(); DELAY_US(i); e = micros();
report_call_time(PSTR("delay"), PSTR("us"), i, e - s);
report_call_time(F("delay"), F("us"), i, e - s);
}
if (HW_REG(_DWT_CTRL)) {
static FSTR_P cyc = F("cycles");
static FSTR_P dcd = F("DELAY_CYCLES directly ");
for (auto i : testValues) {
s = HW_REG(_DWT_CYCCNT); DELAY_CYCLES(i); e = HW_REG(_DWT_CYCCNT);
report_call_time(PSTR("runtime delay"), PSTR("cycles"), i, e - s);
report_call_time(F("runtime delay"), cyc, i, e - s);
}
// Measure the delay to call a real function compared to a function pointer
s = HW_REG(_DWT_CYCCNT); delay_dwt(1); e = HW_REG(_DWT_CYCCNT);
report_call_time(PSTR("delay_dwt"), PSTR("cycles"), 1, e - s);
static PGMSTR(dcd, "DELAY_CYCLES directly ");
report_call_time(F("delay_dwt"), cyc, 1, e - s);
s = HW_REG(_DWT_CYCCNT); DELAY_CYCLES( 1); e = HW_REG(_DWT_CYCCNT);
report_call_time(dcd, PSTR("cycles"), 1, e - s, false);
report_call_time(dcd, cyc, 1, e - s, false);
s = HW_REG(_DWT_CYCCNT); DELAY_CYCLES( 5); e = HW_REG(_DWT_CYCCNT);
report_call_time(dcd, PSTR("cycles"), 5, e - s, false);
report_call_time(dcd, cyc, 5, e - s, false);
s = HW_REG(_DWT_CYCCNT); DELAY_CYCLES(10); e = HW_REG(_DWT_CYCCNT);
report_call_time(dcd, PSTR("cycles"), 10, e - s, false);
report_call_time(dcd, cyc, 10, e - s, false);
s = HW_REG(_DWT_CYCCNT); DELAY_CYCLES(20); e = HW_REG(_DWT_CYCCNT);
report_call_time(dcd, PSTR("cycles"), 20, e - s, false);
report_call_time(dcd, cyc, 20, e - s, false);
s = HW_REG(_DWT_CYCCNT); DELAY_CYCLES(50); e = HW_REG(_DWT_CYCCNT);
report_call_time(dcd, PSTR("cycles"), 50, e - s, false);
report_call_time(dcd, cyc, 50, e - s, false);
s = HW_REG(_DWT_CYCCNT); DELAY_CYCLES(100); e = HW_REG(_DWT_CYCCNT);
report_call_time(dcd, PSTR("cycles"), 100, e - s, false);
report_call_time(dcd, cyc, 100, e - s, false);
s = HW_REG(_DWT_CYCCNT); DELAY_CYCLES(200); e = HW_REG(_DWT_CYCCNT);
report_call_time(dcd, PSTR("cycles"), 200, e - s, false);
report_call_time(dcd, cyc, 200, e - s, false);
}
}
#endif // MARLIN_DEV_MODE
@ -170,7 +172,7 @@
void calibrate_delay_loop() {}
#if ENABLED(MARLIN_DEV_MODE)
void dump_delay_accuracy_check() { SERIAL_ECHOPGM_P(PSTR("N/A on this platform")); }
void dump_delay_accuracy_check() { SERIAL_ECHOPGM("N/A on this platform"); }
#endif
#endif

12
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
Unescape Escape View File

@ -1609,7 +1609,7 @@ void unified_bed_leveling::smart_fill_mesh() {
}
if (DEBUGGING(LEVELING)) {
rotation.debug(PSTR("rotation matrix:\n"));
rotation.debug(F("rotation matrix:\n"));
DEBUG_ECHOPAIR_F("LSF Results A=", lsf_results.A, 7);
DEBUG_ECHOPAIR_F(" B=", lsf_results.B, 7);
DEBUG_ECHOLNPAIR_F(" D=", lsf_results.D, 7);
@ -1636,14 +1636,14 @@ void unified_bed_leveling::smart_fill_mesh() {
auto normed = [&](const xy_pos_t &pos, const_float_t zadd) {
return normal.x * pos.x + normal.y * pos.y + zadd;
};
auto debug_pt = [](PGM_P const pre, const xy_pos_t &pos, const_float_t zadd) {
d_from(); SERIAL_ECHOPGM_P(pre);
auto debug_pt = [](FSTR_P const pre, const xy_pos_t &pos, const_float_t zadd) {
d_from(); SERIAL_ECHOF(pre);
DEBUG_ECHO_F(normed(pos, zadd), 6);
DEBUG_ECHOLNPAIR_F(" Z error = ", zadd - get_z_correction(pos), 6);
};
debug_pt(PSTR("1st point: "), probe_pt[0], normal.z * z1);
debug_pt(PSTR("2nd point: "), probe_pt[1], normal.z * z2);
debug_pt(PSTR("3rd point: "), probe_pt[2], normal.z * z3);
debug_pt(F("1st point: "), probe_pt[0], normal.z * z1);
debug_pt(F("2nd point: "), probe_pt[1], normal.z * z2);
debug_pt(F("3rd point: "), probe_pt[2], normal.z * z3);
d_from(); DEBUG_ECHOPGM("safe home with Z=");
DEBUG_ECHOLNPAIR_F("0 : ", normed(safe_homing_xy, 0), 6);
d_from(); DEBUG_ECHOPGM("safe home with Z=");

41
Marlin/src/feature/max7219.cpp
Unescape Escape View File

@ -124,11 +124,10 @@ uint8_t Max7219::suspended; // = 0;
#define SIG_DELAY() DELAY_NS(250)
#endif
void Max7219::error(const char * const func, const int32_t v1, const int32_t v2/*=-1*/) {
void Max7219::error(FSTR_P const func, const int32_t v1, const int32_t v2/*=-1*/) {
#if ENABLED(MAX7219_ERRORS)
SERIAL_ECHOPGM("??? Max7219::");
SERIAL_ECHOPGM_P(func);
SERIAL_CHAR('(');
SERIAL_ECHOF(func, AS_CHAR('('));
SERIAL_ECHO(v1);
if (v2 > 0) SERIAL_ECHOPGM(", ", v2);
SERIAL_CHAR(')');
@ -268,24 +267,24 @@ void Max7219::set(const uint8_t line, const uint8_t bits) {
// Modify a single LED bit and send the changed line
void Max7219::led_set(const uint8_t x, const uint8_t y, const bool on) {
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(PSTR("led_set"), x, y);
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(F("led_set"), x, y);
if (BIT_7219(x, y) == on) return;
XOR_7219(x, y);
refresh_unit_line(LED_IND(x, y));
}
void Max7219::led_on(const uint8_t x, const uint8_t y) {
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(PSTR("led_on"), x, y);
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(F("led_on"), x, y);
led_set(x, y, true);
}
void Max7219::led_off(const uint8_t x, const uint8_t y) {
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(PSTR("led_off"), x, y);
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(F("led_off"), x, y);
led_set(x, y, false);
}
void Max7219::led_toggle(const uint8_t x, const uint8_t y) {
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(PSTR("led_toggle"), x, y);
if (x >= MAX7219_X_LEDS || y >= MAX7219_Y_LEDS) return error(F("led_toggle"), x, y);
led_set(x, y, !BIT_7219(x, y));
}
@ -328,13 +327,13 @@ void Max7219::fill() {
}
void Max7219::clear_row(const uint8_t row) {
if (row >= MAX7219_Y_LEDS) return error(PSTR("clear_row"), row);
if (row >= MAX7219_Y_LEDS) return error(F("clear_row"), row);
LOOP_L_N(x, MAX7219_X_LEDS) CLR_7219(x, row);
send_row(row);
}
void Max7219::clear_column(const uint8_t col) {
if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col);
if (col >= MAX7219_X_LEDS) return error(F("set_column"), col);
LOOP_L_N(y, MAX7219_Y_LEDS) CLR_7219(col, y);
send_column(col);
}
@ -345,7 +344,7 @@ void Max7219::clear_column(const uint8_t col) {
* once with a single call to the function (if rotated 90° or 270°).
*/
void Max7219::set_row(const uint8_t row, const uint32_t val) {
if (row >= MAX7219_Y_LEDS) return error(PSTR("set_row"), row);
if (row >= MAX7219_Y_LEDS) return error(F("set_row"), row);
uint32_t mask = _BV32(MAX7219_X_LEDS - 1);
LOOP_L_N(x, MAX7219_X_LEDS) {
if (val & mask) SET_7219(x, row); else CLR_7219(x, row);
@ -360,7 +359,7 @@ void Max7219::set_row(const uint8_t row, const uint32_t val) {
* once with a single call to the function (if rotated 0° or 180°).
*/
void Max7219::set_column(const uint8_t col, const uint32_t val) {
if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col);
if (col >= MAX7219_X_LEDS) return error(F("set_column"), col);
uint32_t mask = _BV32(MAX7219_Y_LEDS - 1);
LOOP_L_N(y, MAX7219_Y_LEDS) {
if (val & mask) SET_7219(col, y); else CLR_7219(col, y);
@ -371,56 +370,56 @@ void Max7219::set_column(const uint8_t col, const uint32_t val) {
void Max7219::set_rows_16bits(const uint8_t y, uint32_t val) {
#if MAX7219_X_LEDS == 8
if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_16bits"), y, val);
if (y > MAX7219_Y_LEDS - 2) return error(F("set_rows_16bits"), y, val);
set_row(y + 1, val); val >>= 8;
set_row(y + 0, val);
#else // at least 16 bits on each row
if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_16bits"), y, val);
if (y > MAX7219_Y_LEDS - 1) return error(F("set_rows_16bits"), y, val);
set_row(y, val);
#endif
}
void Max7219::set_rows_32bits(const uint8_t y, uint32_t val) {
#if MAX7219_X_LEDS == 8
if (y > MAX7219_Y_LEDS - 4) return error(PSTR("set_rows_32bits"), y, val);
if (y > MAX7219_Y_LEDS - 4) return error(F("set_rows_32bits"), y, val);
set_row(y + 3, val); val >>= 8;
set_row(y + 2, val); val >>= 8;
set_row(y + 1, val); val >>= 8;
set_row(y + 0, val);
#elif MAX7219_X_LEDS == 16
if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_32bits"), y, val);
if (y > MAX7219_Y_LEDS - 2) return error(F("set_rows_32bits"), y, val);
set_row(y + 1, val); val >>= 16;
set_row(y + 0, val);
#else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits
if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_32bits"), y, val);
if (y > MAX7219_Y_LEDS - 1) return error(F("set_rows_32bits"), y, val);
set_row(y, val);
#endif
}
void Max7219::set_columns_16bits(const uint8_t x, uint32_t val) {
#if MAX7219_Y_LEDS == 8
if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_columns_16bits"), x, val);
if (x > MAX7219_X_LEDS - 2) return error(F("set_columns_16bits"), x, val);
set_column(x + 0, val); val >>= 8;
set_column(x + 1, val);
#else // at least 16 bits in each column
if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_columns_16bits"), x, val);
if (x > MAX7219_X_LEDS - 1) return error(F("set_columns_16bits"), x, val);
set_column(x, val);
#endif
}
void Max7219::set_columns_32bits(const uint8_t x, uint32_t val) {
#if MAX7219_Y_LEDS == 8
if (x > MAX7219_X_LEDS - 4) return error(PSTR("set_rows_32bits"), x, val);
if (x > MAX7219_X_LEDS - 4) return error(F("set_rows_32bits"), x, val);
set_column(x + 3, val); val >>= 8;
set_column(x + 2, val); val >>= 8;
set_column(x + 1, val); val >>= 8;
set_column(x + 0, val);
#elif MAX7219_Y_LEDS == 16
if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_rows_32bits"), x, val);
if (x > MAX7219_X_LEDS - 2) return error(F("set_rows_32bits"), x, val);
set_column(x + 1, val); val >>= 16;
set_column(x + 0, val);
#else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits
if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_rows_32bits"), x, val);
if (x > MAX7219_X_LEDS - 1) return error(F("set_rows_32bits"), x, val);
set_column(x, val);
#endif
}

4
Marlin/src/feature/max7219.h
Unescape Escape View File

@ -42,6 +42,8 @@
* a Max7219_Set_Row(). The opposite is true for rotations of 0 or 180 degrees.
*/
#include "../inc/MarlinConfig.h"
#ifndef MAX7219_ROTATE
#define MAX7219_ROTATE 0
#endif
@ -140,7 +142,7 @@ public:
private:
static uint8_t suspended;
static void error(const char * const func, const int32_t v1, const int32_t v2=-1);
static void error(FSTR_P const func, const int32_t v1, const int32_t v2=-1);
static void noop();
static void set(const uint8_t line, const uint8_t bits);
static void send_row(const uint8_t row);

8
Marlin/src/feature/powerloss.cpp
Unescape Escape View File

@ -130,7 +130,7 @@ void PrintJobRecovery::load() {
(void)file.read(&info, sizeof(info));
close();
}
debug(PSTR("Load"));
debug(F("Load"));
}
/**
@ -311,7 +311,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=POW
*/
void PrintJobRecovery::write() {
debug(PSTR("Write"));
debug(F("Write"));
open(false);
file.seekSet(0);
@ -575,8 +575,8 @@ void PrintJobRecovery::resume() {
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
void PrintJobRecovery::debug(PGM_P const prefix) {
DEBUG_ECHOPGM_P(prefix);
void PrintJobRecovery::debug(FSTR_P const prefix) {
DEBUG_ECHOF(prefix);
DEBUG_ECHOLNPGM(" Job Recovery Info...\nvalid_head:", info.valid_head, " valid_foot:", info.valid_foot);
if (info.valid_head) {
if (info.valid_head == info.valid_foot) {

4
Marlin/src/feature/powerloss.h
Unescape Escape View File

@ -204,9 +204,9 @@ class PrintJobRecovery {
static inline bool valid() { return info.valid() && interrupted_file_exists(); }
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
static void debug(PGM_P const prefix);
static void debug(FSTR_P const prefix);
#else
static inline void debug(PGM_P const) {}
static inline void debug(FSTR_P const) {}
#endif
private:

12
Marlin/src/feature/stepper_driver_safety.cpp
Unescape Escape View File

@ -28,11 +28,11 @@
static uint32_t axis_plug_backward = 0;
void stepper_driver_backward_error(PGM_P str) {
void stepper_driver_backward_error(FSTR_P const fstr) {
SERIAL_ERROR_START();
SERIAL_ECHOPGM_P(str);
SERIAL_ECHOF(fstr);
SERIAL_ECHOLNPGM(" driver is backward!");
ui.status_printf(2, F(S_FMT S_FMT), str, GET_TEXT(MSG_DRIVER_BACKWARD));
ui.status_printf(2, F(S_FMT S_FMT), FTOP(fstr), GET_TEXT(MSG_DRIVER_BACKWARD));
}
void stepper_driver_backward_check() {
@ -45,7 +45,7 @@ void stepper_driver_backward_check() {
delay(20); \
if (READ(AXIS##_ENABLE_PIN) == false) { \
SBI(axis_plug_backward, BIT); \
stepper_driver_backward_error(PSTR(STRINGIFY(AXIS))); \
stepper_driver_backward_error(F(STRINGIFY(AXIS))); \
} \
}while(0)
@ -82,12 +82,12 @@ void stepper_driver_backward_check() {
void stepper_driver_backward_report() {
if (!axis_plug_backward) return;
auto _report_if_backward = [](PGM_P axis, uint8_t bit) {
auto _report_if_backward = [](FSTR_P const axis, uint8_t bit) {
if (TEST(axis_plug_backward, bit))
stepper_driver_backward_error(axis);
};
#define REPORT_BACKWARD(axis, bit) TERN_(HAS_##axis##_ENABLE, _report_if_backward(PSTR(STRINGIFY(axis)), bit))
#define REPORT_BACKWARD(axis, bit) TERN_(HAS_##axis##_ENABLE, _report_if_backward(F(STRINGIFY(axis)), bit))
REPORT_BACKWARD(X, 0);
REPORT_BACKWARD(X2, 1);

46
Marlin/src/feature/twibus.cpp
Unescape Escape View File

@ -51,27 +51,27 @@ void TWIBus::address(const uint8_t adr) {
addr = adr;
debug(PSTR("address"), adr);
debug(F("address"), adr);
}
void TWIBus::addbyte(const char c) {
if (buffer_s >= COUNT(buffer)) return;
buffer[buffer_s++] = c;
debug(PSTR("addbyte"), c);
debug(F("addbyte"), c);
}
void TWIBus::addbytes(char src[], uint8_t bytes) {
debug(PSTR("addbytes"), bytes);
debug(F("addbytes"), bytes);
while (bytes--) addbyte(*src++);
}
void TWIBus::addstring(char str[]) {
debug(PSTR("addstring"), str);
debug(F("addstring"), str);
while (char c = *str++) addbyte(c);
}
void TWIBus::send() {
debug(PSTR("send"), addr);
debug(F("send"), addr);
Wire.beginTransmission(I2C_ADDRESS(addr));
Wire.write(buffer, buffer_s);
@ -81,20 +81,20 @@ void TWIBus::send() {
}
// static
void TWIBus::echoprefix(uint8_t bytes, const char pref[], uint8_t adr) {
void TWIBus::echoprefix(uint8_t bytes, FSTR_P const pref, uint8_t adr) {
SERIAL_ECHO_START();
SERIAL_ECHOPGM_P(pref);
SERIAL_ECHOF(pref);
SERIAL_ECHOPGM(": from:", adr, " bytes:", bytes, " data:");
}
// static
void TWIBus::echodata(uint8_t bytes, const char pref[], uint8_t adr) {
void TWIBus::echodata(uint8_t bytes, FSTR_P const pref, uint8_t adr) {
echoprefix(bytes, pref, adr);
while (bytes-- && Wire.available()) SERIAL_CHAR(Wire.read());
SERIAL_EOL();
}
void TWIBus::echobuffer(const char pref[], uint8_t adr) {
void TWIBus::echobuffer(FSTR_P const pref, uint8_t adr) {
echoprefix(buffer_s, pref, adr);
LOOP_L_N(i, buffer_s) SERIAL_CHAR(buffer[i]);
SERIAL_EOL();
@ -103,11 +103,11 @@ void TWIBus::echobuffer(const char pref[], uint8_t adr) {
bool TWIBus::request(const uint8_t bytes) {
if (!addr) return false;
debug(PSTR("request"), bytes);
debug(F("request"), bytes);
// requestFrom() is a blocking function
if (Wire.requestFrom(I2C_ADDRESS(addr), bytes) == 0) {
debug("request fail", I2C_ADDRESS(addr));
debug(F("request fail"), I2C_ADDRESS(addr));
return false;
}
@ -115,10 +115,10 @@ bool TWIBus::request(const uint8_t bytes) {
}
void TWIBus::relay(const uint8_t bytes) {
debug(PSTR("relay"), bytes);
debug(F("relay"), bytes);
if (request(bytes))
echodata(bytes, PSTR("i2c-reply"), addr);
echodata(bytes, F("i2c-reply"), addr);
}
uint8_t TWIBus::capture(char *dst, const uint8_t bytes) {
@ -127,7 +127,7 @@ uint8_t TWIBus::capture(char *dst, const uint8_t bytes) {
while (count < bytes && Wire.available())
dst[count++] = Wire.read();
debug(PSTR("capture"), count);
debug(F("capture"), count);
return count;
}
@ -140,12 +140,12 @@ void TWIBus::flush() {
#if I2C_SLAVE_ADDRESS > 0
void TWIBus::receive(uint8_t bytes) {
debug(PSTR("receive"), bytes);
echodata(bytes, PSTR("i2c-receive"), 0);
debug(F("receive"), bytes);
echodata(bytes, F("i2c-receive"), 0);
}
void TWIBus::reply(char str[]/*=nullptr*/) {
debug(PSTR("reply"), str);
debug(F("reply"), str);
if (str) {
reset();
@ -170,18 +170,16 @@ void TWIBus::flush() {
#if ENABLED(DEBUG_TWIBUS)
// static
void TWIBus::prefix(const char func[]) {
SERIAL_ECHOPGM("TWIBus::");
SERIAL_ECHOPGM_P(func);
SERIAL_ECHOPGM(": ");
void TWIBus::prefix(FSTR_P const func) {
SERIAL_ECHOPGM("TWIBus::", func, ": ");
}
void TWIBus::debug(const char func[], uint32_t adr) {
void TWIBus::debug(FSTR_P const func, uint32_t adr) {
if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(adr); }
}
void TWIBus::debug(const char func[], char c) {
void TWIBus::debug(FSTR_P const func, char c) {
if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(c); }
}
void TWIBus::debug(const char func[], char str[]) {
void TWIBus::debug(FSTR_P const func, char str[]) {
if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(str); }
}

23
Marlin/src/feature/twibus.h
Unescape Escape View File

@ -142,7 +142,7 @@ class TWIBus {
*
* @param bytes the number of bytes to request
*/
static void echoprefix(uint8_t bytes, const char prefix[], uint8_t adr);
static void echoprefix(uint8_t bytes, FSTR_P prefix, uint8_t adr);
/**
* @brief Echo data on the bus to serial
@ -151,7 +151,7 @@ class TWIBus {
*
* @param bytes the number of bytes to request
*/
static void echodata(uint8_t bytes, const char prefix[], uint8_t adr);
static void echodata(uint8_t bytes, FSTR_P prefix, uint8_t adr);
/**
* @brief Echo data in the buffer to serial
@ -160,7 +160,7 @@ class TWIBus {
*
* @param bytes the number of bytes to request
*/
void echobuffer(const char prefix[], uint8_t adr);
void echobuffer(FSTR_P prefix, uint8_t adr);
/**
* @brief Request data from the slave device and wait.
@ -237,17 +237,16 @@ class TWIBus {
* @brief Prints a debug message
* @details Prints a simple debug message "TWIBus::function: value"
*/
static void prefix(const char func[]);
static void debug(const char func[], uint32_t adr);
static void debug(const char func[], char c);
static void debug(const char func[], char adr[]);
static inline void debug(const char func[], uint8_t v) { debug(func, (uint32_t)v); }
static void prefix(FSTR_P const func);
static void debug(FSTR_P const func, uint32_t adr);
static void debug(FSTR_P const func, char c);
static void debug(FSTR_P const func, char adr[]);
#else
static inline void debug(const char[], uint32_t) {}
static inline void debug(const char[], char) {}
static inline void debug(const char[], char[]) {}
static inline void debug(const char[], uint8_t) {}
static inline void debug(FSTR_P const, uint32_t) {}
static inline void debug(FSTR_P const, char) {}
static inline void debug(FSTR_P const, char[]) {}
#endif
static inline void debug(FSTR_P const func, uint8_t v) { debug(func, (uint32_t)v); }
};
extern TWIBus i2c;

2
Marlin/src/gcode/bedlevel/M420.cpp
Unescape Escape View File

@ -195,7 +195,7 @@ void GcodeSuite::M420() {
// V to print the matrix or mesh
if (seenV) {
#if ABL_PLANAR
planner.bed_level_matrix.debug(PSTR("Bed Level Correction Matrix:"));
planner.bed_level_matrix.debug(F("Bed Level Correction Matrix:"));
#else
if (leveling_is_valid()) {
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)

30
Marlin/src/gcode/bedlevel/abl/G29.cpp
Unescape Escape View File

@ -783,8 +783,8 @@ G29_TYPE GcodeSuite::G29() {
float min_diff = 999;
auto print_topo_map = [&](PGM_P const title, const bool get_min) {
SERIAL_ECHOPGM_P(title);
auto print_topo_map = [&](FSTR_P const title, const bool get_min) {
SERIAL_ECHOF(title);
for (int8_t yy = abl.grid_points.y - 1; yy >= 0; yy--) {
LOOP_L_N(xx, abl.grid_points.x) {
const int ind = abl.indexIntoAB[xx][yy];
@ -802,19 +802,19 @@ G29_TYPE GcodeSuite::G29() {
SERIAL_EOL();
};
print_topo_map(PSTR("\nBed Height Topography:\n"
" +--- BACK --+\n"
" | |\n"
" L | (+) | R\n"
" E | | I\n"
" F | (-) N (+) | G\n"
" T | | H\n"
" | (-) | T\n"
" | |\n"
" O-- FRONT --+\n"
" (0,0)\n"), true);
print_topo_map(F("\nBed Height Topography:\n"
" +--- BACK --+\n"
" | |\n"
" L | (+) | R\n"
" E | | I\n"
" F | (-) N (+) | G\n"
" T | | H\n"
" | (-) | T\n"
" | |\n"
" O-- FRONT --+\n"
" (0,0)\n"), true);
if (abl.verbose_level > 3)
print_topo_map(PSTR("\nCorrected Bed Height vs. Bed Topology:\n"), false);
print_topo_map(F("\nCorrected Bed Height vs. Bed Topology:\n"), false);
} // abl.topography_map
@ -825,7 +825,7 @@ G29_TYPE GcodeSuite::G29() {
// For LINEAR and 3POINT leveling correct the current position
if (abl.verbose_level > 0)
planner.bed_level_matrix.debug(PSTR("\n\nBed Level Correction Matrix:"));
planner.bed_level_matrix.debug(F("\n\nBed Level Correction Matrix:"));
if (!abl.dryrun) {
//

14
Marlin/src/gcode/calibrate/G28.cpp
Unescape Escape View File

@ -269,28 +269,28 @@ void GcodeSuite::G28() {
#endif
#if HAS_HOMING_CURRENT
auto debug_current = [](PGM_P const s, const int16_t a, const int16_t b) {
DEBUG_ECHOPGM_P(s); DEBUG_ECHOLNPGM(" current: ", a, " -> ", b);
auto debug_current = [](FSTR_P const s, const int16_t a, const int16_t b) {
DEBUG_ECHOF(s); DEBUG_ECHOLNPGM(" current: ", a, " -> ", b);
};
#if HAS_CURRENT_HOME(X)
const int16_t tmc_save_current_X = stepperX.getMilliamps();
stepperX.rms_current(X_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(PSTR("X"), tmc_save_current_X, X_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(F("X"), tmc_save_current_X, X_CURRENT_HOME);
#endif
#if HAS_CURRENT_HOME(X2)
const int16_t tmc_save_current_X2 = stepperX2.getMilliamps();
stepperX2.rms_current(X2_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(PSTR("X2"), tmc_save_current_X2, X2_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(F("X2"), tmc_save_current_X2, X2_CURRENT_HOME);
#endif
#if HAS_CURRENT_HOME(Y)
const int16_t tmc_save_current_Y = stepperY.getMilliamps();
stepperY.rms_current(Y_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(PSTR("Y"), tmc_save_current_Y, Y_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(F("Y"), tmc_save_current_Y, Y_CURRENT_HOME);
#endif
#if HAS_CURRENT_HOME(Y2)
const int16_t tmc_save_current_Y2 = stepperY2.getMilliamps();
stepperY2.rms_current(Y2_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(PSTR("Y2"), tmc_save_current_Y2, Y2_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(F("Y2"), tmc_save_current_Y2, Y2_CURRENT_HOME);
#endif
#if HAS_CURRENT_HOME(I)
const int16_t tmc_save_current_I = stepperI.getMilliamps();
@ -310,7 +310,7 @@ void GcodeSuite::G28() {
#if HAS_CURRENT_HOME(Z) && ENABLED(DELTA)
const int16_t tmc_save_current_Z = stepperZ.getMilliamps();
stepperZ.rms_current(Z_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(PSTR("Z"), tmc_save_current_Z, Z_CURRENT_HOME);
if (DEBUGGING(LEVELING)) debug_current(F("Z"), tmc_save_current_Z, Z_CURRENT_HOME);
#endif
#endif

44
Marlin/src/gcode/calibrate/G33.cpp
Unescape Escape View File

@ -97,10 +97,9 @@ void ac_cleanup(TERN_(HAS_MULTI_HOTEND, const uint8_t old_tool_index)) {
TERN_(HAS_MULTI_HOTEND, tool_change(old_tool_index, true));
}
void print_signed_float(PGM_P const prefix, const_float_t f) {
void print_signed_float(FSTR_P const prefix, const_float_t f) {
SERIAL_ECHOPGM(" ");
SERIAL_ECHOPGM_P(prefix);
SERIAL_CHAR(':');
SERIAL_ECHOF(prefix, AS_CHAR(':'));
if (f >= 0) SERIAL_CHAR('+');
SERIAL_ECHO_F(f, 2);
}
@ -111,24 +110,23 @@ void print_signed_float(PGM_P const prefix, const_float_t f) {
static void print_calibration_settings(const bool end_stops, const bool tower_angles) {
SERIAL_ECHOPGM(".Height:", delta_height);
if (end_stops) {
print_signed_float(PSTR("Ex"), delta_endstop_adj.a);
print_signed_float(PSTR("Ey"), delta_endstop_adj.b);
print_signed_float(PSTR("Ez"), delta_endstop_adj.c);
print_signed_float(F("Ex"), delta_endstop_adj.a);
print_signed_float(F("Ey"), delta_endstop_adj.b);
print_signed_float(F("Ez"), delta_endstop_adj.c);
}
if (end_stops && tower_angles) {
SERIAL_ECHOPGM(" Radius:", delta_radius);
SERIAL_EOL();
SERIAL_ECHOLNPGM(" Radius:", delta_radius);
SERIAL_CHAR('.');
SERIAL_ECHO_SP(13);
}
if (tower_angles) {
print_signed_float(PSTR("Tx"), delta_tower_angle_trim.a);
print_signed_float(PSTR("Ty"), delta_tower_angle_trim.b);
print_signed_float(PSTR("Tz"), delta_tower_angle_trim.c);
print_signed_float(F("Tx"), delta_tower_angle_trim.a);
print_signed_float(F("Ty"), delta_tower_angle_trim.b);
print_signed_float(F("Tz"), delta_tower_angle_trim.c);
}
if ((!end_stops && tower_angles) || (end_stops && !tower_angles)) { // XOR
if (end_stops != tower_angles)
SERIAL_ECHOPGM(" Radius:", delta_radius);
}
SERIAL_EOL();
}
@ -137,11 +135,11 @@ static void print_calibration_settings(const bool end_stops, const bool tower_an
*/
static void print_calibration_results(const float z_pt[NPP + 1], const bool tower_points, const bool opposite_points) {
SERIAL_ECHOPGM(". ");
print_signed_float(PSTR("c"), z_pt[CEN]);
print_signed_float(F("c"), z_pt[CEN]);
if (tower_points) {
print_signed_float(PSTR(" x"), z_pt[__A]);
print_signed_float(PSTR(" y"), z_pt[__B]);
print_signed_float(PSTR(" z"), z_pt[__C]);
print_signed_float(F(" x"), z_pt[__A]);
print_signed_float(F(" y"), z_pt[__B]);
print_signed_float(F(" z"), z_pt[__C]);
}
if (tower_points && opposite_points) {
SERIAL_EOL();
@ -149,9 +147,9 @@ static void print_calibration_results(const float z_pt[NPP + 1], const bool towe
SERIAL_ECHO_SP(13);
}
if (opposite_points) {
print_signed_float(PSTR("yz"), z_pt[_BC]);
print_signed_float(PSTR("zx"), z_pt[_CA]);
print_signed_float(PSTR("xy"), z_pt[_AB]);
print_signed_float(F("yz"), z_pt[_BC]);
print_signed_float(F("zx"), z_pt[_CA]);
print_signed_float(F("xy"), z_pt[_AB]);
}
SERIAL_EOL();
}
@ -653,13 +651,13 @@ void GcodeSuite::G33() {
}
}
else { // dry run
PGM_P const enddryrun = PSTR("End DRY-RUN");
SERIAL_ECHOPGM_P(enddryrun);
FSTR_P const enddryrun = F("End DRY-RUN");
SERIAL_ECHOF(enddryrun);
SERIAL_ECHO_SP(35);
SERIAL_ECHOLNPAIR_F("std dev:", zero_std_dev, 3);
char mess[21];
strcpy_P(mess, enddryrun);
strcpy_P(mess, FTOP(enddryrun));
strcpy_P(&mess[11], PSTR(" sd:"));
if (zero_std_dev < 1)
sprintf_P(&mess[15], PSTR("0.%03i"), (int)LROUND(zero_std_dev * 1000.0f));

14
Marlin/src/gcode/calibrate/M100.cpp
Unescape Escape View File

@ -51,7 +51,7 @@
* Also, there are two support functions that can be called from a developer's C code.
*
* uint16_t check_for_free_memory_corruption(PGM_P const free_memory_start);
* void M100_dump_routine(PGM_P const title, const char * const start, const uintptr_t size);
* void M100_dump_routine(FSTR_P const title, const char * const start, const uintptr_t size);
*
* Initial version by Roxy-3D
*/
@ -182,8 +182,8 @@ inline int32_t count_test_bytes(const char * const start_free_memory) {
}
}
void M100_dump_routine(PGM_P const title, const char * const start, const uintptr_t size) {
SERIAL_ECHOLNPGM_P(title);
void M100_dump_routine(FSTR_P const title, const char * const start, const uintptr_t size) {
SERIAL_ECHOLNF(title);
//
// Round the start and end locations to produce full lines of output
//
@ -196,8 +196,8 @@ inline int32_t count_test_bytes(const char * const start_free_memory) {
#endif // M100_FREE_MEMORY_DUMPER
inline int check_for_free_memory_corruption(PGM_P const title) {
SERIAL_ECHOPGM_P(title);
inline int check_for_free_memory_corruption(FSTR_P const title) {
SERIAL_ECHOF(title);
char *start_free_memory = free_memory_start, *end_free_memory = free_memory_end;
int n = end_free_memory - start_free_memory;
@ -217,7 +217,7 @@ inline int check_for_free_memory_corruption(PGM_P const title) {
// idle();
serial_delay(20);
#if ENABLED(M100_FREE_MEMORY_DUMPER)
M100_dump_routine(PSTR(" Memory corruption detected with end_free_memory<Heap\n"), (const char*)0x1B80, 0x0680);
M100_dump_routine(F(" Memory corruption detected with end_free_memory<Heap\n"), (const char*)0x1B80, 0x0680);
#endif
}
@ -281,7 +281,7 @@ inline void free_memory_pool_report(char * const start_free_memory, const int32_
"\nMemory Corruption detected in free memory area."
"\nLargest free block is ", max_cnt, " bytes at ", hex_address(max_addr)
);
SERIAL_ECHOLNPGM("check_for_free_memory_corruption() = ", check_for_free_memory_corruption(PSTR("M100 F ")));
SERIAL_ECHOLNPGM("check_for_free_memory_corruption() = ", check_for_free_memory_corruption(F("M100 F ")));
}
#if ENABLED(M100_FREE_MEMORY_CORRUPTOR)

6
Marlin/src/gcode/config/M43.cpp
Unescape Escape View File

@ -65,12 +65,12 @@ inline void toggle_pins() {
pin_t pin = GET_PIN_MAP_PIN_M43(i);
if (!VALID_PIN(pin)) continue;
if (M43_NEVER_TOUCH(i) || (!ignore_protection && pin_is_protected(pin))) {
report_pin_state_extended(pin, ignore_protection, true, PSTR("Untouched "));
report_pin_state_extended(pin, ignore_protection, true, F("Untouched "));
SERIAL_EOL();
}
else {
watchdog_refresh();
report_pin_state_extended(pin, ignore_protection, true, PSTR("Pulsing "));
report_pin_state_extended(pin, ignore_protection, true, F("Pulsing "));
#ifdef __STM32F1__
const auto prior_mode = _GET_MODE(i);
#else
@ -303,7 +303,7 @@ void GcodeSuite::M43() {
if (parser.seen('E')) {
endstops.monitor_flag = parser.value_bool();
SERIAL_ECHOPGM("endstop monitor ");
SERIAL_ECHOPGM_P(endstops.monitor_flag ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOF(endstops.monitor_flag ? F("en") : F("dis"));
SERIAL_ECHOLNPGM("abled");
return;
}

10
Marlin/src/gcode/feature/network/M552-M554.cpp
Unescape Escape View File

@ -57,14 +57,14 @@ void MAC_report() {
// Display current values when the link is active,
// otherwise show the stored values
void ip_report(const uint16_t cmd, PGM_P const post, const IPAddress &ipo) {
void ip_report(const uint16_t cmd, FSTR_P const post, const IPAddress &ipo) {
SERIAL_CHAR('M'); SERIAL_ECHO(cmd); SERIAL_CHAR(' ');
LOOP_L_N(i, 4) {
SERIAL_ECHO(ipo[i]);
if (i < 3) SERIAL_CHAR('.');
}
SERIAL_ECHOPGM(" ; ");
SERIAL_ECHOLNPGM_P(post);
SERIAL_ECHOLNF(post);
}
/**
@ -98,7 +98,7 @@ void GcodeSuite::M552() {
}
void GcodeSuite::M552_report() {
ip_report(552, PSTR("ip address"), Ethernet.linkStatus() == LinkON ? Ethernet.localIP() : ethernet.ip);
ip_report(552, F("ip address"), Ethernet.linkStatus() == LinkON ? Ethernet.localIP() : ethernet.ip);
}
/**
@ -112,7 +112,7 @@ void GcodeSuite::M553() {
}
void GcodeSuite::M553_report() {
ip_report(553, PSTR("subnet mask"), Ethernet.linkStatus() == LinkON ? Ethernet.subnetMask() : ethernet.subnet);
ip_report(553, F("subnet mask"), Ethernet.linkStatus() == LinkON ? Ethernet.subnetMask() : ethernet.subnet);
}
/**
@ -126,7 +126,7 @@ void GcodeSuite::M554() {
}
void GcodeSuite::M554_report() {
ip_report(554, PSTR("gateway"), Ethernet.linkStatus() == LinkON ? Ethernet.gatewayIP() : ethernet.gateway);
ip_report(554, F("gateway"), Ethernet.linkStatus() == LinkON ? Ethernet.gatewayIP() : ethernet.gateway);
}
#endif // HAS_ETHERNET

6
Marlin/src/gcode/feature/powerloss/M1000.cpp
Unescape Escape View File

@ -44,10 +44,10 @@
void menu_job_recovery();
inline void plr_error(PGM_P const prefix) {
inline void plr_error(FSTR_P const prefix) {
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
DEBUG_ECHO_START();
DEBUG_ECHOPGM_P(prefix);
DEBUG_ECHOF(prefix);
DEBUG_ECHOLNPGM(" Job Recovery Data");
#else
UNUSED(prefix);
@ -91,7 +91,7 @@ void GcodeSuite::M1000() {
recovery.resume();
}
else
plr_error(recovery.info.valid_head ? PSTR("No") : PSTR("Invalid"));
plr_error(recovery.info.valid_head ? F("No") : F("Invalid"));
}

2
Marlin/src/gcode/feature/powerloss/M413.cpp
Unescape Escape View File

@ -47,7 +47,7 @@ void GcodeSuite::M413() {
if (parser.seen("RL")) recovery.load();
if (parser.seen_test('W')) recovery.save(true);
if (parser.seen_test('P')) recovery.purge();
if (parser.seen_test('D')) recovery.debug(PSTR("M413"));
if (parser.seen_test('D')) recovery.debug(F("M413"));
#if PIN_EXISTS(POWER_LOSS)
if (parser.seen_test('O')) recovery._outage();
#endif

32
Marlin/src/gcode/feature/trinamic/M569.cpp
Unescape Escape View File

@ -141,12 +141,12 @@ void GcodeSuite::M569() {
void GcodeSuite::M569_report(const bool forReplay/*=true*/) {
report_heading(forReplay, F(STR_DRIVER_STEPPING_MODE));
auto say_M569 = [](const bool forReplay, const char * const etc=nullptr, const bool eol=false) {
auto say_M569 = [](const bool forReplay, FSTR_P const etc=nullptr, const bool eol=false) {
if (!forReplay) SERIAL_ECHO_START();
SERIAL_ECHOPGM(" M569 S1");
if (etc) {
SERIAL_CHAR(' ');
SERIAL_ECHOPGM_P(etc);
SERIAL_ECHOF(etc);
}
if (eol) SERIAL_EOL();
};
@ -176,28 +176,28 @@ void GcodeSuite::M569_report(const bool forReplay/*=true*/) {
chop_z2 = TERN0(Z2_HAS_STEALTHCHOP, stepperZ2.get_stored_stealthChop());
if (chop_x2 || chop_y2 || chop_z2) {
say_M569(forReplay, PSTR("I1"));
say_M569(forReplay, F("I1"));
if (chop_x2) SERIAL_ECHOPGM_P(SP_X_STR);
if (chop_y2) SERIAL_ECHOPGM_P(SP_Y_STR);
if (chop_z2) SERIAL_ECHOPGM_P(SP_Z_STR);
SERIAL_EOL();
}
if (TERN0(Z3_HAS_STEALTHCHOP, stepperZ3.get_stored_stealthChop())) { say_M569(forReplay, PSTR("I2 Z"), true); }
if (TERN0(Z4_HAS_STEALTHCHOP, stepperZ4.get_stored_stealthChop())) { say_M569(forReplay, PSTR("I3 Z"), true); }
if (TERN0(Z3_HAS_STEALTHCHOP, stepperZ3.get_stored_stealthChop())) { say_M569(forReplay, F("I2 Z"), true); }
if (TERN0(Z4_HAS_STEALTHCHOP, stepperZ4.get_stored_stealthChop())) { say_M569(forReplay, F("I3 Z"), true); }
if (TERN0( I_HAS_STEALTHCHOP, stepperI.get_stored_stealthChop())) { say_M569(forReplay, SP_I_STR, true); }
if (TERN0( J_HAS_STEALTHCHOP, stepperJ.get_stored_stealthChop())) { say_M569(forReplay, SP_J_STR, true); }
if (TERN0( K_HAS_STEALTHCHOP, stepperK.get_stored_stealthChop())) { say_M569(forReplay, SP_K_STR, true); }
if (TERN0( I_HAS_STEALTHCHOP, stepperI.get_stored_stealthChop())) { say_M569(forReplay, FPSTR(SP_I_STR), true); }
if (TERN0( J_HAS_STEALTHCHOP, stepperJ.get_stored_stealthChop())) { say_M569(forReplay, FPSTR(SP_J_STR), true); }
if (TERN0( K_HAS_STEALTHCHOP, stepperK.get_stored_stealthChop())) { say_M569(forReplay, FPSTR(SP_K_STR), true); }
if (TERN0(E0_HAS_STEALTHCHOP, stepperE0.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T0 E"), true); }
if (TERN0(E1_HAS_STEALTHCHOP, stepperE1.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T1 E"), true); }
if (TERN0(E2_HAS_STEALTHCHOP, stepperE2.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T2 E"), true); }
if (TERN0(E3_HAS_STEALTHCHOP, stepperE3.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T3 E"), true); }
if (TERN0(E4_HAS_STEALTHCHOP, stepperE4.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T4 E"), true); }
if (TERN0(E5_HAS_STEALTHCHOP, stepperE5.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T5 E"), true); }
if (TERN0(E6_HAS_STEALTHCHOP, stepperE6.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T6 E"), true); }
if (TERN0(E7_HAS_STEALTHCHOP, stepperE7.get_stored_stealthChop())) { say_M569(forReplay, PSTR("T7 E"), true); }
if (TERN0(E0_HAS_STEALTHCHOP, stepperE0.get_stored_stealthChop())) { say_M569(forReplay, F("T0 E"), true); }
if (TERN0(E1_HAS_STEALTHCHOP, stepperE1.get_stored_stealthChop())) { say_M569(forReplay, F("T1 E"), true); }
if (TERN0(E2_HAS_STEALTHCHOP, stepperE2.get_stored_stealthChop())) { say_M569(forReplay, F("T2 E"), true); }
if (TERN0(E3_HAS_STEALTHCHOP, stepperE3.get_stored_stealthChop())) { say_M569(forReplay, F("T3 E"), true); }
if (TERN0(E4_HAS_STEALTHCHOP, stepperE4.get_stored_stealthChop())) { say_M569(forReplay, F("T4 E"), true); }
if (TERN0(E5_HAS_STEALTHCHOP, stepperE5.get_stored_stealthChop())) { say_M569(forReplay, F("T5 E"), true); }
if (TERN0(E6_HAS_STEALTHCHOP, stepperE6.get_stored_stealthChop())) { say_M569(forReplay, F("T6 E"), true); }
if (TERN0(E7_HAS_STEALTHCHOP, stepperE7.get_stored_stealthChop())) { say_M569(forReplay, F("T7 E"), true); }
}
#endif // HAS_STEALTHCHOP

4
Marlin/src/gcode/gcode.cpp
Unescape Escape View File

@ -1068,7 +1068,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
}
#if ENABLED(M100_FREE_MEMORY_DUMPER)
void M100_dump_routine(PGM_P const title, const char * const start, const uintptr_t size);
void M100_dump_routine(FSTR_P const title, const char * const start, const uintptr_t size);
#endif
/**
@ -1087,7 +1087,7 @@ void GcodeSuite::process_next_command() {
SERIAL_ECHOLN(command.buffer);
#if ENABLED(M100_FREE_MEMORY_DUMPER)
SERIAL_ECHOPGM("slot:", queue.ring_buffer.index_r);
M100_dump_routine(PSTR(" Command Queue:"), (const char*)&queue.ring_buffer, sizeof(queue.ring_buffer));
M100_dump_routine(F(" Command Queue:"), (const char*)&queue.ring_buffer, sizeof(queue.ring_buffer));
#endif
}

70
Marlin/src/gcode/host/M115.cpp
Unescape Escape View File

@ -34,9 +34,9 @@
#endif
#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
static void cap_line(PGM_P const name, bool ena=false) {
static void cap_line(FSTR_P const name, bool ena=false) {
SERIAL_ECHOPGM("Cap:");
SERIAL_ECHOPGM_P(name);
SERIAL_ECHOF(name);
SERIAL_CHAR(':', '0' + ena);
SERIAL_EOL();
}
@ -68,101 +68,101 @@ void GcodeSuite::M115() {
serial_index_t port = queue.ring_buffer.command_port();
// PAREN_COMMENTS
TERN_(PAREN_COMMENTS, cap_line(PSTR("PAREN_COMMENTS"), true));
TERN_(PAREN_COMMENTS, cap_line(F("PAREN_COMMENTS"), true));
// QUOTED_STRINGS
TERN_(GCODE_QUOTED_STRINGS, cap_line(PSTR("QUOTED_STRINGS"), true));
TERN_(GCODE_QUOTED_STRINGS, cap_line(F("QUOTED_STRINGS"), true));
// SERIAL_XON_XOFF
cap_line(PSTR("SERIAL_XON_XOFF"), ENABLED(SERIAL_XON_XOFF));
cap_line(F("SERIAL_XON_XOFF"), ENABLED(SERIAL_XON_XOFF));
// BINARY_FILE_TRANSFER (M28 B1)
cap_line(PSTR("BINARY_FILE_TRANSFER"), ENABLED(BINARY_FILE_TRANSFER)); // TODO: Use SERIAL_IMPL.has_feature(port, SerialFeature::BinaryFileTransfer) once implemented
cap_line(F("BINARY_FILE_TRANSFER"), ENABLED(BINARY_FILE_TRANSFER)); // TODO: Use SERIAL_IMPL.has_feature(port, SerialFeature::BinaryFileTransfer) once implemented
// EEPROM (M500, M501)
cap_line(PSTR("EEPROM"), ENABLED(EEPROM_SETTINGS));
cap_line(F("EEPROM"), ENABLED(EEPROM_SETTINGS));
// Volumetric Extrusion (M200)
cap_line(PSTR("VOLUMETRIC"), DISABLED(NO_VOLUMETRICS));
cap_line(F("VOLUMETRIC"), DISABLED(NO_VOLUMETRICS));
// AUTOREPORT_POS (M154)
cap_line(PSTR("AUTOREPORT_POS"), ENABLED(AUTO_REPORT_POSITION));
cap_line(F("AUTOREPORT_POS"), ENABLED(AUTO_REPORT_POSITION));
// AUTOREPORT_TEMP (M155)
cap_line(PSTR("AUTOREPORT_TEMP"), ENABLED(AUTO_REPORT_TEMPERATURES));
cap_line(F("AUTOREPORT_TEMP"), ENABLED(AUTO_REPORT_TEMPERATURES));
// PROGRESS (M530 S L, M531 <file>, M532 X L)
cap_line(PSTR("PROGRESS"));
cap_line(F("PROGRESS"));
// Print Job timer M75, M76, M77
cap_line(PSTR("PRINT_JOB"), true);
cap_line(F("PRINT_JOB"), true);
// AUTOLEVEL (G29)
cap_line(PSTR("AUTOLEVEL"), ENABLED(HAS_AUTOLEVEL));
cap_line(F("AUTOLEVEL"), ENABLED(HAS_AUTOLEVEL));
// RUNOUT (M412, M600)
cap_line(PSTR("RUNOUT"), ENABLED(FILAMENT_RUNOUT_SENSOR));
cap_line(F("RUNOUT"), ENABLED(FILAMENT_RUNOUT_SENSOR));
// Z_PROBE (G30)
cap_line(PSTR("Z_PROBE"), ENABLED(HAS_BED_PROBE));
cap_line(F("Z_PROBE"), ENABLED(HAS_BED_PROBE));
// MESH_REPORT (M420 V)
cap_line(PSTR("LEVELING_DATA"), ENABLED(HAS_LEVELING));
cap_line(F("LEVELING_DATA"), ENABLED(HAS_LEVELING));
// BUILD_PERCENT (M73)
cap_line(PSTR("BUILD_PERCENT"), ENABLED(LCD_SET_PROGRESS_MANUALLY));
cap_line(F("BUILD_PERCENT"), ENABLED(LCD_SET_PROGRESS_MANUALLY));
// SOFTWARE_POWER (M80, M81)
cap_line(PSTR("SOFTWARE_POWER"), ENABLED(PSU_CONTROL));
cap_line(F("SOFTWARE_POWER"), ENABLED(PSU_CONTROL));
// TOGGLE_LIGHTS (M355)
cap_line(PSTR("TOGGLE_LIGHTS"), ENABLED(CASE_LIGHT_ENABLE));
cap_line(PSTR("CASE_LIGHT_BRIGHTNESS"), TERN0(CASE_LIGHT_ENABLE, caselight.has_brightness()));
cap_line(F("TOGGLE_LIGHTS"), ENABLED(CASE_LIGHT_ENABLE));
cap_line(F("CASE_LIGHT_BRIGHTNESS"), TERN0(CASE_LIGHT_ENABLE, caselight.has_brightness()));
// EMERGENCY_PARSER (M108, M112, M410, M876)
cap_line(PSTR("EMERGENCY_PARSER"), ENABLED(EMERGENCY_PARSER));
cap_line(F("EMERGENCY_PARSER"), ENABLED(EMERGENCY_PARSER));
// HOST ACTION COMMANDS (paused, resume, resumed, cancel, etc.)
cap_line(PSTR("HOST_ACTION_COMMANDS"), ENABLED(HOST_ACTION_COMMANDS));
cap_line(F("HOST_ACTION_COMMANDS"), ENABLED(HOST_ACTION_COMMANDS));
// PROMPT SUPPORT (M876)
cap_line(PSTR("PROMPT_SUPPORT"), ENABLED(HOST_PROMPT_SUPPORT));
cap_line(F("PROMPT_SUPPORT"), ENABLED(HOST_PROMPT_SUPPORT));
// SDCARD (M20, M23, M24, etc.)
cap_line(PSTR("SDCARD"), ENABLED(SDSUPPORT));
cap_line(F("SDCARD"), ENABLED(SDSUPPORT));
// REPEAT (M808)
cap_line(PSTR("REPEAT"), ENABLED(GCODE_REPEAT_MARKERS));
cap_line(F("REPEAT"), ENABLED(GCODE_REPEAT_MARKERS));
// SD_WRITE (M928, M28, M29)
cap_line(PSTR("SD_WRITE"), ENABLED(SDSUPPORT) && DISABLED(SDCARD_READONLY));
cap_line(F("SD_WRITE"), ENABLED(SDSUPPORT) && DISABLED(SDCARD_READONLY));
// AUTOREPORT_SD_STATUS (M27 extension)
cap_line(PSTR("AUTOREPORT_SD_STATUS"), ENABLED(AUTO_REPORT_SD_STATUS));
cap_line(F("AUTOREPORT_SD_STATUS"), ENABLED(AUTO_REPORT_SD_STATUS));
// LONG_FILENAME_HOST_SUPPORT (M33)
cap_line(PSTR("LONG_FILENAME"), ENABLED(LONG_FILENAME_HOST_SUPPORT));
cap_line(F("LONG_FILENAME"), ENABLED(LONG_FILENAME_HOST_SUPPORT));
// THERMAL_PROTECTION
cap_line(PSTR("THERMAL_PROTECTION"), ENABLED(THERMALLY_SAFE));
cap_line(F("THERMAL_PROTECTION"), ENABLED(THERMALLY_SAFE));
// MOTION_MODES (M80-M89)
cap_line(PSTR("MOTION_MODES"), ENABLED(GCODE_MOTION_MODES));
cap_line(F("MOTION_MODES"), ENABLED(GCODE_MOTION_MODES));
// ARC_SUPPORT (G2-G3)
cap_line(PSTR("ARCS"), ENABLED(ARC_SUPPORT));
cap_line(F("ARCS"), ENABLED(ARC_SUPPORT));
// BABYSTEPPING (M290)
cap_line(PSTR("BABYSTEPPING"), ENABLED(BABYSTEPPING));
cap_line(F("BABYSTEPPING"), ENABLED(BABYSTEPPING));
// CHAMBER_TEMPERATURE (M141, M191)
cap_line(PSTR("CHAMBER_TEMPERATURE"), ENABLED(HAS_HEATED_CHAMBER));
cap_line(F("CHAMBER_TEMPERATURE"), ENABLED(HAS_HEATED_CHAMBER));
// COOLER_TEMPERATURE (M143, M193)
cap_line(PSTR("COOLER_TEMPERATURE"), ENABLED(HAS_COOLER));
cap_line(F("COOLER_TEMPERATURE"), ENABLED(HAS_COOLER));
// MEATPACK Compression
cap_line(PSTR("MEATPACK"), SERIAL_IMPL.has_feature(port, SerialFeature::MeatPack));
cap_line(F("MEATPACK"), SERIAL_IMPL.has_feature(port, SerialFeature::MeatPack));
// Machine Geometry
#if ENABLED(M115_GEOMETRY_REPORT)

62
Marlin/src/gcode/host/M360.cpp
Unescape Escape View File

@ -43,9 +43,15 @@ static void config_line(PGM_P const name, const float val, PGM_P const pref=null
config_prefix(name, pref, ind);
SERIAL_ECHOLN(val);
}
static void config_line(FSTR_P const name, const float val, FSTR_P const pref=nullptr, const int8_t ind=-1) {
config_line(FTOP(name), val, FTOP(pref) , ind);
}
static void config_line_e(const int8_t e, PGM_P const name, const float val) {
config_line(name, val, PSTR("Extr."), e + 1);
}
static void config_line_e(const int8_t e, FSTR_P const name, const float val) {
config_line_e(e, FTOP(name), val);
}
/**
* M360: Report Firmware configuration
@ -60,19 +66,19 @@ void GcodeSuite::M360() {
//
// Basics and Enabled items
//
config_line(PSTR("Baudrate"), BAUDRATE);
config_line(PSTR("InputBuffer"), MAX_CMD_SIZE);
config_line(PSTR("PrintlineCache"), BUFSIZE);
config_line(PSTR("MixingExtruder"), ENABLED(MIXING_EXTRUDER));
config_line(PSTR("SDCard"), ENABLED(SDSUPPORT));
config_line(PSTR("Fan"), ENABLED(HAS_FAN));
config_line(PSTR("LCD"), ENABLED(HAS_DISPLAY));
config_line(PSTR("SoftwarePowerSwitch"), 1);
config_line(PSTR("SupportLocalFilamentchange"), ENABLED(ADVANCED_PAUSE_FEATURE));
config_line(PSTR("CaseLights"), ENABLED(CASE_LIGHT_ENABLE));
config_line(PSTR("ZProbe"), ENABLED(HAS_BED_PROBE));
config_line(PSTR("Autolevel"), ENABLED(HAS_LEVELING));
config_line(PSTR("EEPROM"), ENABLED(EEPROM_SETTINGS));
config_line(F("Baudrate"), BAUDRATE);
config_line(F("InputBuffer"), MAX_CMD_SIZE);
config_line(F("PrintlineCache"), BUFSIZE);
config_line(F("MixingExtruder"), ENABLED(MIXING_EXTRUDER));
config_line(F("SDCard"), ENABLED(SDSUPPORT));
config_line(F("Fan"), ENABLED(HAS_FAN));
config_line(F("LCD"), ENABLED(HAS_DISPLAY));
config_line(F("SoftwarePowerSwitch"), 1);
config_line(F("SupportLocalFilamentchange"), ENABLED(ADVANCED_PAUSE_FEATURE));
config_line(F("CaseLights"), ENABLED(CASE_LIGHT_ENABLE));
config_line(F("ZProbe"), ENABLED(HAS_BED_PROBE));
config_line(F("Autolevel"), ENABLED(HAS_LEVELING));
config_line(F("EEPROM"), ENABLED(EEPROM_SETTINGS));
//
// Homing Directions
@ -87,7 +93,7 @@ void GcodeSuite::M360() {
//
#if HAS_CLASSIC_JERK
if (planner.max_jerk.x == planner.max_jerk.y)
config_line(PSTR("XY"), planner.max_jerk.x, JERK_STR);
config_line(F("XY"), planner.max_jerk.x, JERK_STR);
else {
config_line(X_STR, planner.max_jerk.x, JERK_STR);
config_line(Y_STR, planner.max_jerk.y, JERK_STR);
@ -98,21 +104,21 @@ void GcodeSuite::M360() {
//
// Firmware Retraction
//
config_line(PSTR("SupportG10G11"), ENABLED(FWRETRACT));
config_line(F("SupportG10G11"), ENABLED(FWRETRACT));
#if ENABLED(FWRETRACT)
PGMSTR(RET_STR, "Retraction");
PGMSTR(UNRET_STR, "RetractionUndo");
PGMSTR(SPEED_STR, "Speed");
// M10 Retract with swap (long) moves
config_line(PSTR("Length"), fwretract.settings.retract_length, RET_STR);
config_line(F("Length"), fwretract.settings.retract_length, RET_STR);
config_line(SPEED_STR, fwretract.settings.retract_feedrate_mm_s, RET_STR);
config_line(PSTR("ZLift"), fwretract.settings.retract_zraise, RET_STR);
config_line(PSTR("LongLength"), fwretract.settings.swap_retract_length, RET_STR);
config_line(F("ZLift"), fwretract.settings.retract_zraise, RET_STR);
config_line(F("LongLength"), fwretract.settings.swap_retract_length, RET_STR);
// M11 Recover (undo) with swap (long) moves
config_line(SPEED_STR, fwretract.settings.retract_recover_feedrate_mm_s, UNRET_STR);
config_line(PSTR("ExtraLength"), fwretract.settings.retract_recover_extra, UNRET_STR);
config_line(PSTR("ExtraLongLength"), fwretract.settings.swap_retract_recover_extra, UNRET_STR);
config_line(PSTR("LongSpeed"), fwretract.settings.swap_retract_recover_feedrate_mm_s, UNRET_STR);
config_line(F("ExtraLength"), fwretract.settings.retract_recover_extra, UNRET_STR);
config_line(F("ExtraLongLength"), fwretract.settings.swap_retract_recover_extra, UNRET_STR);
config_line(F("LongSpeed"), fwretract.settings.swap_retract_recover_feedrate_mm_s, UNRET_STR);
#endif
//
@ -163,22 +169,22 @@ void GcodeSuite::M360() {
//
// Heated Bed
//
config_line(PSTR("HeatedBed"), ENABLED(HAS_HEATED_BED));
config_line(F("HeatedBed"), ENABLED(HAS_HEATED_BED));
#if HAS_HEATED_BED
config_line(PSTR("MaxBedTemp"), BED_MAX_TARGET);
config_line(F("MaxBedTemp"), BED_MAX_TARGET);
#endif
//
// Per-Extruder settings
//
config_line(PSTR("NumExtruder"), EXTRUDERS);
config_line(F("NumExtruder"), EXTRUDERS);
#if HAS_EXTRUDERS
LOOP_L_N(e, EXTRUDERS) {
config_line_e(e, JERK_STR, TERN(HAS_LINEAR_E_JERK, planner.max_e_jerk[E_INDEX_N(e)], TERN(HAS_CLASSIC_JERK, planner.max_jerk.e, DEFAULT_EJERK)));
config_line_e(e, PSTR("MaxSpeed"), planner.settings.max_feedrate_mm_s[E_AXIS_N(e)]);
config_line_e(e, PSTR("Acceleration"), planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(e)]);
config_line_e(e, PSTR("Diameter"), TERN(NO_VOLUMETRICS, DEFAULT_NOMINAL_FILAMENT_DIA, planner.filament_size[e]));
config_line_e(e, PSTR("MaxTemp"), thermalManager.hotend_maxtemp[e]);
config_line_e(e, F("MaxSpeed"), planner.settings.max_feedrate_mm_s[E_AXIS_N(e)]);
config_line_e(e, F("Acceleration"), planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(e)]);
config_line_e(e, F("Diameter"), TERN(NO_VOLUMETRICS, DEFAULT_NOMINAL_FILAMENT_DIA, planner.filament_size[e]));
config_line_e(e, F("MaxTemp"), thermalManager.hotend_maxtemp[e]);
}
#endif
}

12
Marlin/src/gcode/queue.cpp
Unescape Escape View File

@ -302,10 +302,10 @@ static bool serial_data_available(serial_index_t index) {
inline int read_serial(const serial_index_t index) { return SERIAL_IMPL.read(index); }
void GCodeQueue::gcode_line_error(PGM_P const err, const serial_index_t serial_ind) {
void GCodeQueue::gcode_line_error(FSTR_P const ferr, const serial_index_t serial_ind) {
PORT_REDIRECT(SERIAL_PORTMASK(serial_ind)); // Reply to the serial port that sent the command
SERIAL_ERROR_START();
SERIAL_ECHOLNPGM_P(err, serial_state[serial_ind.index].last_N);
SERIAL_ECHOLNF(ferr, serial_state[serial_ind.index].last_N);
while (read_serial(serial_ind) != -1) { /* nada */ } // Clear out the RX buffer. Why don't use flush here ?
flush_and_request_resend(serial_ind);
serial_state[serial_ind.index].count = 0;
@ -470,7 +470,7 @@ void GCodeQueue::get_serial_commands() {
if (gcode_N != serial.last_N + 1 && !M110) {
// In case of error on a serial port, don't prevent other serial port from making progress
gcode_line_error(PSTR(STR_ERR_LINE_NO), p);
gcode_line_error(F(STR_ERR_LINE_NO), p);
break;
}
@ -480,13 +480,13 @@ void GCodeQueue::get_serial_commands() {
while (count) checksum ^= command[--count];
if (strtol(apos + 1, nullptr, 10) != checksum) {
// In case of error on a serial port, don't prevent other serial port from making progress
gcode_line_error(PSTR(STR_ERR_CHECKSUM_MISMATCH), p);
gcode_line_error(F(STR_ERR_CHECKSUM_MISMATCH), p);
break;
}
}
else {
// In case of error on a serial port, don't prevent other serial port from making progress
gcode_line_error(PSTR(STR_ERR_NO_CHECKSUM), p);
gcode_line_error(F(STR_ERR_NO_CHECKSUM), p);
break;
}
@ -495,7 +495,7 @@ void GCodeQueue::get_serial_commands() {
#if ENABLED(SDSUPPORT)
// Pronterface "M29" and "M29 " has no line number
else if (card.flag.saving && !is_M29(command)) {
gcode_line_error(PSTR(STR_ERR_NO_CHECKSUM), p);
gcode_line_error(F(STR_ERR_NO_CHECKSUM), p);
break;
}
#endif

2
Marlin/src/gcode/queue.h
Unescape Escape View File

@ -259,7 +259,7 @@ private:
*/
static bool enqueue_one(const char *cmd);
static void gcode_line_error(PGM_P const err, const serial_index_t serial_ind);
static void gcode_line_error(FSTR_P const ferr, const serial_index_t serial_ind);
friend class GcodeSuite;
};

18
Marlin/src/libs/stopwatch.cpp
Unescape Escape View File

@ -34,7 +34,7 @@ millis_t Stopwatch::startTimestamp;
millis_t Stopwatch::stopTimestamp;
bool Stopwatch::stop() {
Stopwatch::debug(PSTR("stop"));
debug(F("stop"));
if (isRunning() || isPaused()) {
TERN_(EXTENSIBLE_UI, ExtUI::onPrintTimerStopped());
@ -46,7 +46,7 @@ bool Stopwatch::stop() {
}
bool Stopwatch::pause() {
Stopwatch::debug(PSTR("pause"));
debug(F("pause"));
if (isRunning()) {
TERN_(EXTENSIBLE_UI, ExtUI::onPrintTimerPaused());
@ -58,7 +58,7 @@ bool Stopwatch::pause() {
}
bool Stopwatch::start() {
Stopwatch::debug(PSTR("start"));
debug(F("start"));
TERN_(EXTENSIBLE_UI, ExtUI::onPrintTimerStarted());
@ -74,14 +74,14 @@ bool Stopwatch::start() {
}
void Stopwatch::resume(const millis_t with_time) {
Stopwatch::debug(PSTR("resume"));
debug(F("resume"));
reset();
if ((accumulator = with_time)) state = RUNNING;
}
void Stopwatch::reset() {
Stopwatch::debug(PSTR("reset"));
debug(F("reset"));
state = STOPPED;
startTimestamp = 0;
@ -95,12 +95,8 @@ millis_t Stopwatch::duration() {
#if ENABLED(DEBUG_STOPWATCH)
void Stopwatch::debug(const char func[]) {
if (DEBUGGING(INFO)) {
SERIAL_ECHOPGM("Stopwatch::");
SERIAL_ECHOPGM_P(func);
SERIAL_ECHOLNPGM("()");
}
void Stopwatch::debug(FSTR_P const func) {
if (DEBUGGING(INFO)) SERIAL_ECHOLNPGM("Stopwatch::", func, "()");
}
#endif

11
Marlin/src/libs/stopwatch.h
Unescape Escape View File

@ -21,14 +21,11 @@
*/
#pragma once
#include "../inc/MarlinConfig.h"
// Print debug messages with M111 S2 (Uses 156 bytes of PROGMEM)
//#define DEBUG_STOPWATCH
#include "../core/macros.h" // for FORCE_INLINE
#include <stdint.h>
typedef uint32_t millis_t;
/**
* @brief Stopwatch class
* @details This class acts as a timer proving stopwatch functionality including
@ -113,11 +110,11 @@ class Stopwatch {
* @brief Print a debug message
* @details Print a simple debug message "Stopwatch::function"
*/
static void debug(const char func[]);
static void debug(FSTR_P const);
#else
static inline void debug(const char[]) {}
static inline void debug(FSTR_P const) {}
#endif
};

24
Marlin/src/libs/vector_3.cpp
Unescape Escape View File

@ -75,8 +75,8 @@ void vector_3::apply_rotation(const matrix_3x3 &matrix) {
matrix.vectors[0].z * _x + matrix.vectors[1].z * _y + matrix.vectors[2].z * _z };
}
void vector_3::debug(PGM_P const title) {
SERIAL_ECHOPGM_P(title);
void vector_3::debug(FSTR_P const title) {
SERIAL_ECHOF(title);
SERIAL_ECHOPAIR_F_P(SP_X_STR, x, 6);
SERIAL_ECHOPAIR_F_P(SP_Y_STR, y, 6);
SERIAL_ECHOLNPAIR_F_P(SP_Z_STR, z, 6);
@ -100,14 +100,14 @@ void matrix_3x3::set_to_identity() {
// Create a matrix from 3 vector_3 inputs
matrix_3x3 matrix_3x3::create_from_rows(const vector_3 &row_0, const vector_3 &row_1, const vector_3 &row_2) {
//row_0.debug(PSTR("row_0"));
//row_1.debug(PSTR("row_1"));
//row_2.debug(PSTR("row_2"));
//row_0.debug(F("row_0"));
//row_1.debug(F("row_1"));
//row_2.debug(F("row_2"));
matrix_3x3 new_matrix;
new_matrix.vectors[0] = row_0;
new_matrix.vectors[1] = row_1;
new_matrix.vectors[2] = row_2;
//new_matrix.debug(PSTR("new_matrix"));
//new_matrix.debug(F("new_matrix"));
return new_matrix;
}
@ -117,14 +117,14 @@ matrix_3x3 matrix_3x3::create_look_at(const vector_3 &target) {
x_row = vector_3(1, 0, -target.x / target.z).get_normal(),
y_row = vector_3::cross(z_row, x_row).get_normal();
// x_row.debug(PSTR("x_row"));
// y_row.debug(PSTR("y_row"));
// z_row.debug(PSTR("z_row"));
// x_row.debug(F("x_row"));
// y_row.debug(F("y_row"));
// z_row.debug(F("z_row"));
// create the matrix already correctly transposed
matrix_3x3 rot = matrix_3x3::create_from_rows(x_row, y_row, z_row);
// rot.debug(PSTR("rot"));
// rot.debug(F("rot"));
return rot;
}
@ -137,8 +137,8 @@ matrix_3x3 matrix_3x3::transpose(const matrix_3x3 &original) {
return new_matrix;
}
void matrix_3x3::debug(PGM_P const title) {
if (title) SERIAL_ECHOLNPGM_P(title);
void matrix_3x3::debug(FSTR_P const title) {
if (title) SERIAL_ECHOLNF(title);
LOOP_L_N(i, 3) {
LOOP_L_N(j, 3) {
if (vectors[i][j] >= 0.0) SERIAL_CHAR('+');

4
Marlin/src/libs/vector_3.h
Unescape Escape View File

@ -78,7 +78,7 @@ struct vector_3 {
operator xy_float_t() { return xy_float_t({ x, y }); }
operator xyz_float_t() { return xyz_float_t({ x, y, z }); }
void debug(PGM_P const title);
void debug(FSTR_P const title);
};
struct matrix_3x3 {
@ -91,7 +91,7 @@ struct matrix_3x3 {
void set_to_identity();
void debug(PGM_P const title);
void debug(FSTR_P const title);
void apply_rotation_xyz(float &x, float &y, float &z);
};

14
Marlin/src/module/endstops.cpp
Unescape Escape View File

@ -483,10 +483,10 @@ void Endstops::event_handler() {
#pragma GCC diagnostic ignored "-Wunused-function"
#endif
static void print_es_state(const bool is_hit, PGM_P const label=nullptr) {
if (label) SERIAL_ECHOPGM_P(label);
static void print_es_state(const bool is_hit, FSTR_P const flabel=nullptr) {
if (flabel) SERIAL_ECHOF(flabel);
SERIAL_ECHOPGM(": ");
SERIAL_ECHOLNPGM_P(is_hit ? PSTR(STR_ENDSTOP_HIT) : PSTR(STR_ENDSTOP_OPEN));
SERIAL_ECHOLNF(is_hit ? F(STR_ENDSTOP_HIT) : F(STR_ENDSTOP_OPEN));
}
#if GCC_VERSION <= 50000
@ -496,7 +496,7 @@ static void print_es_state(const bool is_hit, PGM_P const label=nullptr) {
void _O2 Endstops::report_states() {
TERN_(BLTOUCH, bltouch._set_SW_mode());
SERIAL_ECHOLNPGM(STR_M119_REPORT);
#define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(STR_##S))
#define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, F(STR_##S))
#if HAS_X_MIN
ES_REPORT(X_MIN);
#endif
@ -564,10 +564,10 @@ void _O2 Endstops::report_states() {
ES_REPORT(K_MAX);
#endif
#if BOTH(MARLIN_DEV_MODE, PROBE_ACTIVATION_SWITCH)
print_es_state(probe_switch_activated(), PSTR(STR_PROBE_EN));
print_es_state(probe_switch_activated(), F(STR_PROBE_EN));
#endif
#if USES_Z_MIN_PROBE_PIN
print_es_state(PROBE_TRIGGERED(), PSTR(STR_Z_PROBE));
print_es_state(PROBE_TRIGGERED(), F(STR_Z_PROBE));
#endif
#if MULTI_FILAMENT_SENSOR
#define _CASE_RUNOUT(N) case N: pin = FIL_RUNOUT##N##_PIN; state = FIL_RUNOUT##N##_STATE; break;
@ -584,7 +584,7 @@ void _O2 Endstops::report_states() {
}
#undef _CASE_RUNOUT
#elif HAS_FILAMENT_SENSOR
print_es_state(READ(FIL_RUNOUT1_PIN) != FIL_RUNOUT1_STATE, PSTR(STR_FILAMENT));
print_es_state(READ(FIL_RUNOUT1_PIN) != FIL_RUNOUT1_STATE, F(STR_FILAMENT));
#endif
TERN_(BLTOUCH, bltouch._reset_SW_mode());

8
Marlin/src/pins/pinsDebug.h
Unescape Escape View File

@ -178,7 +178,7 @@ static void print_input_or_output(const bool isout) {
}
// pretty report with PWM info
inline void report_pin_state_extended(pin_t pin, const bool ignore, const bool extended=false, PGM_P const start_string=nullptr) {
inline void report_pin_state_extended(pin_t pin, const bool ignore, const bool extended=false, FSTR_P const start_string=nullptr) {
char buffer[MAX_NAME_LENGTH + 1]; // for the sprintf statements
bool found = false, multi_name_pin = false;
@ -202,7 +202,7 @@ inline void report_pin_state_extended(pin_t pin, const bool ignore, const bool e
LOOP_L_N(x, COUNT(pin_array)) { // scan entire array and report all instances of this pin
if (GET_ARRAY_PIN(x) == pin) {
if (!found) { // report digital and analog pin number only on the first time through
if (start_string) SERIAL_ECHOPGM_P(start_string);
if (start_string) SERIAL_ECHOF(start_string);
SERIAL_ECHOPGM("PIN: ");
PRINT_PIN(pin);
PRINT_PORT(pin);
@ -211,7 +211,7 @@ inline void report_pin_state_extended(pin_t pin, const bool ignore, const bool e
}
else {
SERIAL_CHAR('.');
SERIAL_ECHO_SP(MULTI_NAME_PAD + (start_string ? strlen_P(start_string) : 0)); // add padding if not the first instance found
SERIAL_ECHO_SP(MULTI_NAME_PAD + (start_string ? strlen_P(FTOP(start_string)) : 0)); // add padding if not the first instance found
}
PRINT_ARRAY_NAME(x);
if (extended) {
@ -250,7 +250,7 @@ inline void report_pin_state_extended(pin_t pin, const bool ignore, const bool e
} // end of for loop
if (!found) {
if (start_string) SERIAL_ECHOPGM_P(start_string);
if (start_string) SERIAL_ECHOF(start_string);
SERIAL_ECHOPGM("PIN: ");
PRINT_PIN(pin);
PRINT_PORT(pin);

Write Preview
Loading…
Cancel
Save