From 0eca236dcdc68eef6e5f4d6a080da5dc4bdace28 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 24 Jan 2019 00:57:26 -0600 Subject: [PATCH] Fix L6470 config comments --- Marlin/Configuration_adv.h | 30 +++++++++---------- Marlin/src/config/default/Configuration_adv.h | 30 +++++++++---------- .../3DFabXYZ/Migbot/Configuration_adv.h | 30 +++++++++---------- .../AlephObjects/TAZ4/Configuration_adv.h | 30 +++++++++---------- .../examples/Anet/A2/Configuration_adv.h | 30 +++++++++---------- .../examples/Anet/A2plus/Configuration_adv.h | 30 +++++++++---------- .../examples/Anet/A6/Configuration_adv.h | 30 +++++++++---------- .../examples/Anet/A8/Configuration_adv.h | 30 +++++++++---------- .../config/examples/ArmEd/Configuration_adv.h | 30 +++++++++---------- .../BIBO/TouchX/cyclops/Configuration_adv.h | 30 +++++++++---------- .../BIBO/TouchX/default/Configuration_adv.h | 30 +++++++++---------- .../examples/BQ/Hephestos/Configuration_adv.h | 30 +++++++++---------- .../BQ/Hephestos_2/Configuration_adv.h | 30 +++++++++---------- .../examples/BQ/WITBOX/Configuration_adv.h | 30 +++++++++---------- .../examples/Cartesio/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-10/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-10S/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-10mini/Configuration_adv.h | 30 +++++++++---------- .../Creality/CR-8/Configuration_adv.h | 30 +++++++++---------- .../Creality/Ender-2/Configuration_adv.h | 30 +++++++++---------- .../Creality/Ender-3/Configuration_adv.h | 30 +++++++++---------- .../Creality/Ender-4/Configuration_adv.h | 30 +++++++++---------- .../examples/Einstart-S/Configuration_adv.h | 30 +++++++++---------- .../config/examples/Felix/Configuration_adv.h | 30 +++++++++---------- .../FlashForge/CreatorPro/Configuration_adv.h | 30 +++++++++---------- .../FolgerTech/i3-2020/Configuration_adv.h | 30 +++++++++---------- .../Formbot/Raptor/Configuration_adv.h | 30 +++++++++---------- .../Formbot/T_Rex_2+/Configuration_adv.h | 30 +++++++++---------- .../Formbot/T_Rex_3/Configuration_adv.h | 30 +++++++++---------- .../Geeetech/MeCreator2/Configuration_adv.h | 30 +++++++++---------- .../Prusa i3 Pro C/Configuration_adv.h | 30 +++++++++---------- .../Prusa i3 Pro W/Configuration_adv.h | 30 +++++++++---------- .../Infitary/i3-M508/Configuration_adv.h | 30 +++++++++---------- .../examples/JGAurora/A5/Configuration_adv.h | 30 +++++++++---------- .../examples/MakerParts/Configuration_adv.h | 30 +++++++++---------- .../examples/Malyan/M150/Configuration_adv.h | 30 +++++++++---------- .../examples/Malyan/M200/Configuration_adv.h | 30 +++++++++---------- .../Micromake/C1/enhanced/Configuration_adv.h | 30 +++++++++---------- .../examples/Mks/Robin/Configuration_adv.h | 30 +++++++++---------- .../examples/Mks/Sbase/Configuration_adv.h | 30 +++++++++---------- .../RapideLite/RL200/Configuration_adv.h | 30 +++++++++---------- .../examples/RigidBot/Configuration_adv.h | 30 +++++++++---------- .../config/examples/SCARA/Configuration_adv.h | 30 +++++++++---------- .../examples/Sanguinololu/Configuration_adv.h | 30 +++++++++---------- .../examples/TheBorg/Configuration_adv.h | 30 +++++++++---------- .../examples/TinyBoy2/Configuration_adv.h | 30 +++++++++---------- .../examples/Tronxy/X3A/Configuration_adv.h | 30 +++++++++---------- .../UltiMachine/Archim1/Configuration_adv.h | 30 +++++++++---------- .../UltiMachine/Archim2/Configuration_adv.h | 30 +++++++++---------- .../examples/VORONDesign/Configuration_adv.h | 30 +++++++++---------- .../Velleman/K8200/Configuration_adv.h | 30 +++++++++---------- .../Velleman/K8400/Configuration_adv.h | 30 +++++++++---------- .../WASP/PowerWASP/Configuration_adv.h | 30 +++++++++---------- .../Wanhao/Duplicator 6/Configuration_adv.h | 30 +++++++++---------- .../delta/Anycubic/Kossel/Configuration_adv.h | 30 +++++++++---------- .../FLSUN/auto_calibrate/Configuration_adv.h | 30 +++++++++---------- .../delta/FLSUN/kossel/Configuration_adv.h | 30 +++++++++---------- .../FLSUN/kossel_mini/Configuration_adv.h | 30 +++++++++---------- .../Geeetech/Rostock 301/Configuration_adv.h | 30 +++++++++---------- .../delta/MKS/SBASE/Configuration_adv.h | 30 +++++++++---------- .../Tevo Little Monster/Configuration_adv.h | 30 +++++++++---------- .../delta/generic/Configuration_adv.h | 30 +++++++++---------- .../delta/kossel_mini/Configuration_adv.h | 30 +++++++++---------- .../delta/kossel_xl/Configuration_adv.h | 30 +++++++++---------- .../gCreate/gMax1.5+/Configuration_adv.h | 30 +++++++++---------- .../examples/makibox/Configuration_adv.h | 30 +++++++++---------- .../tvrrug/Round2/Configuration_adv.h | 30 +++++++++---------- .../config/examples/wt150/Configuration_adv.h | 30 +++++++++---------- 68 files changed, 1020 insertions(+), 1020 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index ed11466811..b1f29938a0 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index ed11466811..b1f29938a0 100755 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index c94d465867..229e13c0cc 100644 --- a/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index c36a5d2864..2623f85054 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h index d383eb1349..bcf8da7845 100644 --- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h index d383eb1349..bcf8da7845 100644 --- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index 8db87019e2..748d9acac9 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -1599,21 +1599,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 74bdf35e24..e4008ebc06 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/ArmEd/Configuration_adv.h b/Marlin/src/config/examples/ArmEd/Configuration_adv.h index 40faaa4b2d..a19a43204b 100644 --- a/Marlin/src/config/examples/ArmEd/Configuration_adv.h +++ b/Marlin/src/config/examples/ArmEd/Configuration_adv.h @@ -1605,21 +1605,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index b0c0eec415..b27ecdb72c 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1599,21 +1599,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h index 6ccce86b68..ff9dd53d85 100644 --- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index a771c69df9..01965484cb 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index 4525324f5c..8ea0c87d5c 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1608,21 +1608,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index a771c69df9..01965484cb 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index b0326bd213..552b1d4ac9 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index 2a28290c9b..fa1920fec3 100755 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h index 27f9107e1b..7c0539b55b 100644 --- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h index ac710686a7..667383c72a 100644 --- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h index c4368a8083..f038befcae 100644 --- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h index 612dbf111c..c041e9c282 100644 --- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h index 30cb4a6f9a..bd77f85bb4 100644 --- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h index 1c613a1747..555f8d019b 100644 --- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h index 7ff7ef6a71..7e644dfd10 100644 --- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h +++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index 82687ebef7..1927686f33 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 82f1ba2b59..504791e96f 100644 --- a/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1599,21 +1599,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index ce619c7a98..7e3bce205f 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h index e923f40853..7cd43cc4a5 100644 --- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index df89649e04..dade09bd90 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1605,21 +1605,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h index d49d74e7c3..a16fd82f3d 100644 --- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1605,21 +1605,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 49fd426e83..8a433f593a 100644 --- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 8c77f69e77..a061e516c0 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 8c77f69e77..a061e516c0 100644 --- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 4e02acc801..6c0c4e78ac 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h index 6dc754193c..e7591c85c4 100644 --- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h +++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h index ea95224d49..f19f8142d1 100644 --- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h +++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index 4b52884738..d250959304 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h index fa2a9e8ba4..d9e97efabe 100644 --- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 091666a92e..3fee7f626e 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h index 30b8a66fa5..963f4fcc5d 100644 --- a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index cdcebda722..c20ff10264 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -1608,21 +1608,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h b/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h index b1a162450c..77e0b34122 100644 --- a/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/Marlin/src/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index 9f032c7302..54e960e7a3 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index 0660a79788..081ea708ab 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index fcad89b2b9..961b489d71 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h index 66d947e854..64c35a225f 100644 --- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h +++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 029c04fb6a..edcb10d0d9 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h index ee093cd6c3..bcc798b7ba 100644 --- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h index 35d47d75f5..1959670e49 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index c06c771791..fac4d2429d 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h index 7f6abd1d80..cf3ffff6bf 100644 --- a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h +++ b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 5cb29ea7f3..c1d802a8ba 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -1613,21 +1613,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index c8c198afd4..f11156670a 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h b/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h index 11f7da59d8..6459b2d36f 100644 --- a/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index e68a2487c0..13581d590c 100644 --- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index f008f76d70..66da196df6 100644 --- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 14bcdbe8d8..f3eb98c7d5 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 14bcdbe8d8..f3eb98c7d5 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 079cacee47..f8b7205bac 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 41a997915a..e3746fc526 100644 --- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1603,21 +1603,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h index 4c52e4c88a..a1d5907080 100644 --- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 24de010da3..9463059719 100644 --- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index 079cacee47..f8b7205bac 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index 079cacee47..f8b7205bac 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 9739ab8a2c..bfdb427370 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1602,21 +1602,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index e27d90d375..7ac8a7b3e0 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index e204b8220d..67302b23f9 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index d63dd2c4f4..2aea7d87df 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1600,21 +1600,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS) diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index 785b5ffdc5..b70e786e71 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -1601,21 +1601,21 @@ /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ + * Monitor L6470 drivers for error conditions like over temperature and over current. + * In the case of over temperature Marlin can decrease the drive until the error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. + * I not present or I0 or I1 - X, Y, Z or E0 + * I2 - X2, Y2, Z2 or E1 + * I3 - Z3 or E3 + * I4 - E4 + * I5 - E5 + * M916 - Increase drive level until get thermal warning + * M917 - Find minimum current thresholds + * M918 - Increase speed until max or error + * M122 S0/1 - Report driver parameters + */ //#define MONITOR_L6470_DRIVER_STATUS #if ENABLED(MONITOR_L6470_DRIVER_STATUS)