melch/Marlin
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Add 4th extruder

Browse Source
This commit is contained in:
MagoKimbra 2015-01-23 23:13:06 +01:00
parent 54d5b52a2e
commit 0ebf896070
16 changed files with 614 additions and 219 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
Marlin/Configuration.h
View File

@ -44,7 +44,7 @@
// The following define selects which electronics board you have. // The following define selects which electronics board you have.
// Please choose the name from boards.h that matches your setup // Please choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD #ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_ULTIMAKER #define MOTHERBOARD BOARD_AZTEEG_X3_PRO
#endif #endif
// Define this to set a custom name for your generic Mendel, // Define this to set a custom name for your generic Mendel,
@ -104,9 +104,10 @@
// 147 is Pt100 with 4k7 pullup // 147 is Pt100 with 4k7 pullup
// 110 is Pt100 with 1k pullup (non standard) // 110 is Pt100 with 1k pullup (non standard)
#define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 -1 #define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0 #define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
// This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted.
@ -121,20 +122,22 @@
// The minimal temperature defines the temperature below which the heater will not be enabled It is used // The minimal temperature defines the temperature below which the heater will not be enabled It is used
// to check that the wiring to the thermistor is not broken. // to check that the wiring to the thermistor is not broken.
// Otherwise this would lead to the heater being powered on all the time. // Otherwise this would lead to the heater being powered on all the time.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5 // degC
#define HEATER_1_MINTEMP 5 #define HEATER_1_MINTEMP 5 // degC
#define HEATER_2_MINTEMP 5 #define HEATER_2_MINTEMP 5 // degC
#define BED_MINTEMP 5 #define HEATER_3_MINTEMP 5 // degC
#define BED_MINTEMP 5 // degC
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! // This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection. // You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 275 // degC
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275 // degC
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 // degC
#define BED_MAXTEMP 150 #define HEATER_3_MAXTEMP 275 // degC
#define BED_MAXTEMP 150 // degC
// If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the // If your bed has low resistance e.g. 0.6 ohm and throws the fuse you can duty cycle it to reduce the
// average current. The value should be an integer and the heat bed will be turned on for 1 interval of // average current. The value should be an integer and the heat bed will be turned on for 1 interval of
// HEATER_BED_DUTY_CYCLE_DIVIDER intervals. // HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
//#define HEATER_BED_DUTY_CYCLE_DIVIDER 4 //#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
@ -221,7 +224,7 @@
//if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately. //if PREVENT_DANGEROUS_EXTRUDE is on, you can still disable (uncomment) very long bits of extrusion separately.
#define PREVENT_LENGTHY_EXTRUDE #define PREVENT_LENGTHY_EXTRUDE
#define EXTRUDE_MINTEMP 170 #define EXTRUDE_MINTEMP 170 // degC
#define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances. #define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
/*================== Thermal Runaway Protection ============================== /*================== Thermal Runaway Protection ==============================
@ -325,6 +328,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
#define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
// ENDSTOP SETTINGS: // ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN

38
Marlin/ConfigurationStore.cpp
View File

@ -77,7 +77,7 @@ void Config_StoreSettings()
EEPROM_WRITE_VAR(i,zprobe_zoffset); EEPROM_WRITE_VAR(i,zprobe_zoffset);
#ifdef PIDTEMP #ifdef PIDTEMP
float dummy = 0.0f; float dummy = 0.0f;
for (int e = 0; e < 3; e++) for (int e = 0; e < 4; e++)
{ {
if (e < EXTRUDERS) if (e < EXTRUDERS)
{ {
@ -132,12 +132,15 @@ void Config_StoreSettings()
// Save filament sizes // Save filament sizes
EEPROM_WRITE_VAR(i, volumetric_enabled); EEPROM_WRITE_VAR(i, volumetric_enabled);
EEPROM_WRITE_VAR(i, filament_size[0]); EEPROM_WRITE_VAR(i, filament_size[0]);
#if EXTRUDERS > 1 #if EXTRUDERS > 1
EEPROM_WRITE_VAR(i, filament_size[1]); EEPROM_WRITE_VAR(i, filament_size[1]);
#if EXTRUDERS > 2 #if EXTRUDERS > 2
EEPROM_WRITE_VAR(i, filament_size[2]); EEPROM_WRITE_VAR(i, filament_size[2]);
#endif//EXTRUDERS > 2 #if EXTRUDERS > 3
#endif//EXTRUDERS > 1 EEPROM_WRITE_VAR(i, filament_size[3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
char ver2[4]=EEPROM_VERSION; char ver2[4]=EEPROM_VERSION;
i=EEPROM_OFFSET; i=EEPROM_OFFSET;
@ -280,8 +283,13 @@ SERIAL_ECHOLNPGM("Scaling factors:");
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]); SERIAL_ECHOPAIR(" M200 T2 D", filament_size[2]);
SERIAL_ECHOLN(""); SERIAL_ECHOLN("");
#endif//EXTRUDERS > 2 #if EXTRUDERS > 3
#endif//EXTRUDERS > 1 SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" M200 T3 D", filament_size[3]);
SERIAL_ECHOLN("");
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
} else { } else {
SERIAL_ECHOLNPGM("Filament settings: Disabled"); SERIAL_ECHOLNPGM("Filament settings: Disabled");
} }
@ -336,7 +344,7 @@ void Config_RetrieveSettings()
EEPROM_READ_VAR(i,zprobe_zoffset); EEPROM_READ_VAR(i,zprobe_zoffset);
#ifdef PIDTEMP #ifdef PIDTEMP
float dummy = 0.0f; float dummy = 0.0f;
for (int e = 0; e < 3; e++) // 3 = max extruders supported by marlin for (int e = 0; e < 4; e++) // 4 = max extruders supported by marlin
{ {
if (e < EXTRUDERS) if (e < EXTRUDERS)
{ {
@ -403,8 +411,11 @@ void Config_RetrieveSettings()
EEPROM_READ_VAR(i, filament_size[1]); EEPROM_READ_VAR(i, filament_size[1]);
#if EXTRUDERS > 2 #if EXTRUDERS > 2
EEPROM_READ_VAR(i, filament_size[2]); EEPROM_READ_VAR(i, filament_size[2]);
#endif//EXTRUDERS > 2 #if EXTRUDERS > 3
#endif//EXTRUDERS > 1 EEPROM_READ_VAR(i, filament_size[3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
calculate_volumetric_multipliers(); calculate_volumetric_multipliers();
// Call updatePID (similar to when we have processed M301) // Call updatePID (similar to when we have processed M301)
updatePID(); updatePID();
@ -508,8 +519,11 @@ void Config_ResetDefault()
filament_size[1] = DEFAULT_NOMINAL_FILAMENT_DIA; filament_size[1] = DEFAULT_NOMINAL_FILAMENT_DIA;
#if EXTRUDERS > 2 #if EXTRUDERS > 2
filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA; filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA;
#endif//EXTRUDERS > 2 #if EXTRUDERS > 3
#endif//EXTRUDERS > 1 filament_size[3] = DEFAULT_NOMINAL_FILAMENT_DIA;
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
calculate_volumetric_multipliers(); calculate_volumetric_multipliers();
SERIAL_ECHO_START; SERIAL_ECHO_START;

12
Marlin/Configuration_adv.h
View File

@ -78,6 +78,7 @@
#define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_0_AUTO_FAN_PIN -1
#define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1
#define EXTRUDER_2_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1
#define EXTRUDER_3_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
@ -486,6 +487,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#define THERMISTORHEATER_2 TEMP_SENSOR_2 #define THERMISTORHEATER_2 TEMP_SENSOR_2
#define HEATER_2_USES_THERMISTOR #define HEATER_2_USES_THERMISTOR
#endif #endif
#if TEMP_SENSOR_3 > 0
#define THERMISTORHEATER_3 TEMP_SENSOR_3
#define HEATER_3_USES_THERMISTOR
#endif
#if TEMP_SENSOR_BED > 0 #if TEMP_SENSOR_BED > 0
#define THERMISTORBED TEMP_SENSOR_BED #define THERMISTORBED TEMP_SENSOR_BED
#define BED_USES_THERMISTOR #define BED_USES_THERMISTOR
@ -499,6 +504,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#if TEMP_SENSOR_2 == -1 #if TEMP_SENSOR_2 == -1
#define HEATER_2_USES_AD595 #define HEATER_2_USES_AD595
#endif #endif
#if TEMP_SENSOR_3 == -1
#define HEATER_3_USES_AD595
#endif
#if TEMP_SENSOR_BED == -1 #if TEMP_SENSOR_BED == -1
#define BED_USES_AD595 #define BED_USES_AD595
#endif #endif
@ -517,6 +525,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#undef HEATER_2_MINTEMP #undef HEATER_2_MINTEMP
#undef HEATER_2_MAXTEMP #undef HEATER_2_MAXTEMP
#endif #endif
#if TEMP_SENSOR_3 == 0
#undef HEATER_3_MINTEMP
#undef HEATER_3_MAXTEMP
#endif
#if TEMP_SENSOR_BED == 0 #if TEMP_SENSOR_BED == 0
#undef BED_MINTEMP #undef BED_MINTEMP
#undef BED_MAXTEMP #undef BED_MAXTEMP

7
Marlin/Marlin.h
View File

@ -170,6 +170,13 @@ void manage_inactivity(bool ignore_stepper_queue=false);
#define disable_e2() /* nothing */ #define disable_e2() /* nothing */
#endif #endif
#if (EXTRUDERS > 3) && defined(E3_ENABLE_PIN) && (E3_ENABLE_PIN > -1)
#define enable_e3() WRITE(E3_ENABLE_PIN, E_ENABLE_ON)
#define disable_e3() WRITE(E3_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e3() /* nothing */
#define disable_e3() /* nothing */
#endif
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5}; enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};

61
Marlin/Marlin_main.cpp
View File

@ -212,6 +212,9 @@ int extruder_multiply[EXTRUDERS] = {100
, 100 , 100
#if EXTRUDERS > 2 #if EXTRUDERS > 2
, 100 , 100
#if EXTRUDERS > 3
, 100
#endif
#endif #endif
#endif #endif
}; };
@ -221,6 +224,9 @@ float filament_size[EXTRUDERS] = { DEFAULT_NOMINAL_FILAMENT_DIA
, DEFAULT_NOMINAL_FILAMENT_DIA , DEFAULT_NOMINAL_FILAMENT_DIA
#if EXTRUDERS > 2 #if EXTRUDERS > 2
, DEFAULT_NOMINAL_FILAMENT_DIA , DEFAULT_NOMINAL_FILAMENT_DIA
#if EXTRUDERS > 3
, DEFAULT_NOMINAL_FILAMENT_DIA
#endif
#endif #endif
#endif #endif
}; };
@ -229,6 +235,9 @@ float volumetric_multiplier[EXTRUDERS] = {1.0
, 1.0 , 1.0
#if EXTRUDERS > 2 #if EXTRUDERS > 2
, 1.0 , 1.0
#if EXTRUDERS > 3
, 1.0
#endif
#endif #endif
#endif #endif
}; };
@ -274,6 +283,9 @@ int EtoPPressure=0;
, false , false
#if EXTRUDERS > 2 #if EXTRUDERS > 2
, false , false
#if EXTRUDERS > 3
, false
#endif
#endif #endif
#endif #endif
}; };
@ -282,6 +294,9 @@ int EtoPPressure=0;
, false , false
#if EXTRUDERS > 2 #if EXTRUDERS > 2
, false , false
#if EXTRUDERS > 3
, false
#endif
#endif #endif
#endif #endif
}; };
@ -293,7 +308,7 @@ int EtoPPressure=0;
float retract_recover_length = RETRACT_RECOVER_LENGTH; float retract_recover_length = RETRACT_RECOVER_LENGTH;
float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP; float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
float retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE; float retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE;
#endif #endif // FWRETRACT
#ifdef ULTIPANEL #ifdef ULTIPANEL
#ifdef PS_DEFAULT_OFF #ifdef PS_DEFAULT_OFF
@ -582,8 +597,8 @@ void setup()
SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR); SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
SERIAL_ECHOPGM("Compiled: "); SERIAL_ECHOPGM("Compiled: ");
SERIAL_ECHOLNPGM(__DATE__); SERIAL_ECHOLNPGM(__DATE__);
#endif #endif // STRING_CONFIG_H_AUTHOR
#endif #endif // STRING_VERSION_CONFIG_H
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_FREE_MEMORY); SERIAL_ECHOPGM(MSG_FREE_MEMORY);
SERIAL_ECHO(freeMemory()); SERIAL_ECHO(freeMemory());
@ -2891,12 +2906,15 @@ Sigma_Exit:
filament_size[tmp_extruder] = (float)code_value(); filament_size[tmp_extruder] = (float)code_value();
// make sure all extruders have some sane value for the filament size // make sure all extruders have some sane value for the filament size
filament_size[0] = (filament_size[0] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[0]); filament_size[0] = (filament_size[0] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[0]);
#if EXTRUDERS > 1 #if EXTRUDERS > 1
filament_size[1] = (filament_size[1] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[1]); filament_size[1] = (filament_size[1] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[1]);
#if EXTRUDERS > 2 #if EXTRUDERS > 2
filament_size[2] = (filament_size[2] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[2]); filament_size[2] = (filament_size[2] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[2]);
#endif #if EXTRUDERS > 3
#endif filament_size[3] = (filament_size[3] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
volumetric_enabled = true; volumetric_enabled = true;
} }
} else { } else {
@ -3020,23 +3038,29 @@ Sigma_Exit:
{ {
autoretract_enabled=false; autoretract_enabled=false;
retracted[0]=false; retracted[0]=false;
#if EXTRUDERS > 1 #if EXTRUDERS > 1
retracted[1]=false; retracted[1]=false;
#endif #endif
#if EXTRUDERS > 2 #if EXTRUDERS > 2
retracted[2]=false; retracted[2]=false;
#endif #endif
#if EXTRUDERS > 3
retracted[3]=false;
#endif
}break; }break;
case 1: case 1:
{ {
autoretract_enabled=true; autoretract_enabled=true;
retracted[0]=false; retracted[0]=false;
#if EXTRUDERS > 1 #if EXTRUDERS > 1
retracted[1]=false; retracted[1]=false;
#endif #endif
#if EXTRUDERS > 2 #if EXTRUDERS > 2
retracted[2]=false; retracted[2]=false;
#endif #endif
#if EXTRUDERS > 3
retracted[3]=false;
#endif
}break; }break;
default: default:
SERIAL_ECHO_START; SERIAL_ECHO_START;
@ -4680,7 +4704,10 @@ void calculate_volumetric_multipliers() {
volumetric_multiplier[1] = calculate_volumetric_multiplier(filament_size[1]); volumetric_multiplier[1] = calculate_volumetric_multiplier(filament_size[1]);
#if EXTRUDERS > 2 #if EXTRUDERS > 2
volumetric_multiplier[2] = calculate_volumetric_multiplier(filament_size[2]); volumetric_multiplier[2] = calculate_volumetric_multiplier(filament_size[2]);
#endif #if EXTRUDERS > 3
#endif volumetric_multiplier[3] = calculate_volumetric_multiplier(filament_size[3]);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
} }

14
Marlin/language_en.h
View File

@ -21,14 +21,16 @@
#define MSG_PREHEAT_PLA0 "Preheat PLA 1" #define MSG_PREHEAT_PLA0 "Preheat PLA 1"
#define MSG_PREHEAT_PLA1 "Preheat PLA 2" #define MSG_PREHEAT_PLA1 "Preheat PLA 2"
#define MSG_PREHEAT_PLA2 "Preheat PLA 3" #define MSG_PREHEAT_PLA2 "Preheat PLA 3"
#define MSG_PREHEAT_PLA012 "Preheat PLA All" #define MSG_PREHEAT_PLA3 "Preheat PLA 4"
#define MSG_PREHEAT_PLA0123 "Preheat PLA All"
#define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed" #define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed"
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf" #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf"
#define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_PREHEAT_ABS "Preheat ABS"
#define MSG_PREHEAT_ABS0 "Preheat ABS 1" #define MSG_PREHEAT_ABS0 "Preheat ABS 1"
#define MSG_PREHEAT_ABS1 "Preheat ABS 2" #define MSG_PREHEAT_ABS1 "Preheat ABS 2"
#define MSG_PREHEAT_ABS2 "Preheat ABS 3" #define MSG_PREHEAT_ABS2 "Preheat ABS 3"
#define MSG_PREHEAT_ABS012 "Preheat ABS All" #define MSG_PREHEAT_ABS3 "Preheat ABS 4"
#define MSG_PREHEAT_ABS0123 "Preheat ABS All"
#define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed" #define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed"
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf" #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf"
#define MSG_COOLDOWN "Cooldown" #define MSG_COOLDOWN "Cooldown"
@ -43,6 +45,7 @@
#define MSG_MOVE_E "Extruder" #define MSG_MOVE_E "Extruder"
#define MSG_MOVE_E1 "Extruder2" #define MSG_MOVE_E1 "Extruder2"
#define MSG_MOVE_E2 "Extruder3" #define MSG_MOVE_E2 "Extruder3"
#define MSG_MOVE_E3 "Extruder4"
#define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_01MM "Move 0.1mm"
#define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_1MM "Move 1mm"
#define MSG_MOVE_10MM "Move 10mm" #define MSG_MOVE_10MM "Move 10mm"
@ -50,12 +53,14 @@
#define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3" #define MSG_NOZZLE2 "Nozzle3"
#define MSG_NOZZLE3 "Nozzle4"
#define MSG_BED "Bed" #define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan speed" #define MSG_FAN_SPEED "Fan speed"
#define MSG_FLOW "Flow" #define MSG_FLOW "Flow"
#define MSG_FLOW0 "Flow 0" #define MSG_FLOW0 "Flow 0"
#define MSG_FLOW1 "Flow 1" #define MSG_FLOW1 "Flow 1"
#define MSG_FLOW2 "Flow 2" #define MSG_FLOW2 "Flow 2"
#define MSG_FLOW3 "Flow 3"
#define MSG_CONTROL "Control" #define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min" #define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max" #define MSG_MAX " \002 Max"
@ -75,6 +80,10 @@
#define MSG_PID_I2 "PID-I E3" #define MSG_PID_I2 "PID-I E3"
#define MSG_PID_D2 "PID-D E3" #define MSG_PID_D2 "PID-D E3"
#define MSG_PID_C2 "PID-C E3" #define MSG_PID_C2 "PID-C E3"
#define MSG_PID_P3 "PID-P E4"
#define MSG_PID_I3 "PID-I E4"
#define MSG_PID_D3 "PID-D E4"
#define MSG_PID_C3 "PID-C E4"
#define MSG_ACC "Accel" #define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
@ -99,6 +108,7 @@
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" #define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" #define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" #define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
#define MSG_CONTRAST "LCD contrast" #define MSG_CONTRAST "LCD contrast"
#define MSG_STORE_EPROM "Store memory" #define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory" #define MSG_LOAD_EPROM "Load memory"

14
Marlin/language_it.h
View File

@ -21,14 +21,16 @@
#define MSG_PREHEAT_PLA0 "Preriscalda PLA 1" #define MSG_PREHEAT_PLA0 "Preriscalda PLA 1"
#define MSG_PREHEAT_PLA1 "Preriscalda PLA 2" #define MSG_PREHEAT_PLA1 "Preriscalda PLA 2"
#define MSG_PREHEAT_PLA2 "Preriscalda PLA 3" #define MSG_PREHEAT_PLA2 "Preriscalda PLA 3"
#define MSG_PREHEAT_PLA012 "Prer. PLA Tutto" #define MSG_PREHEAT_PLA3 "Preriscalda PLA 4"
#define MSG_PREHEAT_PLA0123 "Prer. PLA Tutto"
#define MSG_PREHEAT_PLA_BEDONLY "Prer. PLA Piatto" #define MSG_PREHEAT_PLA_BEDONLY "Prer. PLA Piatto"
#define MSG_PREHEAT_PLA_SETTINGS "Config. prer. PLA" #define MSG_PREHEAT_PLA_SETTINGS "Config. prer. PLA"
#define MSG_PREHEAT_ABS "Preriscalda ABS" #define MSG_PREHEAT_ABS "Preriscalda ABS"
#define MSG_PREHEAT_ABS0 "Preriscalda ABS 1" #define MSG_PREHEAT_ABS0 "Preriscalda ABS 1"
#define MSG_PREHEAT_ABS1 "Preriscalda ABS 2" #define MSG_PREHEAT_ABS1 "Preriscalda ABS 2"
#define MSG_PREHEAT_ABS2 "Preriscalda ABS 3" #define MSG_PREHEAT_ABS2 "Preriscalda ABS 3"
#define MSG_PREHEAT_ABS012 "Prer. ABS Tutto" #define MSG_PREHEAT_ABS3 "Preriscalda ABS 4"
#define MSG_PREHEAT_ABS0123 "Prer. ABS Tutto"
#define MSG_PREHEAT_ABS_BEDONLY "Prer. ABS Piatto" #define MSG_PREHEAT_ABS_BEDONLY "Prer. ABS Piatto"
#define MSG_PREHEAT_ABS_SETTINGS "Config. prer. ABS" #define MSG_PREHEAT_ABS_SETTINGS "Config. prer. ABS"
#define MSG_COOLDOWN "Raffredda" #define MSG_COOLDOWN "Raffredda"
@ -43,6 +45,7 @@
#define MSG_MOVE_E "Estrusore" #define MSG_MOVE_E "Estrusore"
#define MSG_MOVE_E1 "Estrusore 2" #define MSG_MOVE_E1 "Estrusore 2"
#define MSG_MOVE_E2 "Estrusore 3" #define MSG_MOVE_E2 "Estrusore 3"
#define MSG_MOVE_E3 "Estrusore 4"
#define MSG_MOVE_01MM "Muovi di 0.1mm" #define MSG_MOVE_01MM "Muovi di 0.1mm"
#define MSG_MOVE_1MM "Muovi di 1mm" #define MSG_MOVE_1MM "Muovi di 1mm"
#define MSG_MOVE_10MM "Muovi di 10mm" #define MSG_MOVE_10MM "Muovi di 10mm"
@ -50,12 +53,14 @@
#define MSG_NOZZLE "Ugello" #define MSG_NOZZLE "Ugello"
#define MSG_NOZZLE1 "Ugello2" #define MSG_NOZZLE1 "Ugello2"
#define MSG_NOZZLE2 "Ugello3" #define MSG_NOZZLE2 "Ugello3"
#define MSG_NOZZLE3 "Ugello4"
#define MSG_BED "Piatto" #define MSG_BED "Piatto"
#define MSG_FAN_SPEED "Ventola" #define MSG_FAN_SPEED "Ventola"
#define MSG_FLOW "Flusso" #define MSG_FLOW "Flusso"
#define MSG_FLOW0 "Flusso 0" #define MSG_FLOW0 "Flusso 0"
#define MSG_FLOW1 "Flusso 1" #define MSG_FLOW1 "Flusso 1"
#define MSG_FLOW2 "Flusso 2" #define MSG_FLOW2 "Flusso 2"
#define MSG_FLOW3 "Flusso 3"
#define MSG_CONTROL "Controllo" #define MSG_CONTROL "Controllo"
#define MSG_MIN " \002 Min:" #define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:" #define MSG_MAX " \002 Max:"
@ -75,6 +80,10 @@
#define MSG_PID_I2 "PID-I E3" #define MSG_PID_I2 "PID-I E3"
#define MSG_PID_D2 "PID-D E3" #define MSG_PID_D2 "PID-D E3"
#define MSG_PID_C2 "PID-C E3" #define MSG_PID_C2 "PID-C E3"
#define MSG_PID_P3 "PID-P E4"
#define MSG_PID_I3 "PID-I E4"
#define MSG_PID_D3 "PID-D E4"
#define MSG_PID_C3 "PID-C E4"
#define MSG_ACC "Accel." #define MSG_ACC "Accel."
#define MSG_VXY_JERK "Vxy-jerk" #define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk" #define MSG_VZ_JERK "Vz-jerk"
@ -99,6 +108,7 @@
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Diam. filo 1" #define MSG_FILAMENT_SIZE_EXTRUDER_0 "Diam. filo 1"
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Diam. filo 2" #define MSG_FILAMENT_SIZE_EXTRUDER_1 "Diam. filo 2"
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Diam. filo 3" #define MSG_FILAMENT_SIZE_EXTRUDER_2 "Diam. filo 3"
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Diam. filo 4"
#define MSG_CONTRAST "Contrasto LCD" #define MSG_CONTRAST "Contrasto LCD"
#define MSG_STORE_EPROM "Salva in EEPROM" #define MSG_STORE_EPROM "Salva in EEPROM"
#define MSG_LOAD_EPROM "Carica da EEPROM" #define MSG_LOAD_EPROM "Carica da EEPROM"

16
Marlin/pins.h
View File

@ -2933,6 +2933,12 @@ Fan_2 2
#endif // CHEAPTRONIC #endif // CHEAPTRONIC
#ifndef HEATER_3_PIN
#define HEATER_3_PIN -1
#endif
#ifndef TEMP_3_PIN
#define TEMP_3_PIN -1
#endif
#ifndef KNOWN_BOARD #ifndef KNOWN_BOARD
#error Unknown MOTHERBOARD value in configuration.h #error Unknown MOTHERBOARD value in configuration.h
@ -2950,6 +2956,11 @@ Fan_2 2
#else #else
#define _E2_PINS #define _E2_PINS
#endif #endif
#if EXTRUDERS > 3
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, HEATER_3_PIN,
#else
#define _E3_PINS
#endif
#ifdef X_STOP_PIN #ifdef X_STOP_PIN
#if X_HOME_DIR < 0 #if X_HOME_DIR < 0
@ -2995,7 +3006,6 @@ Fan_2 2
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, PS_ON_PIN, \ #define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, PS_ON_PIN, \
HEATER_BED_PIN, FAN_PIN, \ HEATER_BED_PIN, FAN_PIN, \
_E0_PINS _E1_PINS _E2_PINS \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS \
analogInputToDigitalPin(TEMP_0_PIN), analogInputToDigitalPin(TEMP_1_PIN), analogInputToDigitalPin(TEMP_2_PIN), analogInputToDigitalPin(TEMP_BED_PIN) } analogInputToDigitalPin(TEMP_0_PIN), analogInputToDigitalPin(TEMP_1_PIN), analogInputToDigitalPin(TEMP_2_PIN), analogInputToDigitalPin(TEMP_3_PIN), analogInputToDigitalPin(TEMP_BED_PIN) }
#endif //__PINS_H #endif //__PINS_H

20
Marlin/planner.cpp
View File

@ -80,7 +80,7 @@ unsigned long axis_steps_per_sqr_second[NUM_AXIS];
matrix_3x3 plan_bed_level_matrix = { matrix_3x3 plan_bed_level_matrix = {
1.0, 0.0, 0.0, 1.0, 0.0, 0.0,
0.0, 1.0, 0.0, 0.0, 1.0, 0.0,
0.0, 0.0, 1.0, 0.0, 0.0, 1.0
}; };
#endif // #ifdef ENABLE_AUTO_BED_LEVELING #endif // #ifdef ENABLE_AUTO_BED_LEVELING
@ -96,7 +96,7 @@ float autotemp_factor=0.1;
bool autotemp_enabled=false; bool autotemp_enabled=false;
#endif #endif
unsigned char g_uc_extruder_last_move[3] = {0,0,0}; unsigned char g_uc_extruder_last_move[4] = {0,0,0,0};
//=========================================================================== //===========================================================================
//=================semi-private variables, used in inline functions ===== //=================semi-private variables, used in inline functions =====
@ -486,6 +486,7 @@ void check_axes_activity()
disable_e0(); disable_e0();
disable_e1(); disable_e1();
disable_e2(); disable_e2();
disable_e3();
} }
#if defined(FAN_PIN) && FAN_PIN > -1 #if defined(FAN_PIN) && FAN_PIN > -1
#ifdef FAN_KICKSTART_TIME #ifdef FAN_KICKSTART_TIME
@ -672,6 +673,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
if(g_uc_extruder_last_move[0] > 0) g_uc_extruder_last_move[0]--; if(g_uc_extruder_last_move[0] > 0) g_uc_extruder_last_move[0]--;
if(g_uc_extruder_last_move[1] > 0) g_uc_extruder_last_move[1]--; if(g_uc_extruder_last_move[1] > 0) g_uc_extruder_last_move[1]--;
if(g_uc_extruder_last_move[2] > 0) g_uc_extruder_last_move[2]--; if(g_uc_extruder_last_move[2] > 0) g_uc_extruder_last_move[2]--;
if(g_uc_extruder_last_move[3] > 0) g_uc_extruder_last_move[3]--;
switch(extruder) switch(extruder)
{ {
@ -681,6 +683,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
if(g_uc_extruder_last_move[1] == 0) disable_e1(); if(g_uc_extruder_last_move[1] == 0) disable_e1();
if(g_uc_extruder_last_move[2] == 0) disable_e2(); if(g_uc_extruder_last_move[2] == 0) disable_e2();
if(g_uc_extruder_last_move[3] == 0) disable_e3();
break; break;
case 1: case 1:
enable_e1(); enable_e1();
@ -688,6 +691,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
if(g_uc_extruder_last_move[0] == 0) disable_e0(); if(g_uc_extruder_last_move[0] == 0) disable_e0();
if(g_uc_extruder_last_move[2] == 0) disable_e2(); if(g_uc_extruder_last_move[2] == 0) disable_e2();
if(g_uc_extruder_last_move[3] == 0) disable_e3();
break; break;
case 2: case 2:
enable_e2(); enable_e2();
@ -695,6 +699,15 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
if(g_uc_extruder_last_move[0] == 0) disable_e0(); if(g_uc_extruder_last_move[0] == 0) disable_e0();
if(g_uc_extruder_last_move[1] == 0) disable_e1(); if(g_uc_extruder_last_move[1] == 0) disable_e1();
if(g_uc_extruder_last_move[3] == 0) disable_e3();
break;
case 3:
enable_e3();
g_uc_extruder_last_move[3] = BLOCK_BUFFER_SIZE*2;
if(g_uc_extruder_last_move[0] == 0) disable_e0();
if(g_uc_extruder_last_move[1] == 0) disable_e1();
if(g_uc_extruder_last_move[2] == 0) disable_e2();
break; break;
} }
} }
@ -703,6 +716,7 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
enable_e0(); enable_e0();
enable_e1(); enable_e1();
enable_e2(); enable_e2();
enable_e3();
} }
} }
@ -866,7 +880,7 @@ Having the real displacement of the head, we can calculate the total movement le
long min_xy_segment_time =min(max_x_segment_time, max_y_segment_time); long min_xy_segment_time =min(max_x_segment_time, max_y_segment_time);
if(min_xy_segment_time < MAX_FREQ_TIME) if(min_xy_segment_time < MAX_FREQ_TIME)
speed_factor = min(speed_factor, speed_factor * (float)min_xy_segment_time / (float)MAX_FREQ_TIME); speed_factor = min(speed_factor, speed_factor * (float)min_xy_segment_time / (float)MAX_FREQ_TIME);
#endif #endif // XY_FREQUENCY_LIMIT
// Correct the speed // Correct the speed
if( speed_factor < 1.0) if( speed_factor < 1.0)

38
Marlin/stepper.cpp
View File

@ -55,7 +55,7 @@ volatile static unsigned long step_events_completed; // The number of step event
#ifdef ADVANCE #ifdef ADVANCE
static long advance_rate, advance, final_advance = 0; static long advance_rate, advance, final_advance = 0;
static long old_advance = 0; static long old_advance = 0;
static long e_steps[3]; static long e_steps[4];
#endif #endif
static long acceleration_time, deceleration_time; static long acceleration_time, deceleration_time;
//static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate; //static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate;
@ -200,6 +200,8 @@ void checkHitEndstops()
setTargetHotend0(0); setTargetHotend0(0);
setTargetHotend1(0); setTargetHotend1(0);
setTargetHotend2(0); setTargetHotend2(0);
setTargetHotend3(0);
setTargetBed(0);
} }
#endif #endif
} }
@ -553,7 +555,7 @@ ISR(TIMER1_COMPA_vect)
#endif //ADVANCE #endif //ADVANCE
counter_x += current_block->steps_x; counter_x += current_block->steps_x;
#ifdef CONFIG_STEPPERS_TOSHIBA #ifdef CONFIG_STEPPERS_TOSHIBA
/* The toshiba stepper controller require much longer pulses /* The toshiba stepper controller require much longer pulses
* tjerfore we 'stage' decompose the pulses between high, and * tjerfore we 'stage' decompose the pulses between high, and
* low instead of doing each in turn. The extra tests add enough * low instead of doing each in turn. The extra tests add enough
@ -681,7 +683,7 @@ ISR(TIMER1_COMPA_vect)
WRITE_E_STEP(INVERT_E_STEP_PIN); WRITE_E_STEP(INVERT_E_STEP_PIN);
} }
#endif //!ADVANCE #endif //!ADVANCE
#endif #endif // CONFIG_STEPPERS_TOSHIBA
step_events_completed += 1; step_events_completed += 1;
if(step_events_completed >= current_block->step_event_count) break; if(step_events_completed >= current_block->step_event_count) break;
} }
@ -807,6 +809,22 @@ ISR(TIMER1_COMPA_vect)
} }
} }
#endif #endif
#if EXTRUDERS > 3
if (e_steps[3] != 0) {
WRITE(E3_STEP_PIN, INVERT_E_STEP_PIN);
if (e_steps[3] < 0) {
WRITE(E3_DIR_PIN, INVERT_E3_DIR);
e_steps[3]++;
WRITE(E3_STEP_PIN, !INVERT_E_STEP_PIN);
}
else if (e_steps[3] > 0) {
WRITE(E3_DIR_PIN, !INVERT_E3_DIR);
e_steps[3]--;
WRITE(E3_STEP_PIN, !INVERT_E_STEP_PIN);
}
}
#endif
} }
} }
#endif // ADVANCE #endif // ADVANCE
@ -846,6 +864,9 @@ void st_init()
#if defined(E2_DIR_PIN) && (E2_DIR_PIN > -1) #if defined(E2_DIR_PIN) && (E2_DIR_PIN > -1)
SET_OUTPUT(E2_DIR_PIN); SET_OUTPUT(E2_DIR_PIN);
#endif #endif
#if defined(E3_DIR_PIN) && (E3_DIR_PIN > -1)
SET_OUTPUT(E3_DIR_PIN);
#endif
//Initialize Enable Pins - steppers default to disabled. //Initialize Enable Pins - steppers default to disabled.
@ -887,6 +908,10 @@ void st_init()
SET_OUTPUT(E2_ENABLE_PIN); SET_OUTPUT(E2_ENABLE_PIN);
if(!E_ENABLE_ON) WRITE(E2_ENABLE_PIN,HIGH); if(!E_ENABLE_ON) WRITE(E2_ENABLE_PIN,HIGH);
#endif #endif
#if defined(E3_ENABLE_PIN) && (E3_ENABLE_PIN > -1)
SET_OUTPUT(E3_ENABLE_PIN);
if(!E_ENABLE_ON) WRITE(E3_ENABLE_PIN,HIGH);
#endif
//endstops and pullups //endstops and pullups
@ -977,6 +1002,11 @@ void st_init()
WRITE(E2_STEP_PIN,INVERT_E_STEP_PIN); WRITE(E2_STEP_PIN,INVERT_E_STEP_PIN);
disable_e2(); disable_e2();
#endif #endif
#if defined(E3_STEP_PIN) && (E3_STEP_PIN > -1)
SET_OUTPUT(E3_STEP_PIN);
WRITE(E3_STEP_PIN,INVERT_E_STEP_PIN);
disable_e3();
#endif
// waveform generation = 0100 = CTC // waveform generation = 0100 = CTC
TCCR1B &= ~(1<<WGM13); TCCR1B &= ~(1<<WGM13);
@ -1007,6 +1037,7 @@ void st_init()
e_steps[0] = 0; e_steps[0] = 0;
e_steps[1] = 0; e_steps[1] = 0;
e_steps[2] = 0; e_steps[2] = 0;
e_steps[3] = 0;
TIMSK0 |= (1<<OCIE0A); TIMSK0 |= (1<<OCIE0A);
#endif //ADVANCE #endif //ADVANCE
@ -1068,6 +1099,7 @@ void finishAndDisableSteppers()
disable_e0(); disable_e0();
disable_e1(); disable_e1();
disable_e2(); disable_e2();
disable_e3();
} }
void quickStop() void quickStop()

6
Marlin/stepper.h
View File

@ -23,7 +23,11 @@
#include "planner.h" #include "planner.h"
#if EXTRUDERS > 2 #if EXTRUDERS > 3
#define WRITE_E_STEP(v) { if(current_block->active_extruder == 3) { WRITE(E3_STEP_PIN, v); } else { if(current_block->active_extruder == 2) { WRITE(E2_STEP_PIN, v); } else { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}}}
#define NORM_E_DIR() { if(current_block->active_extruder == 3) { WRITE(E3_DIR_PIN, !INVERT_E3_DIR); } else { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, !INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}}}
#define REV_E_DIR() { if(current_block->active_extruder == 3) { WRITE(E3_DIR_PIN, INVERT_E3_DIR); } else { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}}}
#elif EXTRUDERS > 2
#define WRITE_E_STEP(v) { if(current_block->active_extruder == 2) { WRITE(E2_STEP_PIN, v); } else { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}} #define WRITE_E_STEP(v) { if(current_block->active_extruder == 2) { WRITE(E2_STEP_PIN, v); } else { if(current_block->active_extruder == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}}
#define NORM_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, !INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}} #define NORM_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, !INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}}
#define REV_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}} #define REV_E_DIR() { if(current_block->active_extruder == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}}

218
Marlin/temperature.cpp
View File

@ -115,14 +115,16 @@ static volatile bool temp_meas_ready = false;
static unsigned long extruder_autofan_last_check; static unsigned long extruder_autofan_last_check;
#endif #endif
#if EXTRUDERS > 3 #if EXTRUDERS > 4
# error Unsupported number of extruders # error Unsupported number of extruders
#elif EXTRUDERS > 3
# define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3, v4 }
#elif EXTRUDERS > 2 #elif EXTRUDERS > 2
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1, v2, v3 } # define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2, v3 }
#elif EXTRUDERS > 1 #elif EXTRUDERS > 1
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1, v2 } # define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1, v2 }
#else #else
# define ARRAY_BY_EXTRUDERS(v1, v2, v3) { v1 } # define ARRAY_BY_EXTRUDERS(v1, v2, v3, v4) { v1 }
#endif #endif
#ifdef PIDTEMP #ifdef PIDTEMP
@ -144,10 +146,10 @@ static volatile bool temp_meas_ready = false;
#endif //PIDTEMP #endif //PIDTEMP
// Init min and max temp with extreme values to prevent false errors during startup // Init min and max temp with extreme values to prevent false errors during startup
static int minttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP ); static int minttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP);
static int maxttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP ); static int maxttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP);
static int minttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 0, 0, 0 ); static int minttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 0, 0, 0, 0 );
static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 16383, 16383, 16383 ); static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 16383, 16383, 16383, 16383 );
//static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP; /* No bed mintemp error implemented?!? */ //static int bed_minttemp_raw = HEATER_BED_RAW_LO_TEMP; /* No bed mintemp error implemented?!? */
#ifdef BED_MAXTEMP #ifdef BED_MAXTEMP
static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP; static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
@ -157,8 +159,8 @@ static int bed_maxttemp_raw = HEATER_BED_RAW_HI_TEMP;
static void *heater_ttbl_map[2] = {(void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE }; static void *heater_ttbl_map[2] = {(void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE };
static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN }; static uint8_t heater_ttbllen_map[2] = { HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN };
#else #else
static void *heater_ttbl_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( (void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE, (void *)HEATER_2_TEMPTABLE ); static void *heater_ttbl_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( (void *)HEATER_0_TEMPTABLE, (void *)HEATER_1_TEMPTABLE, (void *)HEATER_2_TEMPTABLE, (void *)HEATER_3_TEMPTABLE );
static uint8_t heater_ttbllen_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN ); static uint8_t heater_ttbllen_map[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_TEMPTABLE_LEN, HEATER_1_TEMPTABLE_LEN, HEATER_2_TEMPTABLE_LEN, HEATER_3_TEMPTABLE_LEN );
#endif #endif
static float analog2temp(int raw, uint8_t e); static float analog2temp(int raw, uint8_t e);
@ -166,8 +168,8 @@ static float analog2tempBed(int raw);
static void updateTemperaturesFromRawValues(); static void updateTemperaturesFromRawValues();
#ifdef WATCH_TEMP_PERIOD #ifdef WATCH_TEMP_PERIOD
int watch_start_temp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0); int watch_start_temp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0,0);
unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0); unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0,0);
#endif //WATCH_TEMP_PERIOD #endif //WATCH_TEMP_PERIOD
#ifndef SOFT_PWM_SCALE #ifndef SOFT_PWM_SCALE
@ -200,7 +202,8 @@ void PID_autotune(float temp, int extruder, int ncycles)
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \ #if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \ (defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1) (defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1)
unsigned long extruder_autofan_last_check = millis(); unsigned long extruder_autofan_last_check = millis();
#endif #endif
@ -243,7 +246,8 @@ void PID_autotune(float temp, int extruder, int ncycles)
#if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \ #if (defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \ (defined(EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_1_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1) (defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1) || \
(defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1)
if(millis() - extruder_autofan_last_check > 2500) { if(millis() - extruder_autofan_last_check > 2500) {
checkExtruderAutoFans(); checkExtruderAutoFans();
extruder_autofan_last_check = millis(); extruder_autofan_last_check = millis();
@ -420,6 +424,19 @@ void checkExtruderAutoFans()
fanState |= 4; fanState |= 4;
} }
#endif #endif
#if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
if (current_temperature[3] > EXTRUDER_AUTO_FAN_TEMPERATURE)
{
if (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_0_AUTO_FAN_PIN)
fanState |= 1;
else if (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_1_AUTO_FAN_PIN)
fanState |= 2;
else if (EXTRUDER_3_AUTO_FAN_PIN == EXTRUDER_2_AUTO_FAN_PIN)
fanState |= 4;
else
fanState |= 8;
}
#endif
// update extruder auto fan states // update extruder auto fan states
#if defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1 #if defined(EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_0_AUTO_FAN_PIN > -1
@ -434,6 +451,12 @@ void checkExtruderAutoFans()
&& EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0); setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0);
#endif #endif
#if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1
if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
&& EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0);
#endif
} }
#endif // any extruder auto fan pins set #endif // any extruder auto fan pins set
@ -837,6 +860,9 @@ void tp_init()
#if defined(HEATER_2_PIN) && (HEATER_2_PIN > -1) #if defined(HEATER_2_PIN) && (HEATER_2_PIN > -1)
SET_OUTPUT(HEATER_2_PIN); SET_OUTPUT(HEATER_2_PIN);
#endif #endif
#if defined(HEATER_3_PIN) && (HEATER_3_PIN > -1)
SET_OUTPUT(HEATER_3_PIN);
#endif
#if defined(HEATER_BED_PIN) && (HEATER_BED_PIN > -1) #if defined(HEATER_BED_PIN) && (HEATER_BED_PIN > -1)
SET_OUTPUT(HEATER_BED_PIN); SET_OUTPUT(HEATER_BED_PIN);
#endif #endif
@ -897,6 +923,13 @@ void tp_init()
DIDR2 |= 1<<(TEMP_2_PIN - 8); DIDR2 |= 1<<(TEMP_2_PIN - 8);
#endif #endif
#endif #endif
#if defined(TEMP_3_PIN) && (TEMP_3_PIN > -1)
#if TEMP_3_PIN < 8
DIDR0 |= 1 << TEMP_3_PIN;
#else
DIDR2 |= 1<<(TEMP_3_PIN - 8);
#endif
#endif
#if defined(TEMP_BED_PIN) && (TEMP_BED_PIN > -1) #if defined(TEMP_BED_PIN) && (TEMP_BED_PIN > -1)
#if TEMP_BED_PIN < 8 #if TEMP_BED_PIN < 8
DIDR0 |= 1<<TEMP_BED_PIN; DIDR0 |= 1<<TEMP_BED_PIN;
@ -987,6 +1020,28 @@ void tp_init()
} }
#endif //MAXTEMP 2 #endif //MAXTEMP 2
#if (EXTRUDERS > 3) && defined(HEATER_3_MINTEMP)
minttemp[3] = HEATER_3_MINTEMP;
while(analog2temp(minttemp_raw[3], 3) < HEATER_3_MINTEMP) {
#if HEATER_3_RAW_LO_TEMP < HEATER_3_RAW_HI_TEMP
minttemp_raw[3] += OVERSAMPLENR;
#else
minttemp_raw[3] -= OVERSAMPLENR;
#endif
}
#endif //MINTEMP 3
#if (EXTRUDERS > 3) && defined(HEATER_3_MAXTEMP)
maxttemp[3] = HEATER_3_MAXTEMP;
while(analog2temp(maxttemp_raw[3], 3) > HEATER_3_MAXTEMP) {
#if HEATER_3_RAW_LO_TEMP < HEATER_3_RAW_HI_TEMP
maxttemp_raw[3] -= OVERSAMPLENR;
#else
maxttemp_raw[3] += OVERSAMPLENR;
#endif
}
#endif // MAXTEMP 3
#ifdef BED_MINTEMP #ifdef BED_MINTEMP
/* No bed MINTEMP error implemented?!? */ /* /* No bed MINTEMP error implemented?!? */ /*
while(analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) { while(analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
@ -1075,6 +1130,7 @@ void thermal_runaway_protection(int *state, unsigned long *timer, float temperat
disable_e0(); disable_e0();
disable_e1(); disable_e1();
disable_e2(); disable_e2();
disable_e3();
manage_heater(); manage_heater();
lcd_update(); lcd_update();
} }
@ -1113,6 +1169,15 @@ void disable_heater()
#endif #endif
#endif #endif
#if defined(TEMP_3_PIN) && TEMP_3_PIN > -1 && EXTRUDERS > 3
target_temperature[3]=0;
soft_pwm[3]=0;
#if defined(HEATER_3_PIN) && HEATER_3_PIN > -1
WRITE(HEATER_3_PIN,LOW);
#endif
#endif
#if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1 #if defined(TEMP_BED_PIN) && TEMP_BED_PIN > -1
target_temperature_bed=0; target_temperature_bed=0;
soft_pwm_bed=0; soft_pwm_bed=0;
@ -1227,8 +1292,9 @@ ISR(TIMER0_COMPB_vect)
static unsigned long raw_temp_0_value = 0; static unsigned long raw_temp_0_value = 0;
static unsigned long raw_temp_1_value = 0; static unsigned long raw_temp_1_value = 0;
static unsigned long raw_temp_2_value = 0; static unsigned long raw_temp_2_value = 0;
static unsigned long raw_temp_3_value = 0;
static unsigned long raw_temp_bed_value = 0; static unsigned long raw_temp_bed_value = 0;
static unsigned char temp_state = 10; static unsigned char temp_state = 12;
static unsigned char pwm_count = (1 << SOFT_PWM_SCALE); static unsigned char pwm_count = (1 << SOFT_PWM_SCALE);
static unsigned char soft_pwm_0; static unsigned char soft_pwm_0;
#ifdef SLOW_PWM_HEATERS #ifdef SLOW_PWM_HEATERS
@ -1236,6 +1302,7 @@ ISR(TIMER0_COMPB_vect)
static unsigned char state_heater_0 = 0; static unsigned char state_heater_0 = 0;
static unsigned char state_timer_heater_0 = 0; static unsigned char state_timer_heater_0 = 0;
#endif #endif
#if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL) #if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL)
static unsigned char soft_pwm_1; static unsigned char soft_pwm_1;
#ifdef SLOW_PWM_HEATERS #ifdef SLOW_PWM_HEATERS
@ -1250,6 +1317,14 @@ ISR(TIMER0_COMPB_vect)
static unsigned char state_timer_heater_2 = 0; static unsigned char state_timer_heater_2 = 0;
#endif #endif
#endif #endif
#if EXTRUDERS > 3
static unsigned char soft_pwm_3;
#ifdef SLOW_PWM_HEATERS
static unsigned char state_heater_3 = 0;
static unsigned char state_timer_heater_3 = 0;
#endif
#endif
#if HEATER_BED_PIN > -1 #if HEATER_BED_PIN > -1
static unsigned char soft_pwm_b; static unsigned char soft_pwm_b;
#ifdef SLOW_PWM_HEATERS #ifdef SLOW_PWM_HEATERS
@ -1283,6 +1358,12 @@ ISR(TIMER0_COMPB_vect)
soft_pwm_2 = soft_pwm[2]; soft_pwm_2 = soft_pwm[2];
if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1); else WRITE(HEATER_2_PIN,0); if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1); else WRITE(HEATER_2_PIN,0);
#endif #endif
#if EXTRUDERS > 3
soft_pwm_3 = soft_pwm[3];
if(soft_pwm_3 > 0) WRITE(HEATER_3_PIN,1); else WRITE(HEATER_3_PIN,0);
#endif
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1 #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
soft_pwm_b = soft_pwm_bed; soft_pwm_b = soft_pwm_bed;
if(soft_pwm_b > 0) WRITE(HEATER_BED_PIN,1); else WRITE(HEATER_BED_PIN,0); if(soft_pwm_b > 0) WRITE(HEATER_BED_PIN,1); else WRITE(HEATER_BED_PIN,0);
@ -1298,12 +1379,17 @@ ISR(TIMER0_COMPB_vect)
WRITE(HEATER_1_PIN,0); WRITE(HEATER_1_PIN,0);
#endif #endif
} }
#if EXTRUDERS > 1 #if EXTRUDERS > 1
if(soft_pwm_1 < pwm_count) WRITE(HEATER_1_PIN,0); if(soft_pwm_1 < pwm_count) WRITE(HEATER_1_PIN,0);
#endif #endif
#if EXTRUDERS > 2 #if EXTRUDERS > 2
if(soft_pwm_2 < pwm_count) WRITE(HEATER_2_PIN,0); if(soft_pwm_2 < pwm_count) WRITE(HEATER_2_PIN,0);
#endif #endif
#if EXTRUDERS > 3
if(soft_pwm_3 < pwm_count) WRITE(HEATER_3_PIN,0);
#endif
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1 #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
if(soft_pwm_b < pwm_count) WRITE(HEATER_BED_PIN,0); if(soft_pwm_b < pwm_count) WRITE(HEATER_BED_PIN,0);
#endif #endif
@ -1406,6 +1492,32 @@ ISR(TIMER0_COMPB_vect)
} }
#endif #endif
#if EXTRUDERS > 3
// EXTRUDER 3
soft_pwm_3 = soft_pwm[3];
if (soft_pwm_3 > 0) {
// turn ON heather only if the minimum time is up
if (state_timer_heater_3 == 0) {
// if change state set timer
if (state_heater_3 == 0) {
state_timer_heater_3 = MIN_STATE_TIME;
}
state_heater_3 = 1;
WRITE(HEATER_3_PIN, 1);
}
} else {
// turn OFF heather only if the minimum time is up
if (state_timer_heater_3 == 0) {
// if change state set timer
if (state_heater_3 == 1) {
state_timer_heater_3 = MIN_STATE_TIME;
}
state_heater_3 = 0;
WRITE(HEATER_3_PIN, 0);
}
}
#endif
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1 #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
// BED // BED
soft_pwm_b = soft_pwm_bed; soft_pwm_b = soft_pwm_bed;
@ -1479,6 +1591,21 @@ ISR(TIMER0_COMPB_vect)
} }
#endif #endif
#if EXTRUDERS > 3
// EXTRUDER 3
if (soft_pwm_3 < slow_pwm_count) {
// turn OFF heather only if the minimum time is up
if (state_timer_heater_3 == 0) {
// if change state set timer
if (state_heater_3 == 1) {
state_timer_heater_3 = MIN_STATE_TIME;
}
state_heater_3 = 0;
WRITE(HEATER_3_PIN, 0);
}
}
#endif
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1 #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
// BED // BED
if (soft_pwm_b < slow_pwm_count) { if (soft_pwm_b < slow_pwm_count) {
@ -1527,6 +1654,12 @@ ISR(TIMER0_COMPB_vect)
state_timer_heater_2--; state_timer_heater_2--;
#endif #endif
#if EXTRUDERS > 3
// Extruder 3
if (state_timer_heater_3 > 0)
state_timer_heater_3--;
#endif
#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1 #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
// Bed // Bed
if (state_timer_heater_b > 0) if (state_timer_heater_b > 0)
@ -1614,10 +1747,28 @@ ISR(TIMER0_COMPB_vect)
#if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1) #if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
raw_temp_2_value += ADC; raw_temp_2_value += ADC;
#endif #endif
temp_state = 8;//change so that Filament Width is also measured temp_state = 8;
break; break;
case 8: //Prepare FILWIDTH case 8: // Prepare TEMP_3
#if defined(TEMP_3_PIN) && (TEMP_3_PIN > -1)
#if TEMP_3_PIN > 7
ADCSRB = 1<<MUX5;
#else
ADCSRB = 0;
#endif
ADMUX = ((1 << REFS0) | (TEMP_3_PIN & 0x07));
ADCSRA |= 1<<ADSC; // Start conversion
#endif
lcd_buttons_update();
temp_state = 9;
break;
case 9: // Measure TEMP_3
#if defined(TEMP_3_PIN) && (TEMP_3_PIN > -1)
raw_temp_3_value += ADC;
#endif
temp_state = 10; //change so that Filament Width is also measured
break;
case 10: //Prepare FILWIDTH
#if defined(FILWIDTH_PIN) && (FILWIDTH_PIN> -1) #if defined(FILWIDTH_PIN) && (FILWIDTH_PIN> -1)
#if FILWIDTH_PIN>7 #if FILWIDTH_PIN>7
ADCSRB = 1<<MUX5; ADCSRB = 1<<MUX5;
@ -1628,9 +1779,9 @@ ISR(TIMER0_COMPB_vect)
ADCSRA |= 1<<ADSC; // Start conversion ADCSRA |= 1<<ADSC; // Start conversion
#endif #endif
lcd_buttons_update(); lcd_buttons_update();
temp_state = 9; temp_state = 11;
break; break;
case 9: //Measure FILWIDTH case 11: //Measure FILWIDTH
#if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1) #if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1)
//raw_filwidth_value += ADC; //remove to use an IIR filter approach //raw_filwidth_value += ADC; //remove to use an IIR filter approach
if(ADC>102) //check that ADC is reading a voltage > 0.5 volts, otherwise don't take in the data. if(ADC>102) //check that ADC is reading a voltage > 0.5 volts, otherwise don't take in the data.
@ -1646,7 +1797,7 @@ ISR(TIMER0_COMPB_vect)
break; break;
case 10: //Startup, delay initial temp reading a tiny bit so the hardware can settle. case 12: //Startup, delay initial temp reading a tiny bit so the hardware can settle.
temp_state = 0; temp_state = 0;
break; break;
// default: // default:
@ -1668,6 +1819,9 @@ ISR(TIMER0_COMPB_vect)
#endif #endif
#if EXTRUDERS > 2 #if EXTRUDERS > 2
current_temperature_raw[2] = raw_temp_2_value; current_temperature_raw[2] = raw_temp_2_value;
#endif
#if EXTRUDERS > 3
current_temperature_raw[3] = raw_temp_3_value;
#endif #endif
current_temperature_bed_raw = raw_temp_bed_value; current_temperature_bed_raw = raw_temp_bed_value;
} }
@ -1683,6 +1837,7 @@ ISR(TIMER0_COMPB_vect)
raw_temp_0_value = 0; raw_temp_0_value = 0;
raw_temp_1_value = 0; raw_temp_1_value = 0;
raw_temp_2_value = 0; raw_temp_2_value = 0;
raw_temp_3_value = 0;
raw_temp_bed_value = 0; raw_temp_bed_value = 0;
#if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP #if HEATER_0_RAW_LO_TEMP > HEATER_0_RAW_HI_TEMP
@ -1699,6 +1854,8 @@ ISR(TIMER0_COMPB_vect)
#endif #endif
min_temp_error(0); min_temp_error(0);
} }
#if EXTRUDERS > 1 #if EXTRUDERS > 1
#if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP #if HEATER_1_RAW_LO_TEMP > HEATER_1_RAW_HI_TEMP
if(current_temperature_raw[1] <= maxttemp_raw[1]) { if(current_temperature_raw[1] <= maxttemp_raw[1]) {
@ -1731,6 +1888,23 @@ ISR(TIMER0_COMPB_vect)
min_temp_error(2); min_temp_error(2);
} }
#endif #endif
#if EXTRUDERS > 3
#if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP
if(current_temperature_raw[3] <= maxttemp_raw[3]) {
#else
if(current_temperature_raw[3] >= maxttemp_raw[3]) {
#endif
max_temp_error(3);
}
#if HEATER_3_RAW_LO_TEMP > HEATER_3_RAW_HI_TEMP
if(current_temperature_raw[3] >= minttemp_raw[3]) {
#else
if(current_temperature_raw[3] <= minttemp_raw[3]) {
#endif
min_temp_error(3);
}
#endif
/* No bed MINTEMP error? */ /* No bed MINTEMP error? */
#if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0) #if defined(BED_MAXTEMP) && (TEMP_SENSOR_BED != 0)
@ -1790,5 +1964,3 @@ float unscalePID_d(float d)
} }
#endif //PIDTEMP #endif //PIDTEMP

22
Marlin/temperature.h
View File

@ -159,6 +159,15 @@ FORCE_INLINE bool isCoolingBed() {
#define setTargetHotend2(_celsius) do{}while(0) #define setTargetHotend2(_celsius) do{}while(0)
#endif #endif
#if EXTRUDERS > 3 #if EXTRUDERS > 3
#define degHotend3() degHotend(3)
#define degTargetHotend3() degTargetHotend(3)
#define setTargetHotend3(_celsius) setTargetHotend((_celsius), 3)
#define isHeatingHotend3() isHeatingHotend(3)
#define isCoolingHotend3() isCoolingHotend(3)
#else
#define setTargetHotend3(_celsius) do{}while(0)
#endif
#if EXTRUDERS > 4
#error Invalid number of extruders #error Invalid number of extruders
#endif #endif
@ -171,24 +180,24 @@ void updatePID();
#if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0 #if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0
void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc); void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
static int thermal_runaway_state_machine[3]; // = {0,0,0}; static int thermal_runaway_state_machine[4]; // = {0,0,0,0};
static unsigned long thermal_runaway_timer[3]; // = {0,0,0}; static unsigned long thermal_runaway_timer[4]; // = {0,0,0,0};
static bool thermal_runaway = false; static bool thermal_runaway = false;
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
static int thermal_runaway_bed_state_machine; static int thermal_runaway_bed_state_machine;
static unsigned long thermal_runaway_bed_timer; static unsigned long thermal_runaway_bed_timer;
#endif #endif
#endif #endif
FORCE_INLINE void autotempShutdown(){ FORCE_INLINE void autotempShutdown(){
#ifdef AUTOTEMP #ifdef AUTOTEMP
if(autotemp_enabled) if(autotemp_enabled)
{ {
autotemp_enabled=false; autotemp_enabled=false;
if(degTargetHotend(active_extruder)>autotemp_min) if(degTargetHotend(active_extruder)>autotemp_min)
setTargetHotend(0,active_extruder); setTargetHotend(0,active_extruder);
} }
#endif #endif
} }
void PID_autotune(float temp, int extruder, int ncycles); void PID_autotune(float temp, int extruder, int ncycles);
@ -197,4 +206,3 @@ void setExtruderAutoFanState(int pin, bool state);
void checkExtruderAutoFans(); void checkExtruderAutoFans();
#endif #endif

69
Marlin/thermistortables.h
View File

@ -5,7 +5,7 @@
#define OVERSAMPLENR 16 #define OVERSAMPLENR 16
#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORBED == 1) //100k bed thermistor #if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORHEATER_3 == 1) || (THERMISTORBED == 1) //100k bed thermistor
const short temptable_1[][2] PROGMEM = { const short temptable_1[][2] PROGMEM = {
{ 23*OVERSAMPLENR , 300 }, { 23*OVERSAMPLENR , 300 },
@ -71,7 +71,7 @@ const short temptable_1[][2] PROGMEM = {
{ 1008*OVERSAMPLENR , 0 } //safety { 1008*OVERSAMPLENR , 0 } //safety
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORBED == 2) //200k bed thermistor #if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORHEATER_3 == 2) || (THERMISTORBED == 2) //200k bed thermistor
const short temptable_2[][2] PROGMEM = { const short temptable_2[][2] PROGMEM = {
//200k ATC Semitec 204GT-2 //200k ATC Semitec 204GT-2
//Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf //Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
@ -111,7 +111,7 @@ const short temptable_2[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORBED == 3) //mendel-parts #if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORHEATER_3 == 3) || (THERMISTORBED == 3) //mendel-parts
const short temptable_3[][2] PROGMEM = { const short temptable_3[][2] PROGMEM = {
{1*OVERSAMPLENR,864}, {1*OVERSAMPLENR,864},
{21*OVERSAMPLENR,300}, {21*OVERSAMPLENR,300},
@ -144,7 +144,7 @@ const short temptable_3[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORBED == 4) //10k thermistor #if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORHEATER_3 == 4) || (THERMISTORBED == 4) //10k thermistor
const short temptable_4[][2] PROGMEM = { const short temptable_4[][2] PROGMEM = {
{1*OVERSAMPLENR, 430}, {1*OVERSAMPLENR, 430},
{54*OVERSAMPLENR, 137}, {54*OVERSAMPLENR, 137},
@ -169,7 +169,7 @@ const short temptable_4[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2) #if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORHEATER_3 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
const short temptable_5[][2] PROGMEM = { const short temptable_5[][2] PROGMEM = {
// ATC Semitec 104GT-2 (Used in ParCan) // ATC Semitec 104GT-2 (Used in ParCan)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
@ -209,7 +209,7 @@ const short temptable_5[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor #if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORHEATER_3 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
const short temptable_6[][2] PROGMEM = { const short temptable_6[][2] PROGMEM = {
{1*OVERSAMPLENR, 350}, {1*OVERSAMPLENR, 350},
{28*OVERSAMPLENR, 250}, //top rating 250C {28*OVERSAMPLENR, 250}, //top rating 250C
@ -252,7 +252,7 @@ const short temptable_6[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01 #if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORHEATER_3 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
const short temptable_7[][2] PROGMEM = { const short temptable_7[][2] PROGMEM = {
{1*OVERSAMPLENR, 941}, {1*OVERSAMPLENR, 941},
{19*OVERSAMPLENR, 362}, {19*OVERSAMPLENR, 362},
@ -315,7 +315,7 @@ const short temptable_7[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 71) || (THERMISTORHEATER_1 == 71) || (THERMISTORHEATER_2 == 71) || (THERMISTORBED == 71) // 100k Honeywell 135-104LAF-J01 #if (THERMISTORHEATER_0 == 71) || (THERMISTORHEATER_1 == 71) || (THERMISTORHEATER_2 == 71) || (THERMISTORHEATER_3 == 71) || (THERMISTORBED == 71) // 100k Honeywell 135-104LAF-J01
// R0 = 100000 Ohm // R0 = 100000 Ohm
// T0 = 25 °C // T0 = 25 °C
// Beta = 3974 // Beta = 3974
@ -466,7 +466,7 @@ const short temptable_71[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORBED == 8) #if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORHEATER_3 == 8) || (THERMISTORBED == 8)
// 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) // 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
const short temptable_8[][2] PROGMEM = { const short temptable_8[][2] PROGMEM = {
{1*OVERSAMPLENR, 704}, {1*OVERSAMPLENR, 704},
@ -491,7 +491,7 @@ const short temptable_8[][2] PROGMEM = {
{1008*OVERSAMPLENR, 0} {1008*OVERSAMPLENR, 0}
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORBED == 9) #if (THERMISTORHEATER_0 == 9) || (THERMISTORHEATER_1 == 9) || (THERMISTORHEATER_2 == 9) || (THERMISTORHEATER_3 == 9) || (THERMISTORBED == 9)
// 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) // 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
const short temptable_9[][2] PROGMEM = { const short temptable_9[][2] PROGMEM = {
{1*OVERSAMPLENR, 936}, {1*OVERSAMPLENR, 936},
@ -527,7 +527,7 @@ const short temptable_9[][2] PROGMEM = {
{1016*OVERSAMPLENR, 0} {1016*OVERSAMPLENR, 0}
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORBED == 10) #if (THERMISTORHEATER_0 == 10) || (THERMISTORHEATER_1 == 10) || (THERMISTORHEATER_2 == 10) || (THERMISTORHEATER_3 == 10) || (THERMISTORBED == 10)
// 100k RS thermistor 198-961 (4.7k pullup) // 100k RS thermistor 198-961 (4.7k pullup)
const short temptable_10[][2] PROGMEM = { const short temptable_10[][2] PROGMEM = {
{1*OVERSAMPLENR, 929}, {1*OVERSAMPLENR, 929},
@ -564,7 +564,7 @@ const short temptable_10[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORBED == 11) #if (THERMISTORHEATER_0 == 11) || (THERMISTORHEATER_1 == 11) || (THERMISTORHEATER_2 == 11) || (THERMISTORHEATER_3 == 11) || (THERMISTORBED == 11)
// QU-BD silicone bed QWG-104F-3950 thermistor // QU-BD silicone bed QWG-104F-3950 thermistor
const short temptable_11[][2] PROGMEM = { const short temptable_11[][2] PROGMEM = {
@ -621,7 +621,7 @@ const short temptable_11[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORBED == 13) #if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORHEATER_3 == 13) || (THERMISTORBED == 13)
// Hisens thermistor B25/50 =3950 +/-1% // Hisens thermistor B25/50 =3950 +/-1%
const short temptable_13[][2] PROGMEM = { const short temptable_13[][2] PROGMEM = {
@ -705,6 +705,10 @@ This does not match the normal thermistor behaviour so we need to set the follow
# define HEATER_2_RAW_HI_TEMP 16383 # define HEATER_2_RAW_HI_TEMP 16383
# define HEATER_2_RAW_LO_TEMP 0 # define HEATER_2_RAW_LO_TEMP 0
#endif #endif
#if (THERMISTORHEATER_3 == 20)
# define HEATER_3_RAW_HI_TEMP 16383
# define HEATER_3_RAW_LO_TEMP 0
#endif
#if (THERMISTORBED == 20) #if (THERMISTORBED == 20)
# define HEATER_BED_RAW_HI_TEMP 16383 # define HEATER_BED_RAW_HI_TEMP 16383
# define HEATER_BED_RAW_LO_TEMP 0 # define HEATER_BED_RAW_LO_TEMP 0
@ -762,7 +766,7 @@ const short temptable_20[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORBED == 51) #if (THERMISTORHEATER_0 == 51) || (THERMISTORHEATER_1 == 51) || (THERMISTORHEATER_2 == 51) || (THERMISTORHEATER_3 == 51) || (THERMISTORBED == 51)
// 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) // 100k EPCOS (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. // Verified by linagee.
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
@ -824,7 +828,7 @@ const short temptable_51[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORBED == 52) #if (THERMISTORHEATER_0 == 52) || (THERMISTORHEATER_1 == 52) || (THERMISTORHEATER_2 == 52) || (THERMISTORHEATER_3 == 52) || (THERMISTORBED == 52)
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
@ -865,7 +869,7 @@ const short temptable_52[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORBED == 55) #if (THERMISTORHEATER_0 == 55) || (THERMISTORHEATER_1 == 55) || (THERMISTORHEATER_2 == 55) || (THERMISTORHEATER_3 == 55) || (THERMISTORBED == 55)
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf // Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
@ -906,7 +910,7 @@ const short temptable_55[][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 60) || (THERMISTORHEATER_1 == 60) || (THERMISTORHEATER_2 == 60) || (THERMISTORBED == 60) // Maker's Tool Works Kapton Bed Thermister #if (THERMISTORHEATER_0 == 60) || (THERMISTORHEATER_1 == 60) || (THERMISTORHEATER_2 == 60) || (THERMISTORHEATER_3 == 60) || (THERMISTORBED == 60) // Maker's Tool Works Kapton Bed Thermister
// ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950 // ./createTemperatureLookup.py --r0=100000 --t0=25 --r1=0 --r2=4700 --beta=3950
// r0: 100000 // r0: 100000
// t0: 25 // t0: 25
@ -1037,7 +1041,7 @@ const short temptable_12[][2] PROGMEM = {
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1)) #define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
#define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T }, #define PtLine(T,R0,Rup) { PtAdVal(T,R0,Rup)*OVERSAMPLENR, T },
#if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup #if (THERMISTORHEATER_0 == 110) || (THERMISTORHEATER_1 == 110) || (THERMISTORHEATER_2 == 110) || (THERMISTORHEATER_3 == 110) || (THERMISTORBED == 110) // Pt100 with 1k0 pullup
const short temptable_110[][2] PROGMEM = { const short temptable_110[][2] PROGMEM = {
// only few values are needed as the curve is very flat // only few values are needed as the curve is very flat
PtLine(0,100,1000) PtLine(0,100,1000)
@ -1049,7 +1053,7 @@ const short temptable_110[][2] PROGMEM = {
PtLine(300,100,1000) PtLine(300,100,1000)
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup #if (THERMISTORHEATER_0 == 147) || (THERMISTORHEATER_1 == 147) || (THERMISTORHEATER_2 == 147) || (THERMISTORHEATER_3 == 147) || (THERMISTORBED == 147) // Pt100 with 4k7 pullup
const short temptable_147[][2] PROGMEM = { const short temptable_147[][2] PROGMEM = {
// only few values are needed as the curve is very flat // only few values are needed as the curve is very flat
PtLine(0,100,4700) PtLine(0,100,4700)
@ -1061,7 +1065,7 @@ const short temptable_147[][2] PROGMEM = {
PtLine(300,100,4700) PtLine(300,100,4700)
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup #if (THERMISTORHEATER_0 == 1010) || (THERMISTORHEATER_1 == 1010) || (THERMISTORHEATER_2 == 1010) || (THERMISTORHEATER_3 == 1010) || (THERMISTORBED == 1010) // Pt1000 with 1k0 pullup
const short temptable_1010[][2] PROGMEM = { const short temptable_1010[][2] PROGMEM = {
PtLine(0,1000,1000) PtLine(0,1000,1000)
PtLine(25,1000,1000) PtLine(25,1000,1000)
@ -1078,7 +1082,7 @@ const short temptable_1010[][2] PROGMEM = {
PtLine(300,1000,1000) PtLine(300,1000,1000)
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup #if (THERMISTORHEATER_0 == 1047) || (THERMISTORHEATER_1 == 1047) || (THERMISTORHEATER_2 == 1047) || (THERMISTORHEATER_3 == 1047) || (THERMISTORBED == 1047) // Pt1000 with 4k7 pullup
const short temptable_1047[][2] PROGMEM = { const short temptable_1047[][2] PROGMEM = {
// only few values are needed as the curve is very flat // only few values are needed as the curve is very flat
PtLine(0,1000,4700) PtLine(0,1000,4700)
@ -1163,6 +1167,29 @@ const short temptable_1047[][2] PROGMEM = {
# endif # endif
#endif #endif
#ifdef THERMISTORHEATER_3
# define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
# define HEATER_3_TEMPTABLE_LEN (sizeof(HEATER_3_TEMPTABLE)/sizeof(*HEATER_3_TEMPTABLE))
#else
# ifdef HEATER_3_USES_THERMISTOR
# error No heater 3 thermistor table specified
# else // HEATER_3_USES_THERMISTOR
# define HEATER_3_TEMPTABLE NULL
# define HEATER_3_TEMPTABLE_LEN 0
# endif // HEATER_3_USES_THERMISTOR
#endif
//Set the high and low raw values for the heater, this indicates which raw value is a high or low temperature
#ifndef HEATER_3_RAW_HI_TEMP
# ifdef HEATER_3_USES_THERMISTOR //In case of a thermistor the highest temperature results in the lowest ADC value
# define HEATER_3_RAW_HI_TEMP 0
# define HEATER_3_RAW_LO_TEMP 16383
# else //In case of an thermocouple the highest temperature results in the highest ADC value
# define HEATER_3_RAW_HI_TEMP 16383
# define HEATER_3_RAW_LO_TEMP 0
# endif
#endif
#ifdef THERMISTORBED #ifdef THERMISTORBED
# define BEDTEMPTABLE TT_NAME(THERMISTORBED) # define BEDTEMPTABLE TT_NAME(THERMISTORBED)
# define BEDTEMPTABLE_LEN (sizeof(BEDTEMPTABLE)/sizeof(*BEDTEMPTABLE)) # define BEDTEMPTABLE_LEN (sizeof(BEDTEMPTABLE)/sizeof(*BEDTEMPTABLE))

76
Marlin/ultralcd.cpp
View File

@ -431,6 +431,11 @@ static void lcd_tune_menu()
#if TEMP_SENSOR_2 != 0 #if TEMP_SENSOR_2 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
#endif #endif
#if TEMP_SENSOR_3 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE3, &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
#endif #endif
@ -443,6 +448,10 @@ static void lcd_tune_menu()
#if TEMP_SENSOR_2 != 0 #if TEMP_SENSOR_2 != 0
MENU_ITEM_EDIT(int3, MSG_FLOW2, &extruder_multiply[2], 10, 999); MENU_ITEM_EDIT(int3, MSG_FLOW2, &extruder_multiply[2], 10, 999);
#endif #endif
#if TEMP_SENSOR_3 != 0
MENU_ITEM_EDIT(int3, MSG_FLOW3, &extruder_multiply[3], 10, 999);
#endif
#ifdef BABYSTEPPING #ifdef BABYSTEPPING
#ifdef BABYSTEP_XY #ifdef BABYSTEP_XY
@ -515,23 +524,46 @@ void lcd_preheat_abs2()
} }
#endif //3 extruder preheat #endif //3 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //more than one extruder present #if TEMP_SENSOR_3 != 0 //4 extruder preheat
void lcd_preheat_pla012() void lcd_preheat_pla3()
{ {
setTargetHotend0(plaPreheatHotendTemp); setTargetHotend3(plaPreheatHotendTemp);
setTargetHotend1(plaPreheatHotendTemp);
setTargetHotend2(plaPreheatHotendTemp);
setTargetBed(plaPreheatHPBTemp); setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed; fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status(); lcd_return_to_status();
setWatch(); // heater sanity check timer setWatch(); // heater sanity check timer
} }
void lcd_preheat_abs012() void lcd_preheat_abs3()
{
setTargetHotend3(absPreheatHotendTemp);
setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
#endif //4 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 //more than one extruder present
void lcd_preheat_pla0123()
{
setTargetHotend0(plaPreheatHotendTemp);
setTargetHotend1(plaPreheatHotendTemp);
setTargetHotend2(plaPreheatHotendTemp);
setTargetHotend3(plaPreheatHotendTemp);
setTargetBed(plaPreheatHPBTemp);
fanSpeed = plaPreheatFanSpeed;
lcd_return_to_status();
setWatch(); // heater sanity check timer
}
void lcd_preheat_abs0123()
{ {
setTargetHotend0(absPreheatHotendTemp); setTargetHotend0(absPreheatHotendTemp);
setTargetHotend1(absPreheatHotendTemp); setTargetHotend1(absPreheatHotendTemp);
setTargetHotend2(absPreheatHotendTemp); setTargetHotend2(absPreheatHotendTemp);
setTargetHotend3(absPreheatHotendTemp);
setTargetBed(absPreheatHPBTemp); setTargetBed(absPreheatHPBTemp);
fanSpeed = absPreheatFanSpeed; fanSpeed = absPreheatFanSpeed;
lcd_return_to_status(); lcd_return_to_status();
@ -566,9 +598,12 @@ static void lcd_preheat_pla_menu()
#if TEMP_SENSOR_2 != 0 //3 extruder preheat #if TEMP_SENSOR_2 != 0 //3 extruder preheat
MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2); MENU_ITEM(function, MSG_PREHEAT_PLA2, lcd_preheat_pla2);
#endif //3 extruder preheat #endif //3 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat #if TEMP_SENSOR_3 != 0 //4 extruder preheat
MENU_ITEM(function, MSG_PREHEAT_PLA012, lcd_preheat_pla012); MENU_ITEM(function, MSG_PREHEAT_PLA3, lcd_preheat_pla3);
#endif //2 extruder preheat #endif //4 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 //all extruder preheat
MENU_ITEM(function, MSG_PREHEAT_PLA0123, lcd_preheat_pla0123);
#endif //all extruder preheat
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly); MENU_ITEM(function, MSG_PREHEAT_PLA_BEDONLY, lcd_preheat_pla_bedonly);
#endif #endif
@ -586,9 +621,13 @@ static void lcd_preheat_abs_menu()
#if TEMP_SENSOR_2 != 0 //3 extruder preheat #if TEMP_SENSOR_2 != 0 //3 extruder preheat
MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2); MENU_ITEM(function, MSG_PREHEAT_ABS2, lcd_preheat_abs2);
#endif //3 extruder preheat #endif //3 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 //all extruder preheat #if TEMP_SENSOR_3 != 0 //4 extruder preheat
MENU_ITEM(function, MSG_PREHEAT_ABS012, lcd_preheat_abs012); MENU_ITEM(function, MSG_PREHEAT_ABS3, lcd_preheat_abs3);
#endif //2 extruder preheat #endif //4 extruder preheat
#if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_3 != 0 //all extruder preheat
MENU_ITEM(function, MSG_PREHEAT_ABS0123, lcd_preheat_abs0123);
#endif //all extruder preheat
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly); MENU_ITEM(function, MSG_PREHEAT_ABS_BEDONLY, lcd_preheat_abs_bedonly);
#endif #endif
@ -600,6 +639,7 @@ void lcd_cooldown()
setTargetHotend0(0); setTargetHotend0(0);
setTargetHotend1(0); setTargetHotend1(0);
setTargetHotend2(0); setTargetHotend2(0);
setTargetHotend3(0);
setTargetBed(0); setTargetBed(0);
fanSpeed = 0; fanSpeed = 0;
lcd_return_to_status(); lcd_return_to_status();
@ -777,6 +817,9 @@ static void lcd_control_temperature_menu()
#if TEMP_SENSOR_2 != 0 #if TEMP_SENSOR_2 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_NOZZLE2, &target_temperature[2], 0, HEATER_2_MAXTEMP - 15);
#endif #endif
#if TEMP_SENSOR_3 != 0
MENU_ITEM_EDIT(int3, MSG_NOZZLE3, &target_temperature[3], 0, HEATER_3_MAXTEMP - 15);
#endif
#if TEMP_SENSOR_BED != 0 #if TEMP_SENSOR_BED != 0
MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15); MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
#endif #endif
@ -916,13 +959,15 @@ static void lcd_control_volumetric_menu()
MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers); MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#if EXTRUDERS > 2 #if EXTRUDERS > 2
MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers); MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#endif #if EXTRUDERS > 3
#endif MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_3, &filament_size[3], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
#endif //EXTRUDERS > 3
#endif //EXTRUDERS > 2
#endif //EXTRUDERS > 1
} }
END_MENU(); END_MENU();
} }
#ifdef DOGLCD #ifdef DOGLCD
static void lcd_set_contrast() static void lcd_set_contrast()
{ {
@ -962,7 +1007,6 @@ static void lcd_control_retract_menu()
MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999); MENU_ITEM_EDIT(float3, MSG_CONTROL_RETRACT_RECOVERF, &retract_recover_feedrate, 1, 999);
END_MENU(); END_MENU();
} }
#endif //FWRETRACT #endif //FWRETRACT
#if SDCARDDETECT == -1 #if SDCARDDETECT == -1

4
Marlin/ultralcd.h
View File

@ -46,9 +46,9 @@
extern bool cancel_heatup; extern bool cancel_heatup;
#ifdef FILAMENT_LCD_DISPLAY #ifdef FILAMENT_LCD_DISPLAY
extern unsigned long message_millis; extern unsigned long message_millis;
#endif #endif
void lcd_buzz(long duration,uint16_t freq); void lcd_buzz(long duration,uint16_t freq);
bool lcd_clicked(); bool lcd_clicked();