Marlin/ini/stm32f4.ini

#
# Marlin Firmware
# PlatformIO Configuration File
#

#################################
#
# STM32F4 Architecture
#
# Naming Example: STM32F401RGT6
#
#   F : Foundation (sometimes High Performance F2/F4)
#   4 : Cortex M4 core
#  01 : Line/Features
#   R : 64 or 66 pins  (T:36, C:48 or 49, M:81, V:100, Z:144, I:176)
#   G : 1024KB Flash-memory  (B:128KB, C:256KB, D:384KB, E:512KB)
#   T : LQFP package
#   6 : -40...85°C   (7: ...105°C)
#
#################################

#
# ARMED (STM32)
#
[env:ARMED]
platform      = ${common_stm32.platform}
extends       = common_stm32
board         = armed_v1
build_flags   = ${common_stm32.build_flags}
                -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing

#
# STM32F401VE
# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
#
[env:STM32F401VE_STEVAL]
platform          = ${common_stm32.platform}
extends           = stm32_variant
board             = marlin_STEVAL_STM32F401VE
build_flags       = ${stm32_variant.build_flags}
                    -DSTM32F401xE -DDISABLE_GENERIC_SERIALUSB
                    -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS

#
# STM32F401RC
#
[env:FYSETC_CHEETAH_V20]
platform           = ${common_stm32.platform}
extends            = stm32_variant
board              = marlin_FYSETC_CHEETAH_V20
board_build.offset = 0xC000
build_flags        = ${stm32_variant.build_flags} -DSTM32F401xC

#
# FLYF407ZG
#
[env:FLYF407ZG]
platform            = ${common_stm32.platform}
extends             = stm32_variant
board               = marlin_STM32F407ZGT6
board_build.variant = MARLIN_FLY_F407ZG
board_build.offset  = 0x8000
upload_protocol     = dfu

#
# FYSETC S6 (STM32F446RET6 ARM Cortex-M4)
#
[env:FYSETC_S6]
platform                    = ${common_stm32.platform}
extends                     = stm32_variant
board                       = marlin_fysetc_s6
board_build.offset          = 0x10000
board_upload.offset_address = 0x08010000
build_flags                 = ${stm32_variant.build_flags} -DHAL_PCD_MODULE_ENABLED
debug_tool                  = stlink
upload_protocol             = dfu
upload_command              = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"

#
# FYSETC S6 new bootloader
#
[env:FYSETC_S6_8000]
platform                    = ${common_stm32.platform}
extends                     = env:FYSETC_S6
board                       = marlin_fysetc_s6_8000
board_build.offset          = 0x8000
board_upload.offset_address = 0x08008000
upload_command              = dfu-util -a 0 -s 0x08008000:leave -D "$SOURCE"

#
# STM32F407VET6 with RAMPS-like shield
# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
# Shield - https://github.com/jmz52/Hardware
#
[env:STM32F407VE_black]
platform          = ${common_stm32.platform}
extends           = stm32_variant
board             = marlin_blackSTM32F407VET6
build_flags       = ${stm32_variant.build_flags}
                    -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS

#
# Anet ET4-MB_V1.x/ET4P-MB_V1.x (STM32F407VGT6 ARM Cortex-M4)
# For use with with davidtgbe's OpenBLT bootloader https://github.com/davidtgbe/openblt/releases
# Comment out board_build.offset = 0x10000 if you don't plan to use OpenBLT/flashing directly to 0x08000000.
#
[env:Anet_ET4_OpenBLT]
platform                    = ${common_stm32.platform}
extends                     = stm32_variant
board                       = marlin_STM32F407VGT6_CCM
board_build.variant         = MARLIN_F4x7Vx
board_build.encrypt         = firmware.srec
board_build.offset          = 0x10000
board_upload.offset_address = 0x08010000
build_flags                 = ${stm32_variant.build_flags}
                              -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED
build_unflags               = ${stm32_variant.build_unflags}
                              -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
extra_scripts               = ${stm32_variant.extra_scripts}
                              buildroot/share/PlatformIO/scripts/openblt.py
debug_tool                  = jlink
upload_protocol             = jlink

#
# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
#
[env:BIGTREE_SKR_PRO]
platform           = ${common_stm32.platform}
extends            = stm32_variant
board              = marlin_BigTree_SKR_Pro
board_build.offset = 0x8000
build_flags        = ${stm32_variant.build_flags} -DSTM32F407_5ZX
debug_tool         = stlink
upload_protocol    = stlink

#
# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_SKR_PRO_usb_flash_drive]
platform          = ${common_stm32.platform}
extends           = env:BIGTREE_SKR_PRO
platform_packages = ${stm_flash_drive.platform_packages}
build_flags       = ${stm_flash_drive.build_flags} -DSTM32F407_5ZX
build_unflags     = ${env:BIGTREE_SKR_PRO.build_unflags} -DUSBCON -DUSBD_USE_CDC

#
# BigTreeTech E3 RRF (STM32F407VGT6 ARM Cortex-M4)
#
[env:BIGTREE_E3_RRF]
platform            = ${common_stm32.platform}
extends             = stm32_variant
board               = marlin_STM32F407VGT6_CCM
board_build.variant = MARLIN_BIGTREE_E3_RRF
board_build.offset  = 0x8000
build_flags         = ${stm32_variant.build_flags}
                      -DSTM32F407_5VX
                      -DMF_RX_BUFFER_SIZE=255
                      -DMF_TX_BUFFER_SIZE=255

#
# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
#
[env:BIGTREE_GTR_V1_0]
platform           = ${common_stm32.platform}
extends            = stm32_variant
board              = marlin_BigTree_GTR_v1
board_build.offset = 0x8000
build_flags        = ${stm32_variant.build_flags} -DSTM32F407IX

#
# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_GTR_V1_0_usb_flash_drive]
platform          = ${common_stm32.platform}
extends           = env:BIGTREE_GTR_V1_0
platform_packages = ${stm_flash_drive.platform_packages}
build_flags       = ${stm_flash_drive.build_flags} -DSTM32F407IX
build_unflags     = ${env:BIGTREE_GTR_V1_0.build_unflags} -DUSBCON -DUSBD_USE_CDC

#
# BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4)
#
[env:BIGTREE_BTT002]
platform           = ${common_stm32.platform}
extends            = stm32_variant
board              = marlin_BigTree_BTT002
board_build.offset = 0x8000
build_flags        = ${stm32_variant.build_flags}
                     -DSTM32F407_5VX
                     -DHAVE_HWSERIAL2
                     -DHAVE_HWSERIAL3
                     -DPIN_SERIAL2_RX=PD_6
                     -DPIN_SERIAL2_TX=PD_5

#
# BigTreeTech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_SKR_2]
platform                    = ${common_stm32.platform}
extends                     = stm32_variant
platform_packages           = ${stm_flash_drive.platform_packages}
board                       = marlin_STM32F407VGT6_CCM
board_build.variant         = MARLIN_F4x7Vx
board_build.offset          = 0x8000
board_upload.offset_address = 0x08008000
build_flags                 = ${stm_flash_drive.build_flags}
                              -DUSE_USBHOST_HS -DUSE_USB_HS_IN_FS
                              -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6
                              -DHSE_VALUE=8000000U -DHAL_SD_MODULE_ENABLED

#
# BigTreeTech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Media Share Support
#
[env:BIGTREE_SKR_2_USB]
platform          = ${common_stm32.platform}
extends           = env:BIGTREE_SKR_2
build_flags       = ${env:BIGTREE_SKR_2.build_flags} -DUSBD_USE_CDC_MSC
build_unflags     = ${env:BIGTREE_SKR_2.build_unflags} -DUSBD_USE_CDC

#
# BigTreeTech Octopus V1.0/1.1 (STM32F446ZET6 ARM Cortex-M4)
#
[env:BIGTREE_OCTOPUS_V1]
platform           = ${common_stm32.platform}
extends            = stm32_variant
board              = marlin_BigTree_Octopus_v1
board_build.offset = 0x8000
build_flags        = ${stm32_variant.build_flags}
                     -DSTM32F446_5VX -DUSE_USB_HS_IN_FS

#
# BigTreeTech Octopus V1.0/1.1 (STM32F446ZET6 ARM Cortex-M4) with USB Flash Drive Support
#
[env:BIGTREE_OCTOPUS_V1_USB]
platform          = ${common_stm32.platform}
extends           = env:BIGTREE_OCTOPUS_V1
platform_packages = ${stm_flash_drive.platform_packages}
build_unflags     = -DUSBD_USE_CDC
build_flags       = ${stm_flash_drive.build_flags}
                    -DSTM32F446_5VX -DUSE_USB_HS_IN_FS
                    -DUSE_USBHOST_HS -DUSBD_IRQ_PRIO=5
                    -DUSBD_IRQ_SUBPRIO=6
                    -DUSBD_USE_CDC_MSC

#
# Lerdge base
#
[lerdge_common]
platform            = ${common_stm32.platform}
extends             = stm32_variant
board               = marlin_STM32F407ZGT6
board_build.variant = MARLIN_LERDGE
board_build.encrypt = firmware.bin
board_build.offset  = 0x10000
build_flags         = ${stm32_variant.build_flags}
                      -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
                      -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
                      -DHAL_SRAM_MODULE_ENABLED
build_unflags       = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
extra_scripts       = ${stm32_variant.extra_scripts}
                      buildroot/share/PlatformIO/scripts/lerdge.py

#
# Lerdge X
#
[env:LERDGEX]
platform            = ${lerdge_common.platform}
extends             = lerdge_common
board_build.encrypt = Lerdge_X_firmware_force.bin

#
# Lerdge X with USB Flash Drive Support
#
[env:LERDGEX_usb_flash_drive]
platform          = ${env:LERDGEX.platform}
extends           = env:LERDGEX
platform_packages = ${stm_flash_drive.platform_packages}
build_flags       = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}

#
# Lerdge S
#
[env:LERDGES]
platform            = ${lerdge_common.platform}
extends             = lerdge_common
board_build.encrypt = Lerdge_firmware_force.bin

#
# Lerdge S with USB Flash Drive Support
#
[env:LERDGES_usb_flash_drive]
platform          = ${env:LERDGES.platform}
extends           = env:LERDGES
platform_packages = ${stm_flash_drive.platform_packages}
build_flags       = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}

#
# Lerdge K
#
[env:LERDGEK]
platform            = ${lerdge_common.platform}
extends             = lerdge_common
board_build.encrypt = Lerdge_K_firmware_force.bin
build_flags         = ${lerdge_common.build_flags} -DLERDGEK

#
# Lerdge K with USB Flash Drive Support
#
[env:LERDGEK_usb_flash_drive]
platform          = ${env:LERDGEK.platform}
extends           = env:LERDGEK
platform_packages = ${stm_flash_drive.platform_packages}
build_flags       = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}

#
# RUMBA32
#
[env:rumba32]
platform             = ${common_stm32.platform}
extends              = stm32_variant
board                = rumba32_f446ve
board_build.variant  = MARLIN_F446VE
board_build.offset   = 0x0000
build_flags          = ${stm32_variant.build_flags}
                       -Os -DHAL_PCD_MODULE_ENABLED
                       -DDISABLE_GENERIC_SERIALUSB
                       -DHAL_UART_MODULE_ENABLED
                       -DTIMER_SERIAL=TIM9
monitor_speed        = 500000
upload_protocol      = dfu

#
# MKS Robin Pro V2
#
[env:mks_robin_pro2]
platform                    = ${common_stm32.platform}
extends                     = stm32_variant
platform_packages           = ${stm_flash_drive.platform_packages}
board                       = genericSTM32F407VET6
board_build.variant         = MARLIN_F4x7Vx
board_build.offset          = 0x0000
board_upload.offset_address = 0x08000000
build_flags                 = ${stm_flash_drive.build_flags}
build_unflags               = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC
debug_tool                  = jlink
upload_protocol             = jlink

#
# This I2C1(PB6:I2C1_SCL PB7:I2C1_SDA) is used by Robin Nano V3
#
[stm32f4_I2C1]
build_flags = -DPIN_WIRE_SCL=PB6 -DPIN_WIRE_SDA=PB7

#
# MKS Robin Nano V3
#
[env:mks_robin_nano_v3]
platform                    = ${common_stm32.platform}
extends                     = stm32_variant
board                       = marlin_STM32F407VGT6_CCM
board_build.variant         = MARLIN_F4x7Vx
board_build.offset          = 0xC000
board_upload.offset_address = 0x0800C000
board_build.rename          = Robin_nano_v3.bin
build_flags                 = ${stm32_variant.build_flags} ${stm32f4_I2C1.build_flags}
                              -DHAL_PCD_MODULE_ENABLED
debug_tool                  = jlink
upload_protocol             = jlink

#
# MKS Robin Nano V3 with USB Flash Drive Support
# Currently, using a STM32duino fork, until USB Host get merged
#
[env:mks_robin_nano_v3_usb_flash_drive]
platform          = ${common_stm32.platform}
extends           = env:mks_robin_nano_v3
platform_packages = ${stm_flash_drive.platform_packages}
build_flags       = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags}
                    -DUSE_USBHOST_HS
                    -DUSBD_IRQ_PRIO=5
                    -DUSBD_IRQ_SUBPRIO=6
                    -DUSE_USB_HS_IN_FS

#
# MKS Robin Nano V3 with USB Flash Drive Support and Shared Media
# Currently, using a STM32duino fork, until USB Host and USB Device MSC get merged
#
[env:mks_robin_nano_v3_usb_flash_drive_msc]
platform          = ${common_stm32.platform}
extends           = env:mks_robin_nano_v3_usb_flash_drive
build_flags       = ${env:mks_robin_nano_v3_usb_flash_drive.build_flags}
                    -DUSBD_USE_CDC_MSC
build_unflags     = -DUSBD_USE_CDC

#
# This I2C1(PB8:I2C1_SCL PB9:I2C1_SDA) is used by MKS Monster8
#
[stm32f4_I2C1_CAN]
build_flags = -DPIN_WIRE_SCL=PB8 -DPIN_WIRE_SDA=PB9

#
# MKS Monster8
#
[env:mks_monster8]
platform                    = ${common_stm32.platform}
extends                     = stm32_variant
board                       = marlin_STM32F407VGT6_CCM
board_build.variant         = MARLIN_F4x7Vx
board_build.offset          = 0xC000
board_upload.offset_address = 0x0800C000
board_build.rename          = mks_monster8.bin
build_flags                 = ${stm32_variant.build_flags} ${stm32f4_I2C1_CAN.build_flags}
                              -DHAL_PCD_MODULE_ENABLED
debug_tool                  = jlink
upload_protocol             = jlink

#
# MKS Monster8 with USB Flash Drive Support
# Currently, using a STM32duino fork, until USB Host get merged
#
[env:mks_monster8_usb_flash_drive]
platform          = ${common_stm32.platform}
extends           = env:mks_monster8
platform_packages = ${stm_flash_drive.platform_packages}
build_flags       = ${stm_flash_drive.build_flags} ${stm32f4_I2C1_CAN.build_flags}
                    -DUSE_USBHOST_HS
                    -DUSBD_IRQ_PRIO=5
                    -DUSBD_IRQ_SUBPRIO=6
                    -DUSE_USB_HS_IN_FS

#
# MKS Monster8 with USB Flash Drive Support and Shared Media
# Currently, using a STM32duino fork, until USB Host and USB Device MSC get merged
#
[env:mks_monster8_usb_flash_drive_msc]
platform          = ${common_stm32.platform}
extends           = env:mks_monster8_usb_flash_drive
build_flags       = ${env:mks_monster8_usb_flash_drive.build_flags}
                    -DUSBD_USE_CDC_MSC
build_unflags     = -DUSBD_USE_CDC