You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
424 lines
20 KiB
C
424 lines
20 KiB
C
4 years ago
|
/*
|
||
|
|
*******************************************************************************
|
||
|
|
* Copyright (c) 2020, STMicroelectronics
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||
|
|
* the "License"; You may not use this file except in compliance with the
|
||
|
|
* License. You may obtain a copy of the License at:
|
||
|
|
* opensource.org/licenses/BSD-3-Clause
|
||
|
|
*
|
||
|
|
*******************************************************************************
|
||
|
|
* Automatically generated from STM32F103R(F-G)Tx.xml
|
||
|
|
*/
|
||
|
|
#include "Arduino.h"
|
||
|
|
#include "PeripheralPins.h"
|
||
|
|
|
||
|
|
/* =====
|
||
|
|
* Note: Commented lines are alternative possibilities which are not used per default.
|
||
|
|
* If you change them, you will have to know what you do
|
||
|
|
* =====
|
||
|
|
*/
|
||
|
|
|
||
|
|
//*** ADC ***
|
||
|
|
|
||
|
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_ADC[] = {
|
||
|
|
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||
|
|
// {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||
|
|
#endif
|
||
|
|
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||
|
|
// {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||
|
|
#endif
|
||
|
|
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||
|
|
// {PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||
|
|
#endif
|
||
|
|
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||
|
|
// {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
|
||
|
|
#endif
|
||
|
|
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||
|
|
// {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||
|
|
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||
|
|
// {PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
|
||
|
|
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||
|
|
// {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||
|
|
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||
|
|
// {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||
|
|
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||
|
|
// {PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
|
||
|
|
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||
|
|
// {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||
|
|
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||
|
|
// {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
|
||
|
|
#endif
|
||
|
|
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||
|
|
// {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
|
||
|
|
#endif
|
||
|
|
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||
|
|
// {PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
|
||
|
|
#endif
|
||
|
|
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||
|
|
// {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
|
||
|
|
#endif
|
||
|
|
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||
|
|
// {PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
|
||
|
|
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||
|
|
// {PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*** DAC ***
|
||
|
|
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_DAC[] = {
|
||
|
|
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||
|
|
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*** I2C ***
|
||
|
|
|
||
|
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||
|
|
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
|
||
|
|
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_ENABLE)},
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||
|
|
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
|
||
|
|
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_I2C1_ENABLE)},
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*** PWM ***
|
||
|
|
|
||
|
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_PWM[] = {
|
||
|
|
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM2_CH1
|
||
|
|
// {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 1, 0)}, // TIM2_CH1
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM5_CH1
|
||
|
|
#endif
|
||
|
|
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM2_CH2
|
||
|
|
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 2, 0)}, // TIM2_CH2
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM5_CH2
|
||
|
|
#endif
|
||
|
|
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM2_CH3
|
||
|
|
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 3, 0)}, // TIM2_CH3
|
||
|
|
#if defined(STM32F103xG)
|
||
|
|
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM5_CH3
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM9_CH1
|
||
|
|
#endif
|
||
|
|
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 4, 0)}, // TIM2_CH4
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM5_CH4
|
||
|
|
#else
|
||
|
|
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM2_CH4
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xG)
|
||
|
|
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM9_CH2
|
||
|
|
#endif
|
||
|
|
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM3_CH1
|
||
|
|
#if defined(STM32F103xG)
|
||
|
|
// {PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM13_CH1
|
||
|
|
#endif
|
||
|
|
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM3_CH2
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM8_CH1N
|
||
|
|
#else
|
||
|
|
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 1)}, // TIM1_CH1N
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xG)
|
||
|
|
// {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM14_CH1
|
||
|
|
#endif
|
||
|
|
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM1_CH1
|
||
|
|
// {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 1, 0)}, // TIM1_CH1
|
||
|
|
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM1_CH2
|
||
|
|
// {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 0)}, // TIM1_CH2
|
||
|
|
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM1_CH3
|
||
|
|
// {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 0)}, // TIM1_CH3
|
||
|
|
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM1_CH4
|
||
|
|
// {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 4, 0)}, // TIM1_CH4
|
||
|
|
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 1, 0)}, // TIM2_CH1
|
||
|
|
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 1, 0)}, // TIM2_CH1
|
||
|
|
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 2, 1)}, // TIM1_CH2N
|
||
|
|
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM3_CH3
|
||
|
|
// {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 3, 0)}, // TIM3_CH3
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM8_CH2N
|
||
|
|
#endif
|
||
|
|
{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM1_PARTIAL, 3, 1)}, // TIM1_CH3N
|
||
|
|
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM3_CH4
|
||
|
|
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 4, 0)}, // TIM3_CH4
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM8_CH3N
|
||
|
|
#endif
|
||
|
|
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_1, 2, 0)}, // TIM2_CH2
|
||
|
|
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 2, 0)}, // TIM2_CH2
|
||
|
|
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 1, 0)}, // TIM3_CH1
|
||
|
|
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_PARTIAL, 2, 0)}, // TIM3_CH2
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM4_CH1
|
||
|
|
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM4_CH2
|
||
|
|
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM4_CH3
|
||
|
|
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM4_CH4
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xG)
|
||
|
|
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM10_CH1
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xG)
|
||
|
|
// {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM11_CH1
|
||
|
|
#endif
|
||
|
|
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 3, 0)}, // TIM2_CH3
|
||
|
|
// {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 3, 0)}, // TIM2_CH3
|
||
|
|
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_PARTIAL_2, 4, 0)}, // TIM2_CH4
|
||
|
|
// {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM2_ENABLE, 4, 0)}, // TIM2_CH4
|
||
|
|
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 1)}, // TIM1_CH1N
|
||
|
|
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 1)}, // TIM1_CH2N
|
||
|
|
#if defined(STM32F103xG)
|
||
|
|
// {PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM12_CH1
|
||
|
|
#endif
|
||
|
|
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 1)}, // TIM1_CH3N
|
||
|
|
#if defined(STM32F103xG)
|
||
|
|
// {PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM12_CH2
|
||
|
|
#endif
|
||
|
|
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 1, 0)}, // TIM3_CH1
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 1, 0)}, // TIM8_CH1
|
||
|
|
#endif
|
||
|
|
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 2, 0)}, // TIM3_CH2
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 2, 0)}, // TIM8_CH2
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 3, 0)}, // TIM8_CH3
|
||
|
|
#else
|
||
|
|
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 3, 0)}, // TIM3_CH3
|
||
|
|
#endif
|
||
|
|
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_TIM3_ENABLE, 4, 0)}, // TIM3_CH4
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
// {PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE, 4, 0)}, // TIM8_CH4
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*** SERIAL ***
|
||
|
|
|
||
|
|
#ifdef HAL_UART_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_UART_TX[] = {
|
||
|
|
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART1_ENABLE)},
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xB)
|
||
|
|
{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAL_UART_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_UART_RX[] = {
|
||
|
|
{PA_3, USART2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
{PA_10, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
{PB_7, USART1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART1_ENABLE)},
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_11, USART3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PC_11, UART4, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xB)
|
||
|
|
{PC_11, USART3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_USART3_PARTIAL)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PD_2, UART5, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAL_UART_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_UART_RTS[] = {
|
||
|
|
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAL_UART_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_UART_CTS[] = {
|
||
|
|
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_USART3_PARTIAL)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*** SPI ***
|
||
|
|
|
||
|
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||
|
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#else
|
||
|
|
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||
|
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#else
|
||
|
|
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||
|
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#else
|
||
|
|
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||
|
|
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#else
|
||
|
|
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_SPI1_ENABLE)},
|
||
|
|
#endif
|
||
|
|
#if defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)},
|
||
|
|
#endif
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*** CAN ***
|
||
|
|
|
||
|
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_CAN_RD[] = {
|
||
|
|
{PA_11, CAN1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)},
|
||
|
|
{PB_8, CAN1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_CAN1_2)},
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
#ifdef HAL_CAN_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_CAN_TD[] = {
|
||
|
|
{PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)},
|
||
|
|
{PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_CAN1_2)},
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*** No ETHERNET ***
|
||
|
|
|
||
|
|
//*** No QUADSPI ***
|
||
|
|
|
||
|
|
//*** USB ***
|
||
|
|
|
||
|
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_USB[] = {
|
||
|
|
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DM
|
||
|
|
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, AFIO_NONE)}, // USB_DP
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
|
||
|
|
//*** No USB_OTG_FS ***
|
||
|
|
|
||
|
|
//*** No USB_OTG_HS ***
|
||
|
|
|
||
|
|
//*** SD ***
|
||
|
|
|
||
|
|
#if defined(STM32F103xE) || defined(STM32F103xG)
|
||
|
|
#ifdef HAL_SD_MODULE_ENABLED
|
||
|
|
WEAK const PinMap PinMap_SD[] = {
|
||
|
|
{PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D4
|
||
|
|
{PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D5
|
||
|
|
{PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D6
|
||
|
|
{PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D7
|
||
|
|
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D0
|
||
|
|
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D1
|
||
|
|
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D2
|
||
|
|
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, AFIO_NONE)}, // SDIO_D3
|
||
|
|
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, // SDIO_CK
|
||
|
|
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)}, // SDIO_CMD
|
||
|
|
{NC, NP, 0}
|
||
|
|
};
|
||
|
|
#endif
|
||
|
|
#endif
|